From: Tim Harvey tharvey@gateworks.com
[ Upstream commit ec2cb52fcfef5d58574f2cfbc9a99ffc20ae5a9d ]
The GW71xx does not have a gpio controlled vbus regulator but it does require some pinctrl. Remove the regulator and move the valid pinctrl into the usbotg1 node.
Fixes: bd306fdb4e60 ("arm64: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS") Signed-off-by: Tim Harvey tharvey@gateworks.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../dts/freescale/imx8mm-venice-gw71xx.dtsi | 29 ++++++------------- 1 file changed, 9 insertions(+), 20 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi index 7ea909a4c1d5e..6de00c9dcd349 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi @@ -40,17 +40,6 @@ pps { gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; status = "okay"; }; - - reg_usb_otg1_vbus: regulator-usb-otg1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_usb1_en>; - compatible = "regulator-fixed"; - regulator-name = "usb_otg1_vbus"; - gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; };
/* off-board header */ @@ -102,9 +91,10 @@ &uart3 { };
&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; dr_mode = "otg"; over-current-active-low; - vbus-supply = <®_usb_otg1_vbus>; status = "okay"; };
@@ -156,14 +146,6 @@ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 >; };
- pinctrl_reg_usb1_en: regusb1grp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x41 - MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x141 - MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 - >; - }; - pinctrl_spi2: spi2grp { fsl,pins = < MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 @@ -186,4 +168,11 @@ MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 >; }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x141 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 + >; + }; };