There is a ACT8600 on the CI20 board and the bindings of the ACT8865 driver have changed without updating the CI20 device tree. Therefore the PMU can not be probed successfully and is running in power-on reset state.
Fix DT to match the latest act8865-regulator bindings.
Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes") Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller hns@goldelico.com Reviewed-by: Paul Cercueil paul@crapouillou.net --- arch/mips/boot/dts/ingenic/ci20.dts | 39 ++++++++++++++++++----------- 1 file changed, 24 insertions(+), 15 deletions(-)
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index 37b93166bf22..8b5fb635c66f 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -4,6 +4,7 @@ #include "jz4780.dtsi" #include <dt-bindings/clock/ingenic,tcu.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/active-semi,8865-regulator.h>
/ { compatible = "img,ci20", "ingenic,jz4780"; @@ -163,63 +164,71 @@
regulators { vddcore: SUDCDC1 { - regulator-name = "VDDCORE"; + regulator-name = "DCDC_REG1"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; vddmem: SUDCDC2 { - regulator-name = "VDDMEM"; + regulator-name = "DCDC_REG2"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-always-on; }; vcc_33: SUDCDC3 { - regulator-name = "VCC33"; + regulator-name = "DCDC_REG3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vcc_50: SUDCDC4 { - regulator-name = "VCC50"; + regulator-name = "SUDCDC_REG4"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; vcc_25: LDO_REG5 { - regulator-name = "VCC25"; + regulator-name = "LDO_REG5"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; wifi_io: LDO_REG6 { - regulator-name = "WIFIIO"; + regulator-name = "LDO_REG6"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; vcc_28: LDO_REG7 { - regulator-name = "VCC28"; + regulator-name = "LDO_REG7"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; vcc_15: LDO_REG8 { - regulator-name = "VCC15"; + regulator-name = "LDO_REG8"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-always-on; }; - vcc_18: LDO_REG9 { - regulator-name = "VCC18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + vrtc_18: LDO_REG9 { + regulator-name = "LDO_REG9"; + /* Despite the datasheet stating 3.3V + * for REG9 and the driver expecting that, + * REG9 outputs 1.8V. + * Likely the CI20 uses a proprietary + * factory programmed chip variant. + * Since this is a simple on/off LDO the + * exact values do not matter. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; vcc_11: LDO_REG10 { - regulator-name = "VCC11"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; + regulator-name = "LDO_REG10"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; }; };