From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 2bde7c32b1db162692f05c6be066b5bcd3d9fdbe ]
The power table addresses should be contiguous, but there was a hole where 0x34 was missing. On most devices this is not a problem as addresses above 0x34 are used for the BUC# convertors which are not used in the DSDTs I've access to but after the BUC# convertors there is a field named GPI1 in the DSTDs, which does get used in some cases and ended up turning BUC6 on and off due to the wrong addresses, resulting in turning the entire device off (or causing it to reboot).
Removing the hole in the addresses fixes this, fixing one of my Bay Trail tablets turning off while booting the mainline kernel.
While at it add comments with the field names used in the DSDTs to make it easier to compare the register and bits used at each address with the datasheet.
Signed-off-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/acpi/pmic/intel_pmic_xpower.c | 50 +++++++++++++++++------------------ 1 file changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/acpi/pmic/intel_pmic_xpower.c b/drivers/acpi/pmic/intel_pmic_xpower.c index 6a082d4de12c..24a793957bc0 100644 --- a/drivers/acpi/pmic/intel_pmic_xpower.c +++ b/drivers/acpi/pmic/intel_pmic_xpower.c @@ -28,97 +28,97 @@ static struct pmic_table power_table[] = { .address = 0x00, .reg = 0x13, .bit = 0x05, - }, + }, /* ALD1 */ { .address = 0x04, .reg = 0x13, .bit = 0x06, - }, + }, /* ALD2 */ { .address = 0x08, .reg = 0x13, .bit = 0x07, - }, + }, /* ALD3 */ { .address = 0x0c, .reg = 0x12, .bit = 0x03, - }, + }, /* DLD1 */ { .address = 0x10, .reg = 0x12, .bit = 0x04, - }, + }, /* DLD2 */ { .address = 0x14, .reg = 0x12, .bit = 0x05, - }, + }, /* DLD3 */ { .address = 0x18, .reg = 0x12, .bit = 0x06, - }, + }, /* DLD4 */ { .address = 0x1c, .reg = 0x12, .bit = 0x00, - }, + }, /* ELD1 */ { .address = 0x20, .reg = 0x12, .bit = 0x01, - }, + }, /* ELD2 */ { .address = 0x24, .reg = 0x12, .bit = 0x02, - }, + }, /* ELD3 */ { .address = 0x28, .reg = 0x13, .bit = 0x02, - }, + }, /* FLD1 */ { .address = 0x2c, .reg = 0x13, .bit = 0x03, - }, + }, /* FLD2 */ { .address = 0x30, .reg = 0x13, .bit = 0x04, - }, + }, /* FLD3 */ { - .address = 0x38, + .address = 0x34, .reg = 0x10, .bit = 0x03, - }, + }, /* BUC1 */ { - .address = 0x3c, + .address = 0x38, .reg = 0x10, .bit = 0x06, - }, + }, /* BUC2 */ { - .address = 0x40, + .address = 0x3c, .reg = 0x10, .bit = 0x05, - }, + }, /* BUC3 */ { - .address = 0x44, + .address = 0x40, .reg = 0x10, .bit = 0x04, - }, + }, /* BUC4 */ { - .address = 0x48, + .address = 0x44, .reg = 0x10, .bit = 0x01, - }, + }, /* BUC5 */ { - .address = 0x4c, + .address = 0x48, .reg = 0x10, .bit = 0x00 - }, + }, /* BUC6 */ };
/* TMP0 - TMP5 are the same, all from GPADC */