From: Sean Wang sean.wang@mediatek.com
[ Upstream commit 66ca1a7b2d5503f561b751abdd6ec6fa96343eb6 ]
The command MCU_EXT_CMD_EDCA_UPDATE is not fully supported by the MT7921 firmware, so we apply CE command MCU_CE_CMD_SET_EDCA_PARAMS instead which is supported even in the oldest firmware to properly set up EDCA parameters for each AC.
Fixes: 1c099ab44727 ("mt76: mt7921: add MCU support") Signed-off-by: Sean Wang sean.wang@mediatek.com Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- .../wireless/mediatek/mt76/mt76_connac_mcu.h | 1 + .../net/wireless/mediatek/mt76/mt7921/mcu.c | 49 ++++++++----------- 2 files changed, 22 insertions(+), 28 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h index 265d64e3ca8c..93c783a3af7c 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h @@ -997,6 +997,7 @@ enum { MCU_CE_CMD_SET_BSS_ABORT = 0x17, MCU_CE_CMD_CANCEL_HW_SCAN = 0x1b, MCU_CE_CMD_SET_ROC = 0x1c, + MCU_CE_CMD_SET_EDCA_PARMS = 0x1d, MCU_CE_CMD_SET_P2P_OPPPS = 0x33, MCU_CE_CMD_SET_RATE_TX_POWER = 0x5d, MCU_CE_CMD_SCHED_SCAN_ENABLE = 0x61, diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c index ef1e1ef91611..152e7579f77d 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c @@ -920,33 +920,28 @@ EXPORT_SYMBOL_GPL(mt7921_mcu_exit);
int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif) { -#define WMM_AIFS_SET BIT(0) -#define WMM_CW_MIN_SET BIT(1) -#define WMM_CW_MAX_SET BIT(2) -#define WMM_TXOP_SET BIT(3) -#define WMM_PARAM_SET GENMASK(3, 0) -#define TX_CMD_MODE 1 + struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv; + struct edca { - u8 queue; - u8 set; - u8 aifs; - u8 cw_min; + __le16 cw_min; __le16 cw_max; __le16 txop; - }; + __le16 aifs; + u8 guardtime; + u8 acm; + } __packed; struct mt7921_mcu_tx { - u8 total; - u8 action; - u8 valid; - u8 mode; - struct edca edca[IEEE80211_NUM_ACS]; + u8 bss_idx; + u8 qos; + u8 wmm_idx; + u8 pad; } __packed req = { - .valid = true, - .mode = TX_CMD_MODE, - .total = IEEE80211_NUM_ACS, + .bss_idx = mvif->mt76.idx, + .qos = vif->bss_conf.qos, + .wmm_idx = mvif->mt76.wmm_idx, }; - struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv; + struct mu_edca { u8 cw_min; u8 cw_max; @@ -970,30 +965,29 @@ int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif) .qos = vif->bss_conf.qos, .wmm_idx = mvif->mt76.wmm_idx, }; + int to_aci[] = {1, 0, 2, 3}; int ac, ret;
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { struct ieee80211_tx_queue_params *q = &mvif->queue_params[ac]; - struct edca *e = &req.edca[ac]; + struct edca *e = &req.edca[to_aci[ac]];
- e->set = WMM_PARAM_SET; - e->queue = ac + mvif->mt76.wmm_idx * MT7921_MAX_WMM_SETS; e->aifs = q->aifs; e->txop = cpu_to_le16(q->txop);
if (q->cw_min) - e->cw_min = fls(q->cw_min); + e->cw_min = cpu_to_le16(q->cw_min); else e->cw_min = 5;
if (q->cw_max) - e->cw_max = cpu_to_le16(fls(q->cw_max)); + e->cw_max = cpu_to_le16(q->cw_max); else e->cw_max = cpu_to_le16(10); }
- ret = mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD(EDCA_UPDATE), - &req, sizeof(req), true); + ret = mt76_mcu_send_msg(&dev->mt76, MCU_CE_CMD(SET_EDCA_PARMS), &req, + sizeof(req), false); if (ret) return ret;
@@ -1003,7 +997,6 @@ int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif) for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { struct ieee80211_he_mu_edca_param_ac_rec *q; struct mu_edca *e; - int to_aci[] = {1, 0, 2, 3};
if (!mvif->queue_params[ac].mu_edca) break;