6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vladimir Oltean vladimir.oltean@nxp.com
[ Upstream commit acfcdb78d5d4cdb78e975210c8825b9a112463f6 ]
With this port schedule:
tc qdisc replace dev $send_if parent root handle 100 taprio \ num_tc 8 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ map 0 1 2 3 4 5 6 7 \ base-time 0 cycle-time 10000 \ sched-entry S 01 1250 \ sched-entry S 02 1250 \ sched-entry S 04 1250 \ sched-entry S 08 1250 \ sched-entry S 10 1250 \ sched-entry S 20 1250 \ sched-entry S 40 1250 \ sched-entry S 80 1250 \ flags 2
ptp4l would fail to take TX timestamps of Pdelay_Resp messages like this:
increasing tx_timestamp_timeout may correct this issue, but it is likely caused by a driver bug ptp4l[4134.168]: port 2: send peer delay response failed
It turns out that the driver can't take their TX timestamps because it can't transmit them in the first place. And there's nothing special about the Pdelay_Resp packets - they're just regular 68 byte packets. But with this taprio configuration, the switch would refuse to send even the ETH_ZLEN minimum packet size.
This should have definitely not been the case. When applying the taprio config, the driver prints:
mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS
and thus, everything under 132 bytes - ETH_FCS_LEN should have been sent without problems. Yet it's not.
For the forwarding path, the configuration is fine, yet packets injected from Linux get stuck with this schedule no matter what.
The first hint that the static guard bands are the cause of the problem is that reverting Michael Walle's commit 297c4de6f780 ("net: dsa: felix: re-enable TAS guard band mode") made things work. It must be that the guard bands are calculated incorrectly.
I remembered that there is a magic constant in the driver, set to 33 ns for no logical reason other than experimentation, which says "never let the static guard bands get so large as to leave less than this amount of remaining space in the time slot, because the queue system will refuse to schedule packets otherwise, and they will get stuck". I had a hunch that my previous experimentally-determined value was only good for packets coming from the forwarding path, and that the CPU injection path needed more.
I came to the new value of 35 ns through binary search, after seeing that with 544 ns (the bit time required to send the Pdelay_Resp packet at gigabit) it works. Again, this is purely experimental, there's no logic and the manual doesn't say anything.
The new driver prints for this schedule look like this:
mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS
So yes, the maximum MTU is now even smaller by 1 byte than before. This is maybe counter-intuitive, but makes more sense with a diagram of one time slot.
Before:
Gate open Gate close | | v 1250 ns total time slot duration v <----------------------------------------------------> <----><----------------------------------------------> 33 ns 1217 ns static guard band useful
Gate open Gate close | | v 1250 ns total time slot duration v <----------------------------------------------------> <-----><---------------------------------------------> 35 ns 1215 ns static guard band useful
The static guard band implemented by this switch hardware directly determines the maximum allowable MTU for that traffic class. The larger it is, the earlier the switch will stop scheduling frames for transmission, because otherwise they might overrun the gate close time (and avoiding that is the entire purpose of Michael's patch). So, we now have guard bands smaller by 2 ns, thus, in this particular case, we lose a byte of the maximum MTU.
Fixes: 11afdc6526de ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet") Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com Reviewed-by: Michael Walle mwalle@kernel.org Link: https://patch.msgid.link/20241210132640.3426788-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/dsa/ocelot/felix_vsc9959.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c index 0186482194d2..391c4e3cb66f 100644 --- a/drivers/net/dsa/ocelot/felix_vsc9959.c +++ b/drivers/net/dsa/ocelot/felix_vsc9959.c @@ -22,7 +22,7 @@ #define VSC9959_NUM_PORTS 6
#define VSC9959_TAS_GCL_ENTRY_MAX 63 -#define VSC9959_TAS_MIN_GATE_LEN_NS 33 +#define VSC9959_TAS_MIN_GATE_LEN_NS 35 #define VSC9959_VCAP_POLICER_BASE 63 #define VSC9959_VCAP_POLICER_MAX 383 #define VSC9959_SWITCH_PCI_BAR 4 @@ -1057,11 +1057,15 @@ static void vsc9959_mdio_bus_free(struct ocelot *ocelot) mdiobus_free(felix->imdio); }
-/* The switch considers any frame (regardless of size) as eligible for - * transmission if the traffic class gate is open for at least 33 ns. +/* The switch considers any frame (regardless of size) as eligible + * for transmission if the traffic class gate is open for at least + * VSC9959_TAS_MIN_GATE_LEN_NS. + * * Overruns are prevented by cropping an interval at the end of the gate time - * slot for which egress scheduling is blocked, but we need to still keep 33 ns - * available for one packet to be transmitted, otherwise the port tc will hang. + * slot for which egress scheduling is blocked, but we need to still keep + * VSC9959_TAS_MIN_GATE_LEN_NS available for one packet to be transmitted, + * otherwise the port tc will hang. + * * This function returns the size of a gate interval that remains available for * setting the guard band, after reserving the space for one egress frame. */ @@ -1293,7 +1297,8 @@ static void vsc9959_tas_guard_bands_update(struct ocelot *ocelot, int port) * per-tc static guard band lengths, so it reduces the * useful gate interval length. Therefore, be careful * to calculate a guard band (and therefore max_sdu) - * that still leaves 33 ns available in the time slot. + * that still leaves VSC9959_TAS_MIN_GATE_LEN_NS + * available in the time slot. */ max_sdu = div_u64(remaining_gate_len_ps, picos_per_byte); /* A TC gate may be completely closed, which is a