[PATCH 3.16 06/72] fbdev: ssd1307fb: return proper error code if write command fails

3.16.79-rc1 review patch. If anyone has any objections, please let me know.

------------------

From: Prabhakar Lad prabhakar.csengg@gmail.com

commit 5b72ae9a901cbfbe632570f278486142b037fe51 upstream.

this patch fixes ssd1307fb_ssd1306_init() function to return proper error codes in case of failures.

Signed-off-by: Lad, Prabhakar prabhakar.csengg@gmail.com Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com Signed-off-by: Ben Hutchings ben@decadent.org.uk --- drivers/video/fbdev/ssd1307fb.c | 67 ++++++++++++++++++++++++++------- 1 file changed, 53 insertions(+), 14 deletions(-)

--- a/drivers/video/fbdev/ssd1307fb.c +++ b/drivers/video/fbdev/ssd1307fb.c @@ -320,7 +320,10 @@ static int ssd1307fb_ssd1306_init(struct

/* Set initial contrast */ ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST); - ret = ret & ssd1307fb_write_cmd(par->client, 0x7f); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, 0x7f); if (ret < 0) return ret;

@@ -336,63 +339,99 @@ static int ssd1307fb_ssd1306_init(struct

/* Set multiplex ratio value */ ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_MULTIPLEX_RATIO); - ret = ret & ssd1307fb_write_cmd(par->client, par->height - 1); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, par->height - 1); if (ret < 0) return ret;

/* set display offset value */ ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_DISPLAY_OFFSET); + if (ret < 0) + return ret; + ret = ssd1307fb_write_cmd(par->client, 0x20); if (ret < 0) return ret;

/* Set clock frequency */ ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_CLOCK_FREQ); - ret = ret & ssd1307fb_write_cmd(par->client, 0xf0); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, 0xf0); if (ret < 0) return ret;

/* Set precharge period in number of ticks from the internal clock */ ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PRECHARGE_PERIOD); - ret = ret & ssd1307fb_write_cmd(par->client, 0x22); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, 0x22); if (ret < 0) return ret;

/* Set COM pins configuration */ ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COM_PINS_CONFIG); - ret = ret & ssd1307fb_write_cmd(par->client, 0x22); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, 0x22); if (ret < 0) return ret;

/* Set VCOMH */ ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_VCOMH); - ret = ret & ssd1307fb_write_cmd(par->client, 0x49); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, 0x49); if (ret < 0) return ret;

/* Turn on the DC-DC Charge Pump */ ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP); - ret = ret & ssd1307fb_write_cmd(par->client, 0x14); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, 0x14); if (ret < 0) return ret;

/* Switch to horizontal addressing mode */ ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_ADDRESS_MODE); - ret = ret & ssd1307fb_write_cmd(par->client, - SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, + SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL); if (ret < 0) return ret;

ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE); - ret = ret & ssd1307fb_write_cmd(par->client, 0x0); - ret = ret & ssd1307fb_write_cmd(par->client, par->width - 1); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, 0x0); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, par->width - 1); if (ret < 0) return ret;

ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE); - ret = ret & ssd1307fb_write_cmd(par->client, 0x0); - ret = ret & ssd1307fb_write_cmd(par->client, - par->page_offset + (par->height / 8) - 1); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, 0x0); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, + par->page_offset + (par->height / 8) - 1); if (ret < 0) return ret;