6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maud Spierings maudspierings@gocontroll.com
commit 9f92e93e257b33e73622640a9205f8642ec16ddd upstream.
Throughout the various probe functions &indio_dev->dev is used before it is initialized. This caused a kernel panic in st_sensors_power_enable() when the call to devm_regulator_bulk_get_enable() fails and then calls dev_err_probe() with the uninitialized device.
This seems to only cause a panic with dev_err_probe(), dev_err(), dev_warn() and dev_info() don't seem to cause a panic, but are fixed as well.
The issue is reported and traced here: [1]
Link: https://lore.kernel.org/all/AM7P189MB100986A83D2F28AF3FFAF976E39EA@AM7P189MB... [1] Cc: stable@vger.kernel.org Signed-off-by: Maud Spierings maudspierings@gocontroll.com Reviewed-by: Andy Shevchenko andy@kernel.org Link: https://... [1] Link: https://patch.msgid.link/20250527-st_iio_fix-v4-1-12d89801c761@gocontroll.co... Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/accel/st_accel_core.c | 10 ++--- drivers/iio/common/st_sensors/st_sensors_core.c | 36 +++++++++------------ drivers/iio/common/st_sensors/st_sensors_trigger.c | 20 +++++------ 3 files changed, 31 insertions(+), 35 deletions(-)
--- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -1353,6 +1353,7 @@ static int apply_acpi_orientation(struct union acpi_object *ont; union acpi_object *elements; acpi_status status; + struct device *parent = indio_dev->dev.parent; int ret = -EINVAL; unsigned int val; int i, j; @@ -1371,7 +1372,7 @@ static int apply_acpi_orientation(struct };
- adev = ACPI_COMPANION(indio_dev->dev.parent); + adev = ACPI_COMPANION(parent); if (!adev) return -ENXIO;
@@ -1380,8 +1381,7 @@ static int apply_acpi_orientation(struct if (status == AE_NOT_FOUND) { return -ENXIO; } else if (ACPI_FAILURE(status)) { - dev_warn(&indio_dev->dev, "failed to execute _ONT: %d\n", - status); + dev_warn(parent, "failed to execute _ONT: %d\n", status); return status; }
@@ -1457,12 +1457,12 @@ static int apply_acpi_orientation(struct }
ret = 0; - dev_info(&indio_dev->dev, "computed mount matrix from ACPI\n"); + dev_info(parent, "computed mount matrix from ACPI\n");
out: kfree(buffer.pointer); if (ret) - dev_dbg(&indio_dev->dev, + dev_dbg(parent, "failed to apply ACPI orientation data: %d\n", ret);
return ret; --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -154,7 +154,7 @@ static int st_sensors_set_fullscale(stru return err;
st_accel_set_fullscale_error: - dev_err(&indio_dev->dev, "failed to set new fullscale.\n"); + dev_err(indio_dev->dev.parent, "failed to set new fullscale.\n"); return err; }
@@ -231,8 +231,7 @@ int st_sensors_power_enable(struct iio_d ARRAY_SIZE(regulator_names), regulator_names); if (err) - return dev_err_probe(&indio_dev->dev, err, - "unable to enable supplies\n"); + return dev_err_probe(parent, err, "unable to enable supplies\n");
return 0; } @@ -241,13 +240,14 @@ EXPORT_SYMBOL_NS(st_sensors_power_enable static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev, struct st_sensors_platform_data *pdata) { + struct device *parent = indio_dev->dev.parent; struct st_sensor_data *sdata = iio_priv(indio_dev);
/* Sensor does not support interrupts */ if (!sdata->sensor_settings->drdy_irq.int1.addr && !sdata->sensor_settings->drdy_irq.int2.addr) { if (pdata->drdy_int_pin) - dev_info(&indio_dev->dev, + dev_info(parent, "DRDY on pin INT%d specified, but sensor does not support interrupts\n", pdata->drdy_int_pin); return 0; @@ -256,29 +256,27 @@ static int st_sensors_set_drdy_int_pin(s switch (pdata->drdy_int_pin) { case 1: if (!sdata->sensor_settings->drdy_irq.int1.mask) { - dev_err(&indio_dev->dev, - "DRDY on INT1 not available.\n"); + dev_err(parent, "DRDY on INT1 not available.\n"); return -EINVAL; } sdata->drdy_int_pin = 1; break; case 2: if (!sdata->sensor_settings->drdy_irq.int2.mask) { - dev_err(&indio_dev->dev, - "DRDY on INT2 not available.\n"); + dev_err(parent, "DRDY on INT2 not available.\n"); return -EINVAL; } sdata->drdy_int_pin = 2; break; default: - dev_err(&indio_dev->dev, "DRDY on pdata not valid.\n"); + dev_err(parent, "DRDY on pdata not valid.\n"); return -EINVAL; }
