This is a note to let you know that I've just added the patch titled
ALSA: hda: Add a power_save blacklist
to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git%3Ba=su...
The filename of the patch is: alsa-hda-add-a-power_save-blacklist.patch and it can be found in the queue-4.15 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let stable@vger.kernel.org know about it.
From 1ba8f9d308174e647b864c36209b4d7934d99888 Mon Sep 17 00:00:00 2001
From: Hans de Goede hdegoede@redhat.com Date: Thu, 22 Feb 2018 14:20:35 +0100 Subject: ALSA: hda: Add a power_save blacklist
From: Hans de Goede hdegoede@redhat.com
commit 1ba8f9d308174e647b864c36209b4d7934d99888 upstream.
On some boards setting power_save to a non 0 value leads to clicking / popping sounds when ever we enter/leave powersaving mode. Ideally we would figure out how to avoid these sounds, but that is not always feasible.
This commit adds a blacklist for devices where powersaving is known to cause problems and disables it on these devices.
Note I tried to put this blacklist in userspace first: https://github.com/systemd/systemd/pull/8128
But the systemd maintainers rightfully pointed out that it would be impossible to then later remove entries once we actually find a way to make power-saving work on listed boards without issues. Having this list in the kernel will allow removal of the blacklist entry in the same commit which fixes the clicks / plops.
The blacklist only applies to the default power_save module-option value, if a user explicitly sets the module-option then the blacklist is not used.
[ added an ifdef CONFIG_PM for the build error -- tiwai]
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198611 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- sound/pci/hda/hda_intel.c | 38 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 36 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -181,7 +181,7 @@ static const struct kernel_param_ops par }; #define param_check_xint param_check_int
-static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; +static int power_save = -1; module_param(power_save, xint, 0644); MODULE_PARM_DESC(power_save, "Automatic power-saving timeout " "(in second, 0 = disable)."); @@ -2186,6 +2186,24 @@ out_free: return err; }
+#ifdef CONFIG_PM +/* On some boards setting power_save to a non 0 value leads to clicking / + * popping sounds when ever we enter/leave powersaving mode. Ideally we would + * figure out how to avoid these sounds, but that is not always feasible. + * So we keep a list of devices where we disable powersaving as its known + * to causes problems on these devices. + */ +static struct snd_pci_quirk power_save_blacklist[] = { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1849, 0x0c0c, "Asrock B85M-ITX", 0), + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1043, 0x8733, "Asus Prime X370-Pro", 0), + /* https://bugzilla.kernel.org/show_bug.cgi?id=198611 */ + SND_PCI_QUIRK(0x17aa, 0x2227, "Lenovo X1 Carbon 3rd Gen", 0), + {} +}; +#endif /* CONFIG_PM */ + /* number of codec slots for each chipset: 0 = default slots (i.e. 4) */ static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = { [AZX_DRIVER_NVIDIA] = 8, @@ -2198,6 +2216,7 @@ static int azx_probe_continue(struct azx struct hdac_bus *bus = azx_bus(chip); struct pci_dev *pci = chip->pci; int dev = chip->dev_index; + int val; int err;
hda->probe_continued = 1; @@ -2278,7 +2297,22 @@ static int azx_probe_continue(struct azx
chip->running = 1; azx_add_card_list(chip); - snd_hda_set_power_save(&chip->bus, power_save * 1000); + + val = power_save; +#ifdef CONFIG_PM + if (val == -1) { + const struct snd_pci_quirk *q; + + val = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; + q = snd_pci_quirk_lookup(chip->pci, power_save_blacklist); + if (q && val) { + dev_info(chip->card->dev, "device %04x:%04x is on the power_save blacklist, forcing power_save to 0\n", + q->subvendor, q->subdevice); + val = 0; + } + } +#endif /* CONFIG_PM */ + snd_hda_set_power_save(&chip->bus, val * 1000); if (azx_has_pm_runtime(chip) || hda->use_vga_switcheroo) pm_runtime_put_autosuspend(&pci->dev);
Patches currently in stable-queue which might be from hdegoede@redhat.com are
queue-4.15/alsa-hda-add-a-power_save-blacklist.patch queue-4.15/bluetooth-btusb-use-dmi-matching-for-qca-reset_resume-quirking.patch