From: Qiqi Zhang eddy.zhang@rock-chips.com
[ Upstream commit 8c115864501fc09932cdfec53d9ec1cde82b4a28 ]
According to the description in ti-sn65dsi86's datasheet:
CHA_HSYNC_POLARITY: 0 = Active High Pulse. Synchronization signal is high for the sync pulse width. (default) 1 = Active Low Pulse. Synchronization signal is low for the sync pulse width.
CHA_VSYNC_POLARITY: 0 = Active High Pulse. Synchronization signal is high for the sync pulse width. (Default) 1 = Active Low Pulse. Synchronization signal is low for the sync pulse width.
We should only set these bits when the polarity is negative.
Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver") Signed-off-by: Qiqi Zhang eddy.zhang@rock-chips.com Reviewed-by: Douglas Anderson dianders@chromium.org Tested-by: Douglas Anderson dianders@chromium.org Reviewed-by: Tomi Valkeinen tomi.valkeinen@ideasonboard.com Signed-off-by: Douglas Anderson dianders@chromium.org Link: https://patchwork.freedesktop.org/patch/msgid/20221125104558.84616-1-eddy.zh... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/bridge/ti-sn65dsi86.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c index 1a58481037b3..77a447a3fb1d 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c @@ -621,9 +621,9 @@ static void ti_sn_bridge_set_video_timings(struct ti_sn_bridge *pdata) &pdata->bridge.encoder->crtc->state->adjusted_mode; u8 hsync_polarity = 0, vsync_polarity = 0;
- if (mode->flags & DRM_MODE_FLAG_PHSYNC) + if (mode->flags & DRM_MODE_FLAG_NHSYNC) hsync_polarity = CHA_HSYNC_POLARITY; - if (mode->flags & DRM_MODE_FLAG_PVSYNC) + if (mode->flags & DRM_MODE_FLAG_NVSYNC) vsync_polarity = CHA_VSYNC_POLARITY;
ti_sn_bridge_write_u16(pdata, SN_CHA_ACTIVE_LINE_LENGTH_LOW_REG,