if (pdata->open_drain) { if (!sdata->sensor_settings->drdy_irq.int1.addr_od && !sdata->sensor_settings->drdy_irq.int2.addr_od) - dev_err(&indio_dev->dev, + dev_err(parent, "open drain requested but unsupported.\n"); else sdata->int_pin_open_drain = true; @@ -336,6 +334,7 @@ EXPORT_SYMBOL_NS(st_sensors_dev_name_pro int st_sensors_init_sensor(struct iio_dev *indio_dev, struct st_sensors_platform_data *pdata) { + struct device *parent = indio_dev->dev.parent; struct st_sensor_data *sdata = iio_priv(indio_dev); struct st_sensors_platform_data *of_pdata; int err = 0; @@ -343,7 +342,7 @@ int st_sensors_init_sensor(struct iio_de mutex_init(&sdata->odr_lock);
/* If OF/DT pdata exists, it will take precedence of anything else */ - of_pdata = st_sensors_dev_probe(indio_dev->dev.parent, pdata); + of_pdata = st_sensors_dev_probe(parent, pdata); if (IS_ERR(of_pdata)) return PTR_ERR(of_pdata); if (of_pdata) @@ -370,7 +369,7 @@ int st_sensors_init_sensor(struct iio_de if (err < 0) return err; } else - dev_info(&indio_dev->dev, "Full-scale not possible\n"); + dev_info(parent, "Full-scale not possible\n");
err = st_sensors_set_odr(indio_dev, sdata->odr); if (err < 0) @@ -405,7 +404,7 @@ int st_sensors_init_sensor(struct iio_de mask = sdata->sensor_settings->drdy_irq.int2.mask_od; }
- dev_info(&indio_dev->dev, + dev_info(parent, "set interrupt line to open drain mode on pin %d\n", sdata->drdy_int_pin); err = st_sensors_write_data_with_mask(indio_dev, addr, @@ -594,21 +593,20 @@ EXPORT_SYMBOL_NS(st_sensors_get_settings int st_sensors_verify_id(struct iio_dev *indio_dev) { struct st_sensor_data *sdata = iio_priv(indio_dev); + struct device *parent = indio_dev->dev.parent; int wai, err;
if (sdata->sensor_settings->wai_addr) { err = regmap_read(sdata->regmap, sdata->sensor_settings->wai_addr, &wai); if (err < 0) { - dev_err(&indio_dev->dev, - "failed to read Who-Am-I register.\n"); - return err; + return dev_err_probe(parent, err, + "failed to read Who-Am-I register.\n"); }
if (sdata->sensor_settings->wai != wai) { - dev_warn(&indio_dev->dev, - "%s: WhoAmI mismatch (0x%x).\n", - indio_dev->name, wai); + dev_warn(parent, "%s: WhoAmI mismatch (0x%x).\n", + indio_dev->name, wai); } }
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -127,7 +127,7 @@ int st_sensors_allocate_trigger(struct i sdata->trig = devm_iio_trigger_alloc(parent, "%s-trigger", indio_dev->name); if (sdata->trig == NULL) { - dev_err(&indio_dev->dev, "failed to allocate iio trigger.\n"); + dev_err(parent, "failed to allocate iio trigger.\n"); return -ENOMEM; }
@@ -143,7 +143,7 @@ int st_sensors_allocate_trigger(struct i case IRQF_TRIGGER_FALLING: case IRQF_TRIGGER_LOW: if (!sdata->sensor_settings->drdy_irq.addr_ihl) { - dev_err(&indio_dev->dev, + dev_err(parent, "falling/low specified for IRQ but hardware supports only rising/high: will request rising/high\n"); if (irq_trig == IRQF_TRIGGER_FALLING) irq_trig = IRQF_TRIGGER_RISING; @@ -156,21 +156,19 @@ int st_sensors_allocate_trigger(struct i sdata->sensor_settings->drdy_irq.mask_ihl, 1); if (err < 0) return err; - dev_info(&indio_dev->dev, + dev_info(parent, "interrupts on the falling edge or active low level\n"); } break; case IRQF_TRIGGER_RISING: - dev_info(&indio_dev->dev, - "interrupts on the rising edge\n"); + dev_info(parent, "interrupts on the rising edge\n"); break; case IRQF_TRIGGER_HIGH: - dev_info(&indio_dev->dev, - "interrupts active high level\n"); + dev_info(parent, "interrupts active high level\n"); break; default: /* This is the most preferred mode, if possible */ - dev_err(&indio_dev->dev, + dev_err(parent, "unsupported IRQ trigger specified (%lx), enforce rising edge\n", irq_trig); irq_trig = IRQF_TRIGGER_RISING; } @@ -179,7 +177,7 @@ int st_sensors_allocate_trigger(struct i if (irq_trig == IRQF_TRIGGER_FALLING || irq_trig == IRQF_TRIGGER_RISING) { if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr) { - dev_err(&indio_dev->dev, + dev_err(parent, "edge IRQ not supported w/o stat register.\n"); return -EOPNOTSUPP; } @@ -214,13 +212,13 @@ int st_sensors_allocate_trigger(struct i sdata->trig->name, sdata->trig); if (err) { - dev_err(&indio_dev->dev, "failed to request trigger IRQ.\n"); + dev_err(parent, "failed to request trigger IRQ.\n"); return err; }
err = devm_iio_trigger_register(parent, sdata->trig); if (err < 0) { - dev_err(&indio_dev->dev, "failed to register iio trigger.\n"); + dev_err(parent, "failed to register iio trigger.\n"); return err; } indio_dev->trig = iio_trigger_get(sdata->trig);