On 21/11/02 09:20PM, Christian Eggers wrote:
From: Stefan Riedmueller s.riedmueller@phytec.de
There is no need to explicitly set the default gpmi clock rate during boot for the i.MX 6 since this is done during nand_detect anyway.
Signed-off-by: Stefan Riedmueller s.riedmueller@phytec.de Cc: stable@vger.kernel.org
@stable: This patch fixes a bug because this (superfluous) call to clk_set_rate() misses the required clock gating. The resulting clock glitches can prevent the system from booting.
Changelog:
RFC --> v1
- Cc: stable@vger.kernel.org
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 9 --------- 1 file changed, 9 deletions(-)
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c index 4d08e4ab5c1b..a1f7000f033e 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c @@ -1034,15 +1034,6 @@ static int gpmi_get_clks(struct gpmi_nand_data *this) r->clock[i] = clk; }
- if (GPMI_IS_MX6(this))
/** Set the default value for the gpmi clock.** If you want to use the ONFI nand which is in the* Synchronous Mode, you should change the clock as you need.*/clk_set_rate(r->clock[0], 22000000);
Acked-by: Han Xu han.xu@nxp.com
return 0; err_clock: -- Christian Eggers Embedded software developer
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918 Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477 Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler