From: Stephan Gerhold stephan@gerhold.net
[ Upstream commit 3f8f770575d911c989043d8f0fb8dec96360c41c ]
MMS345L is another first generation touch screen from Melfas, which uses the same registers as MMS152.
However, using I2C_M_NOSTART for it causes errors when reading:
i2c i2c-0: sendbytes: NAK bailout. mms114 0-0048: __mms114_read_reg: i2c transfer failed (-5)
The driver works fine as soon as I2C_M_NOSTART is removed.
Reviewed-by: Andi Shyti andi@etezian.org Signed-off-by: Stephan Gerhold stephan@gerhold.net Link: https://lore.kernel.org/r/20200405170904.61512-1-stephan@gerhold.net [dtor: removed separate mms345l handling, made everyone use standard transfer mode, propagated the 10bit addressing flag to the read part of the transfer as well.] Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/touchscreen/mms114.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c index a5ab774da4cc..fca908ba4841 100644 --- a/drivers/input/touchscreen/mms114.c +++ b/drivers/input/touchscreen/mms114.c @@ -91,15 +91,15 @@ static int __mms114_read_reg(struct mms114_data *data, unsigned int reg, if (reg <= MMS114_MODE_CONTROL && reg + len > MMS114_MODE_CONTROL) BUG();
- /* Write register: use repeated start */ + /* Write register */ xfer[0].addr = client->addr; - xfer[0].flags = I2C_M_TEN | I2C_M_NOSTART; + xfer[0].flags = client->flags & I2C_M_TEN; xfer[0].len = 1; xfer[0].buf = &buf;
/* Read data */ xfer[1].addr = client->addr; - xfer[1].flags = I2C_M_RD; + xfer[1].flags = (client->flags & I2C_M_TEN) | I2C_M_RD; xfer[1].len = len; xfer[1].buf = val;
@@ -428,10 +428,8 @@ static int mms114_probe(struct i2c_client *client, const void *match_data; int error;
- if (!i2c_check_functionality(client->adapter, - I2C_FUNC_PROTOCOL_MANGLING)) { - dev_err(&client->dev, - "Need i2c bus that supports protocol mangling\n"); + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "Not supported I2C adapter\n"); return -ENODEV; }