From: Sanket Parmar sparmar@cadence.com
commit d6eef886903c4bb5af41b9a31d4ba11dc7a6f8e8 upstream.
ZLP gets stuck if TDL_CHK bit is set and TDL_FROM_TRB is used as TDL source for IN endpoints. To fix it, TDL_CHK is only enabled for OUT endpoints.
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reported-by: Aswath Govindraju a-govindraju@ti.com Signed-off-by: Sanket Parmar sparmar@cadence.com Link: https://lore.kernel.org/r/1621263912-13175-1-git-send-email-sparmar@cadence.... Signed-off-by: Peter Chen peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/cdns3/gadget.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
--- a/drivers/usb/cdns3/gadget.c +++ b/drivers/usb/cdns3/gadget.c @@ -2006,7 +2006,7 @@ static void cdns3_configure_dmult(struct else mask = BIT(priv_ep->num);
- if (priv_ep->type != USB_ENDPOINT_XFER_ISOC) { + if (priv_ep->type != USB_ENDPOINT_XFER_ISOC && !priv_ep->dir) { cdns3_set_register_bit(®s->tdl_from_trb, mask); cdns3_set_register_bit(®s->tdl_beh, mask); cdns3_set_register_bit(®s->tdl_beh2, mask); @@ -2045,15 +2045,13 @@ int cdns3_ep_config(struct cdns3_endpoin case USB_ENDPOINT_XFER_INT: ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_INT);
- if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) || - priv_dev->dev_ver > DEV_VER_V2) + if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir) ep_cfg |= EP_CFG_TDL_CHK; break; case USB_ENDPOINT_XFER_BULK: ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_BULK);
- if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) || - priv_dev->dev_ver > DEV_VER_V2) + if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir) ep_cfg |= EP_CFG_TDL_CHK; break; default: