xhci-hub.c tracks suspended ports in a suspended_port bitfield. This is checked when responding to a Get_Status(PORT) request to see if a port in running U0 state was recently resumed, and adds the required USB_PORT_STAT_C_SUSPEND change bit in those cases.
The suspended_port bit was left uncleared if a device is disconnected during suspend. The bit remained set even when a new device was connected and enumerated. The set bit resulted in a incorrect Get_Status(PORT) response with a bogus USB_PORT_STAT_C_SUSPEND change bit set once the new device reached U0 link state.
USB_PORT_STAT_C_SUSPEND change bit is only used for USB2 ports, but xhci-hub keeps track of both USB2 and USB3 suspended ports.
Cc: stable@vger.kernel.org Reported-by: Wesley Cheng quic_wcheng@quicinc.com Closes: https://lore.kernel.org/linux-usb/d68aa806-b26a-0e43-42fb-b8067325e967@quici... Fixes: 1d5810b6923c ("xhci: Rework port suspend structures for limited ports.") Tested-by: Wesley Cheng quic_wcheng@quicinc.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com --- drivers/usb/host/xhci-hub.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 0054d02239e2..0df5d807a77e 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1062,19 +1062,19 @@ static void xhci_get_usb3_port_status(struct xhci_port *port, u32 *status, *status |= USB_PORT_STAT_C_CONFIG_ERROR << 16;
/* USB3 specific wPortStatus bits */ - if (portsc & PORT_POWER) { + if (portsc & PORT_POWER) *status |= USB_SS_PORT_STAT_POWER; - /* link state handling */ - if (link_state == XDEV_U0) - bus_state->suspended_ports &= ~(1 << portnum); - }
- /* remote wake resume signaling complete */ - if (bus_state->port_remote_wakeup & (1 << portnum) && + /* no longer suspended or resuming */ + if (link_state != XDEV_U3 && link_state != XDEV_RESUME && link_state != XDEV_RECOVERY) { - bus_state->port_remote_wakeup &= ~(1 << portnum); - usb_hcd_end_port_resume(&hcd->self, portnum); + /* remote wake resume signaling complete */ + if (bus_state->port_remote_wakeup & (1 << portnum)) { + bus_state->port_remote_wakeup &= ~(1 << portnum); + usb_hcd_end_port_resume(&hcd->self, portnum); + } + bus_state->suspended_ports &= ~(1 << portnum); }
xhci_hub_report_usb3_link_state(xhci, status, portsc); @@ -1131,6 +1131,7 @@ static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status, usb_hcd_end_port_resume(&port->rhub->hcd->self, portnum); } port->rexit_active = 0; + bus_state->suspended_ports &= ~(1 << portnum); } }