5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Juergen Gross jgross@suse.com
commit afd30525a659ac0ae0904f0cb4a2ca75522c3123 upstream.
USERGS_SYSRET64 is used to return from a syscall via SYSRET, but a Xen PV guest will nevertheless use the IRET hypercall, as there is no sysret PV hypercall defined.
So instead of testing all the prerequisites for doing a sysret and then mangling the stack for Xen PV again for doing an iret just use the iret exit from the beginning.
This can easily be done via an ALTERNATIVE like it is done for the sysenter compat case already.
It should be noted that this drops the optimization in Xen for not restoring a few registers when returning to user mode, but it seems as if the saved instructions in the kernel more than compensate for this drop (a kernel build in a Xen PV guest was slightly faster with this patch applied).
While at it remove the stale sysret32 remnants.
[ pawan: Brad Spengler and Salvatore Bonaccorso carnil@debian.org reported a problem with the 5.10 backport commit edc702b4a820 ("x86/entry_64: Add VERW just before userspace transition").
When CONFIG_PARAVIRT_XXL=y, CLEAR_CPU_BUFFERS is not executed in syscall_return_via_sysret path as USERGS_SYSRET64 is runtime patched to:
.cpu_usergs_sysret64 = { 0x0f, 0x01, 0xf8, 0x48, 0x0f, 0x07 }, // swapgs; sysretq
which is missing CLEAR_CPU_BUFFERS. It turns out dropping USERGS_SYSRET64 simplifies the code, allowing CLEAR_CPU_BUFFERS to be explicitly added to syscall_return_via_sysret path. Below is with CONFIG_PARAVIRT_XXL=y and this patch applied:
syscall_return_via_sysret: ... <+342>: swapgs <+345>: xchg %ax,%ax <+347>: verw -0x1a2(%rip) <------ <+354>: sysretq ]
Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Borislav Petkov bp@suse.de Signed-off-by: Pawan Gupta pawan.kumar.gupta@linux.intel.com Link: https://lkml.kernel.org/r/20210120135555.32594-6-jgross@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/entry/entry_64.S | 17 ++++++++--------- arch/x86/include/asm/irqflags.h | 7 ------- arch/x86/include/asm/paravirt.h | 5 ----- arch/x86/include/asm/paravirt_types.h | 8 -------- arch/x86/kernel/asm-offsets_64.c | 2 -- arch/x86/kernel/paravirt.c | 5 +---- arch/x86/kernel/paravirt_patch.c | 4 ---- arch/x86/xen/enlighten_pv.c | 1 - arch/x86/xen/xen-asm.S | 21 --------------------- arch/x86/xen/xen-ops.h | 2 -- 10 files changed, 9 insertions(+), 63 deletions(-)
--- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -46,14 +46,6 @@ .code64 .section .entry.text, "ax"
-#ifdef CONFIG_PARAVIRT_XXL -SYM_CODE_START(native_usergs_sysret64) - UNWIND_HINT_EMPTY - swapgs - sysretq -SYM_CODE_END(native_usergs_sysret64) -#endif /* CONFIG_PARAVIRT_XXL */ - /* * 64-bit SYSCALL instruction entry. Up to 6 arguments in registers. * @@ -128,7 +120,12 @@ SYM_INNER_LABEL(entry_SYSCALL_64_after_h * Try to use SYSRET instead of IRET if we're returning to * a completely clean 64-bit userspace context. If we're not, * go to the slow exit path. + * In the Xen PV case we must use iret anyway. */ + + ALTERNATIVE "", "jmp swapgs_restore_regs_and_return_to_usermode", \ + X86_FEATURE_XENPV + movq RCX(%rsp), %rcx movq RIP(%rsp), %r11
@@ -220,7 +217,9 @@ syscall_return_via_sysret:
popq %rdi popq %rsp - USERGS_SYSRET64 + swapgs + CLEAR_CPU_BUFFERS + sysretq SYM_CODE_END(entry_SYSCALL_64)
/* --- a/arch/x86/include/asm/irqflags.h +++ b/arch/x86/include/asm/irqflags.h @@ -132,13 +132,6 @@ static __always_inline unsigned long arc #endif
#define INTERRUPT_RETURN jmp native_iret -#define USERGS_SYSRET64 \ - swapgs; \ - CLEAR_CPU_BUFFERS; \ - sysretq; -#define USERGS_SYSRET32 \ - swapgs; \ - sysretl
#else #define INTERRUPT_RETURN iret --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -776,11 +776,6 @@ extern void default_banner(void);
#ifdef CONFIG_X86_64 #ifdef CONFIG_PARAVIRT_XXL -#define USERGS_SYSRET64 \ - PARA_SITE(PARA_PATCH(PV_CPU_usergs_sysret64), \ - ANNOTATE_RETPOLINE_SAFE; \ - jmp PARA_INDIRECT(pv_ops+PV_CPU_usergs_sysret64);) - #ifdef CONFIG_DEBUG_ENTRY #define SAVE_FLAGS(clobbers) \ PARA_SITE(PARA_PATCH(PV_IRQ_save_fl), \ --- a/arch/x86/include/asm/paravirt_types.h +++ b/arch/x86/include/asm/paravirt_types.h @@ -157,14 +157,6 @@ struct pv_cpu_ops {
