On Wed, Feb 19, 2025 at 4:32 AM Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
6.1-stable review patch. If anyone has any objections, please let me know.
Looks good to me
From: Tomi Valkeinen tomi.valkeinen@ideasonboard.com
commit 44b6730ab53ef04944fbaf6da0e77397531517b7 upstream.
It has been observed that sometimes DSS will trigger an interrupt and the top level interrupt (DISPC_IRQSTATUS) is not zero, but the VP and VID level interrupt-statuses are zero.
As the top level irqstatus is supposed to tell whether we have VP/VID interrupts, the thinking of the driver authors was that this particular case could never happen. Thus the driver only clears the DISPC_IRQSTATUS bits which has corresponding interrupts in VP/VID status. So when this issue happens, the driver will not clear DISPC_IRQSTATUS, and we get an interrupt flood.
It is unclear why the issue happens. It could be a race issue in the driver, but no such race has been found. It could also be an issue with the HW. However a similar case can be easily triggered by manually writing to DISPC_IRQSTATUS_RAW. This will forcibly set a bit in the DISPC_IRQSTATUS and trigger an interrupt, and as the driver never clears the bit, we get an interrupt flood.
To fix the issue, always clear DISPC_IRQSTATUS. The concern with this solution is that if the top level irqstatus is the one that triggers the interrupt, always clearing DISPC_IRQSTATUS might leave some interrupts unhandled if VP/VID interrupt statuses have bits set. However, testing shows that if any of the irqstatuses is set (i.e. even if DISPC_IRQSTATUS == 0, but a VID irqstatus has a bit set), we will get an interrupt.
Co-developed-by: Bin Liu b-liu@ti.com Signed-off-by: Bin Liu b-liu@ti.com Co-developed-by: Devarsh Thakkar devarsht@ti.com Signed-off-by: Devarsh Thakkar devarsht@ti.com Co-developed-by: Jonathan Cormier jcormier@criticallink.com Signed-off-by: Jonathan Cormier jcormier@criticallink.com Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Cc: stable@vger.kernel.org Tested-by: Jonathan Cormier jcormier@criticallink.com Reviewed-by: Aradhya Bhatia aradhya.bhatia@linux.dev Signed-off-by: Tomi Valkeinen tomi.valkeinen@ideasonboard.com Link: https://patchwork.freedesktop.org/patch/msgid/20241021-tidss-irq-fix-v1-1-82... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
drivers/gpu/drm/tidss/tidss_dispc.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-)
--- a/drivers/gpu/drm/tidss/tidss_dispc.c +++ b/drivers/gpu/drm/tidss/tidss_dispc.c @@ -679,24 +679,20 @@ static void dispc_k3_clear_irqstatus(struct dispc_device *dispc, dispc_irq_t clearmask) { unsigned int i;
u32 top_clear = 0; for (i = 0; i < dispc->feat->num_vps; ++i) {if (clearmask & DSS_IRQ_VP_MASK(i)) {
if (clearmask & DSS_IRQ_VP_MASK(i)) dispc_k3_vp_write_irqstatus(dispc, i, clearmask);
top_clear |= BIT(i);} } for (i = 0; i < dispc->feat->num_planes; ++i) {if (clearmask & DSS_IRQ_PLANE_MASK(i)) {
if (clearmask & DSS_IRQ_PLANE_MASK(i)) dispc_k3_vid_write_irqstatus(dispc, i, clearmask);
top_clear |= BIT(4 + i);} } if (dispc->feat->subrev == DISPC_K2G) return;dispc_write(dispc, DISPC_IRQSTATUS, top_clear);
/* always clear the top level irqstatus */dispc_write(dispc, DISPC_IRQSTATUS, dispc_read(dispc, DISPC_IRQSTATUS)); /* Flush posted writes */ dispc_read(dispc, DISPC_IRQSTATUS);