Don't allow USB3 U1 or U2 if the latency to wake up from the U-state reaches the service interval for a periodic endpoint.
This is according to xhci 1.1 specification section 4.23.5.2 extra note:
"Software shall ensure that a device is prevented from entering a U-state where its worst case exit latency approaches the ESIT."
Allowing too long exit latencies for periodic endpoint confuses xHC internal scheduling, and new devices may fail to enumerate with a "Not enough bandwidth for new device state" error from the host.
Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com --- drivers/usb/host/xhci.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index c20b85e..dae3be1 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4514,6 +4514,14 @@ static u16 xhci_calculate_u1_timeout(struct xhci_hcd *xhci, { unsigned long long timeout_ns;
+ /* Prevent U1 if service interval is shorter than U1 exit latency */ + if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) { + if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) { + dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n"); + return USB3_LPM_DISABLED; + } + } + if (xhci->quirks & XHCI_INTEL_HOST) timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc); else @@ -4570,6 +4578,14 @@ static u16 xhci_calculate_u2_timeout(struct xhci_hcd *xhci, { unsigned long long timeout_ns;
+ /* Prevent U2 if service interval is shorter than U2 exit latency */ + if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) { + if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) { + dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n"); + return USB3_LPM_DISABLED; + } + } + if (xhci->quirks & XHCI_INTEL_HOST) timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc); else