5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Schmitz schmitzmic@gmail.com
commit 8a1f00b753ecfdb117dc1a07e68c46d80e7923ea upstream.
With commit 44b1fbc0f5f3 ("m68k/q40: Replace q40ide driver with pata_falcon and falconide"), the Q40 IDE driver was replaced by pata_falcon.c.
Both IO and memory resources were defined for the Q40 IDE platform device, but definition of the IDE register addresses was modeled after the Falcon case, both in use of the memory resources and in including register shift and byte vs. word offset in the address.
This was correct for the Falcon case, which does not apply any address translation to the register addresses. In the Q40 case, all of device base address, byte access offset and register shift is included in the platform specific ISA access translation (in asm/mm_io.h).
As a consequence, such address translation gets applied twice, and register addresses are mangled.
Use the device base address from the platform IO resource for Q40 (the IO address translation will then add the correct ISA window base address and byte access offset), with register shift 1. Use MMIO base address and register shift 2 as before for Falcon.
Encode PIO_OFFSET into IO port addresses for all registers for Q40 except the data transfer register. Encode the MMIO offset there (pata_falcon_data_xfer() directly uses raw IO with no address translation).
Reported-by: William R Sowerbutts will@sowerbutts.com Closes: https://lore.kernel.org/r/CAMuHMdUU62jjunJh9cqSqHT87B0H0A4udOOPs=WN7WZKpcagV... Link: https://lore.kernel.org/r/CAMuHMdUU62jjunJh9cqSqHT87B0H0A4udOOPs=WN7WZKpcagV... Fixes: 44b1fbc0f5f3 ("m68k/q40: Replace q40ide driver with pata_falcon and falconide") Cc: stable@vger.kernel.org Cc: Finn Thain fthain@linux-m68k.org Cc: Geert Uytterhoeven geert@linux-m68k.org Tested-by: William R Sowerbutts will@sowerbutts.com Signed-off-by: Michael Schmitz schmitzmic@gmail.com Reviewed-by: Sergey Shtylyov s.shtylyov@omp.ru Reviewed-by: Geert Uytterhoeven geert@linux-m68k.org Signed-off-by: Damien Le Moal dlemoal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ata/pata_falcon.c | 50 ++++++++++++++++++++++++++-------------------- 1 file changed, 29 insertions(+), 21 deletions(-)
--- a/drivers/ata/pata_falcon.c +++ b/drivers/ata/pata_falcon.c @@ -123,8 +123,8 @@ static int __init pata_falcon_init_one(s struct resource *base_res, *ctl_res, *irq_res; struct ata_host *host; struct ata_port *ap; - void __iomem *base; - int irq = 0; + void __iomem *base, *ctl_base; + int irq = 0, io_offset = 1, reg_shift = 2; /* Falcon defaults */
dev_info(&pdev->dev, "Atari Falcon and Q40/Q60 PATA controller\n");
@@ -165,26 +165,34 @@ static int __init pata_falcon_init_one(s ap->pio_mask = ATA_PIO4; ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
- base = (void __iomem *)base_mem_res->start; /* N.B. this assumes data_addr will be used for word-sized I/O only */ - ap->ioaddr.data_addr = base + 0 + 0 * 4; - ap->ioaddr.error_addr = base + 1 + 1 * 4; - ap->ioaddr.feature_addr = base + 1 + 1 * 4; - ap->ioaddr.nsect_addr = base + 1 + 2 * 4; - ap->ioaddr.lbal_addr = base + 1 + 3 * 4; - ap->ioaddr.lbam_addr = base + 1 + 4 * 4; - ap->ioaddr.lbah_addr = base + 1 + 5 * 4; - ap->ioaddr.device_addr = base + 1 + 6 * 4; - ap->ioaddr.status_addr = base + 1 + 7 * 4; - ap->ioaddr.command_addr = base + 1 + 7 * 4; - - base = (void __iomem *)ctl_mem_res->start; - ap->ioaddr.altstatus_addr = base + 1; - ap->ioaddr.ctl_addr = base + 1; - - ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", - (unsigned long)base_mem_res->start, - (unsigned long)ctl_mem_res->start); + ap->ioaddr.data_addr = (void __iomem *)base_mem_res->start; + + if (base_res) { /* only Q40 has IO resources */ + io_offset = 0x10000; + reg_shift = 0; + base = (void __iomem *)base_res->start; + ctl_base = (void __iomem *)ctl_res->start; + } else { + base = (void __iomem *)base_mem_res->start; + ctl_base = (void __iomem *)ctl_mem_res->start; + } + + ap->ioaddr.error_addr = base + io_offset + (1 << reg_shift); + ap->ioaddr.feature_addr = base + io_offset + (1 << reg_shift); + ap->ioaddr.nsect_addr = base + io_offset + (2 << reg_shift); + ap->ioaddr.lbal_addr = base + io_offset + (3 << reg_shift); + ap->ioaddr.lbam_addr = base + io_offset + (4 << reg_shift); + ap->ioaddr.lbah_addr = base + io_offset + (5 << reg_shift); + ap->ioaddr.device_addr = base + io_offset + (6 << reg_shift); + ap->ioaddr.status_addr = base + io_offset + (7 << reg_shift); + ap->ioaddr.command_addr = base + io_offset + (7 << reg_shift); + + ap->ioaddr.altstatus_addr = ctl_base + io_offset; + ap->ioaddr.ctl_addr = ctl_base + io_offset; + + ata_port_desc(ap, "cmd %px ctl %px data %px", + base, ctl_base, ap->ioaddr.data_addr);
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (irq_res && irq_res->start > 0) {