The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x dc78f7e59169d3f0e6c3c95d23dc8e55e95741e2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2025071258-wharf-revisit-b7a3@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From dc78f7e59169d3f0e6c3c95d23dc8e55e95741e2 Mon Sep 17 00:00:00 2001 From: Arun Raghavan arun@asymptotic.io Date: Thu, 26 Jun 2025 09:08:25 -0400 Subject: [PATCH] ASoC: fsl_sai: Force a software reset when starting in consumer mode
On an imx8mm platform with an external clock provider, when running the receiver (arecord) and triggering an xrun with xrun_injection, we see a channel swap/offset. This happens sometimes when running only the receiver, but occurs reliably if a transmitter (aplay) is also concurrently running.
It seems that the SAI loses track of frame sync during the trigger stop -> trigger start cycle that occurs during an xrun. Doing just a FIFO reset in this case does not suffice, and only a software reset seems to get it back on track.
This looks like the same h/w bug that is already handled for the producer case, so we now do the reset unconditionally on config disable.
Signed-off-by: Arun Raghavan arun@asymptotic.io Reported-by: Pieterjan Camerlynck p.camerlynck@televic.com Fixes: 3e3f8bd56955 ("ASoC: fsl_sai: fix no frame clk in master mode") Cc: stable@vger.kernel.org Reviewed-by: Fabio Estevam festevam@gmail.com Link: https://patch.msgid.link/20250626130858.163825-1-arun@arunraghavan.net Signed-off-by: Mark Brown broonie@kernel.org
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index af1a168d35e3..50af6b725670 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -803,13 +803,15 @@ static void fsl_sai_config_disable(struct fsl_sai *sai, int dir) * anymore. Add software reset to fix this issue. * This is a hardware bug, and will be fix in the * next sai version. + * + * In consumer mode, this can happen even after a + * single open/close, especially if both tx and rx + * are running concurrently. */ - if (!sai->is_consumer_mode[tx]) { - /* Software Reset */ - regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), FSL_SAI_CSR_SR); - /* Clear SR bit to finish the reset */ - regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), 0); - } + /* Software Reset */ + regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), FSL_SAI_CSR_SR); + /* Clear SR bit to finish the reset */ + regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), 0); }
static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,