6.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vladimir Oltean vladimir.oltean@nxp.com
[ Upstream commit 8e982441ba601d982dd0739972115d85ae01d99b ]
The control flow in rtl8211f_config_init() has some pitfalls which were probably unintended. Specifically it has an early return:
switch (phydev->interface) { ... default: /* the rest of the modes imply leaving delay as is. */ return 0; }
which exits the entire config_init() function. This means it also skips doing things such as disabling CLKOUT or disabling PHY-mode EEE.
For the RTL8211FS, which uses PHY_INTERFACE_MODE_SGMII, this might be a problem. However, I don't know that it is, so there is no Fixes: tag. The issue was observed through code inspection.
Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com Reviewed-by: Andrew Lunn andrew@lunn.ch Link: https://patch.msgid.link/20251117234033.345679-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/realtek/realtek_main.c | 65 +++++++++++++++----------- 1 file changed, 39 insertions(+), 26 deletions(-)
diff --git a/drivers/net/phy/realtek/realtek_main.c b/drivers/net/phy/realtek/realtek_main.c index 16a347084293e..b26f4d1c6bbfa 100644 --- a/drivers/net/phy/realtek/realtek_main.c +++ b/drivers/net/phy/realtek/realtek_main.c @@ -560,22 +560,11 @@ static int rtl8211c_config_init(struct phy_device *phydev) CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER); }
-static int rtl8211f_config_init(struct phy_device *phydev) +static int rtl8211f_config_rgmii_delay(struct phy_device *phydev) { - struct rtl821x_priv *priv = phydev->priv; - struct device *dev = &phydev->mdio.dev; u16 val_txdly, val_rxdly; int ret;
- ret = phy_modify_paged_changed(phydev, RTL8211F_PHYCR_PAGE, RTL8211F_PHYCR1, - RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF, - priv->phycr1); - if (ret < 0) { - dev_err(dev, "aldps mode configuration failed: %pe\n", - ERR_PTR(ret)); - return ret; - } - switch (phydev->interface) { case PHY_INTERFACE_MODE_RGMII: val_txdly = 0; @@ -605,34 +594,58 @@ static int rtl8211f_config_init(struct phy_device *phydev) RTL8211F_TXCR, RTL8211F_TX_DELAY, val_txdly); if (ret < 0) { - dev_err(dev, "Failed to update the TX delay register\n"); + phydev_err(phydev, "Failed to update the TX delay register: %pe\n", + ERR_PTR(ret)); return ret; } else if (ret) { - dev_dbg(dev, - "%s 2ns TX delay (and changing the value from pin-strapping RXD1 or the bootloader)\n", - str_enable_disable(val_txdly)); + phydev_dbg(phydev, + "%s 2ns TX delay (and changing the value from pin-strapping RXD1 or the bootloader)\n", + str_enable_disable(val_txdly)); } else { - dev_dbg(dev, - "2ns TX delay was already %s (by pin-strapping RXD1 or bootloader configuration)\n", - str_enabled_disabled(val_txdly)); + phydev_dbg(phydev, + "2ns TX delay was already %s (by pin-strapping RXD1 or bootloader configuration)\n", + str_enabled_disabled(val_txdly)); }
ret = phy_modify_paged_changed(phydev, RTL8211F_RGMII_PAGE, RTL8211F_RXCR, RTL8211F_RX_DELAY, val_rxdly); if (ret < 0) { - dev_err(dev, "Failed to update the RX delay register\n"); + phydev_err(phydev, "Failed to update the RX delay register: %pe\n", + ERR_PTR(ret)); return ret; } else if (ret) { - dev_dbg(dev, - "%s 2ns RX delay (and changing the value from pin-strapping RXD0 or the bootloader)\n", - str_enable_disable(val_rxdly)); + phydev_dbg(phydev, + "%s 2ns RX delay (and changing the value from pin-strapping RXD0 or the bootloader)\n", + str_enable_disable(val_rxdly)); } else { - dev_dbg(dev, - "2ns RX delay was already %s (by pin-strapping RXD0 or bootloader configuration)\n", - str_enabled_disabled(val_rxdly)); + phydev_dbg(phydev, + "2ns RX delay was already %s (by pin-strapping RXD0 or bootloader configuration)\n", + str_enabled_disabled(val_rxdly)); }
+ return 0; +} + +static int rtl8211f_config_init(struct phy_device *phydev) +{ + struct rtl821x_priv *priv = phydev->priv; + struct device *dev = &phydev->mdio.dev; + int ret; + + ret = phy_modify_paged_changed(phydev, RTL8211F_PHYCR_PAGE, RTL8211F_PHYCR1, + RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF, + priv->phycr1); + if (ret < 0) { + dev_err(dev, "aldps mode configuration failed: %pe\n", + ERR_PTR(ret)); + return ret; + } + + ret = rtl8211f_config_rgmii_delay(phydev); + if (ret) + return ret; + if (!priv->has_phycr2) return 0;