From: Amit Kucheria amit.kucheria@linaro.org
[ Upstream commit fe2aff0c574d206f34f1864d5a0b093694c27142 ]
The thermal trip points have unit name but no reg property, so we can remove them. It also fixes the following warnings from 'make dtbs_check' after adding the thermal yaml bindings.
arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones: gpu-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones: camera-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones: modem-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones: gpu-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones: camera-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones: modem-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\-_]{0,63}$', 'pinctrl-[0-9]+'
Signed-off-by: Amit Kucheria amit.kucheria@linaro.org Link: https://lore.kernel.org/r/2d3d045c18a2fb85b28cf304aa11ae6e6538d75e.158556245... Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index a88a15f2352b..5548d7b5096c 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -261,7 +261,7 @@ cpu2_3-thermal { thermal-sensors = <&tsens 4>;
trips { - cpu2_3_alert0: trip-point@0 { + cpu2_3_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; @@ -291,7 +291,7 @@ gpu-thermal { thermal-sensors = <&tsens 2>;
trips { - gpu_alert0: trip-point@0 { + gpu_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; @@ -311,7 +311,7 @@ camera-thermal { thermal-sensors = <&tsens 1>;
trips { - cam_alert0: trip-point@0 { + cam_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "hot"; @@ -326,7 +326,7 @@ modem-thermal { thermal-sensors = <&tsens 0>;
trips { - modem_alert0: trip-point@0 { + modem_alert0: trip-point0 { temperature = <85000>; hysteresis = <2000>; type = "hot";