u64 (*read_pmc)(int counter);
- /* - * Switch to usermode gs and return to 64-bit usermode using - * sysret. Only used in 64-bit kernels to return to 64-bit - * processes. Usermode register state, including %rsp, must - * already be restored. - */ - void (*usergs_sysret64)(void); - /* Normal iret. Jump to this with the standard iret stack frame set up. */ void (*iret)(void); --- a/arch/x86/kernel/asm-offsets_64.c +++ b/arch/x86/kernel/asm-offsets_64.c @@ -13,8 +13,6 @@ int main(void) { #ifdef CONFIG_PARAVIRT #ifdef CONFIG_PARAVIRT_XXL - OFFSET(PV_CPU_usergs_sysret64, paravirt_patch_template, - cpu.usergs_sysret64); #ifdef CONFIG_DEBUG_ENTRY OFFSET(PV_IRQ_save_fl, paravirt_patch_template, irq.save_fl); #endif --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -124,8 +124,7 @@ unsigned paravirt_patch_default(u8 type, else if (opfunc == _paravirt_ident_64) ret = paravirt_patch_ident_64(insn_buff, len);
- else if (type == PARAVIRT_PATCH(cpu.iret) || - type == PARAVIRT_PATCH(cpu.usergs_sysret64)) + else if (type == PARAVIRT_PATCH(cpu.iret)) /* If operation requires a jmp, then jmp */ ret = paravirt_patch_jmp(insn_buff, opfunc, addr, len); #endif @@ -159,7 +158,6 @@ static u64 native_steal_clock(int cpu)
/* These are in entry.S */ extern void native_iret(void); -extern void native_usergs_sysret64(void);
static struct resource reserve_ioports = { .start = 0, @@ -299,7 +297,6 @@ struct paravirt_patch_template pv_ops =
.cpu.load_sp0 = native_load_sp0,
- .cpu.usergs_sysret64 = native_usergs_sysret64, .cpu.iret = native_iret,
#ifdef CONFIG_X86_IOPL_IOPERM --- a/arch/x86/kernel/paravirt_patch.c +++ b/arch/x86/kernel/paravirt_patch.c @@ -27,7 +27,6 @@ struct patch_xxl { const unsigned char mmu_write_cr3[3]; const unsigned char irq_restore_fl[2]; const unsigned char cpu_wbinvd[2]; - const unsigned char cpu_usergs_sysret64[6]; const unsigned char mov64[3]; };
@@ -40,8 +39,6 @@ static const struct patch_xxl patch_data .mmu_write_cr3 = { 0x0f, 0x22, 0xdf }, // mov %rdi, %cr3 .irq_restore_fl = { 0x57, 0x9d }, // push %rdi; popfq .cpu_wbinvd = { 0x0f, 0x09 }, // wbinvd - .cpu_usergs_sysret64 = { 0x0f, 0x01, 0xf8, - 0x48, 0x0f, 0x07 }, // swapgs; sysretq .mov64 = { 0x48, 0x89, 0xf8 }, // mov %rdi, %rax };
@@ -83,7 +80,6 @@ unsigned int native_patch(u8 type, void PATCH_CASE(mmu, read_cr3, xxl, insn_buff, len); PATCH_CASE(mmu, write_cr3, xxl, insn_buff, len);
- PATCH_CASE(cpu, usergs_sysret64, xxl, insn_buff, len); PATCH_CASE(cpu, wbinvd, xxl, insn_buff, len); #endif
--- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -1059,7 +1059,6 @@ static const struct pv_cpu_ops xen_cpu_o .read_pmc = xen_read_pmc,
.iret = xen_iret, - .usergs_sysret64 = xen_sysret64,
.load_tr_desc = paravirt_nop, .set_ldt = xen_set_ldt, --- a/arch/x86/xen/xen-asm.S +++ b/arch/x86/xen/xen-asm.S @@ -220,27 +220,6 @@ SYM_CODE_START(xen_iret) jmp hypercall_iret SYM_CODE_END(xen_iret)
-SYM_CODE_START(xen_sysret64) - UNWIND_HINT_EMPTY - /* - * We're already on the usermode stack at this point, but - * still with the kernel gs, so we can easily switch back. - * - * tss.sp2 is scratch space. - */ - movq %rsp, PER_CPU_VAR(cpu_tss_rw + TSS_sp2) - movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp - - pushq $__USER_DS - pushq PER_CPU_VAR(cpu_tss_rw + TSS_sp2) - pushq %r11 - pushq $__USER_CS - pushq %rcx - - pushq $VGCF_in_syscall - jmp hypercall_iret -SYM_CODE_END(xen_sysret64) - /* * XEN pv doesn't use trampoline stack, PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is * also the kernel stack. Reusing swapgs_restore_regs_and_return_to_usermode() --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -138,8 +138,6 @@ __visible unsigned long xen_read_cr2_dir
/* These are not functions, and cannot be called normally */ __visible void xen_iret(void); -__visible void xen_sysret32(void); -__visible void xen_sysret64(void);
extern int xen_panic_handler_init(void);