From: Sebastian Basierski sebastianx.basierski@intel.com
[ Upstream commit 67d47b95119ad589b0a0b16b88b1dd9a04061ced ]
While using i219-LM card currently it was only possible to achieve about 60% of maximum speed due to regression introduced in Linux 5.8. This was caused by TSO not being disabled by default despite commit f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround"). Fix that by disabling TSO during driver probe.
Fixes: f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround") Signed-off-by: Sebastian Basierski sebastianx.basierski@intel.com Signed-off-by: Mateusz Palczewski mateusz.palczewski@intel.com Tested-by: Naama Meir naamax.meir@linux.intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Reviewed-by: Simon Horman simon.horman@corigine.com Link: https://lore.kernel.org/r/20230417205345.1030801-1-anthony.l.nguyen@intel.co... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/e1000e/netdev.c | 51 +++++++++++----------- 1 file changed, 26 insertions(+), 25 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 7e41ce188cc6a..6b7d162af3e5e 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5298,31 +5298,6 @@ static void e1000_watchdog_task(struct work_struct *work) ew32(TARC(0), tarc0); }
- /* disable TSO for pcie and 10/100 speeds, to avoid - * some hardware issues - */ - if (!(adapter->flags & FLAG_TSO_FORCE)) { - switch (adapter->link_speed) { - case SPEED_10: - case SPEED_100: - e_info("10/100 speed: disabling TSO\n"); - netdev->features &= ~NETIF_F_TSO; - netdev->features &= ~NETIF_F_TSO6; - break; - case SPEED_1000: - netdev->features |= NETIF_F_TSO; - netdev->features |= NETIF_F_TSO6; - break; - default: - /* oops */ - break; - } - if (hw->mac.type == e1000_pch_spt) { - netdev->features &= ~NETIF_F_TSO; - netdev->features &= ~NETIF_F_TSO6; - } - } - /* enable transmits in the hardware, need to do this * after setting TARC(0) */ @@ -7543,6 +7518,32 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) NETIF_F_RXCSUM | NETIF_F_HW_CSUM);
+ /* disable TSO for pcie and 10/100 speeds to avoid + * some hardware issues and for i219 to fix transfer + * speed being capped at 60% + */ + if (!(adapter->flags & FLAG_TSO_FORCE)) { + switch (adapter->link_speed) { + case SPEED_10: + case SPEED_100: + e_info("10/100 speed: disabling TSO\n"); + netdev->features &= ~NETIF_F_TSO; + netdev->features &= ~NETIF_F_TSO6; + break; + case SPEED_1000: + netdev->features |= NETIF_F_TSO; + netdev->features |= NETIF_F_TSO6; + break; + default: + /* oops */ + break; + } + if (hw->mac.type == e1000_pch_spt) { + netdev->features &= ~NETIF_F_TSO; + netdev->features &= ~NETIF_F_TSO6; + } + } + /* Set user-changeable features (subset of all device features) */ netdev->hw_features = netdev->features; netdev->hw_features |= NETIF_F_RXFCS;