From: Lukas Wunner lukas@wunner.de
commit 23584c1ed3e15a6f4bfab8dc5a88d94ab929ee12 upstream.
The Power Fault Detected bit in the Slot Status register differs from all other hotplug events in that it is sticky: It can only be cleared after turning off slot power. Per PCIe r5.0, sec. 6.7.1.8:
If a power controller detects a main power fault on the hot-plug slot, it must automatically set its internal main power fault latch [...]. The main power fault latch is cleared when software turns off power to the hot-plug slot.
The stickiness used to cause interrupt storms and infinite loops which were fixed in 2009 by commits 5651c48cfafe ("PCI pciehp: fix power fault interrupt storm problem") and 99f0169c17f3 ("PCI: pciehp: enable software notification on empty slots").
Unfortunately in 2020 the infinite loop issue was inadvertently reintroduced by commit 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt race"): The hardirq handler pciehp_isr() clears the PFD bit until pciehp's power_fault_detected flag is set. That happens in the IRQ thread pciehp_ist(), which never learns of the event because the hardirq handler is stuck in an infinite loop. Fix by setting the power_fault_detected flag already in the hardirq handler.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214989 Link: https://lore.kernel.org/linux-pci/DM8PR11MB5702255A6A92F735D90A4446868B9@DM8... Fixes: 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt race") Link: https://lore.kernel.org/r/66eaeef31d4997ceea357ad93259f290ededecfd.163718722... Reported-by: Joseph Bao joseph.bao@intel.com Tested-by: Joseph Bao joseph.bao@intel.com Signed-off-by: Lukas Wunner lukas@wunner.de Signed-off-by: Bjorn Helgaas bhelgaas@google.com Cc: stable@vger.kernel.org # v4.19+ Cc: Stuart Hayes stuart.w.hayes@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/hotplug/pciehp_hpc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -577,6 +577,8 @@ read_status: */ if (ctrl->power_fault_detected) status &= ~PCI_EXP_SLTSTA_PFD; + else if (status & PCI_EXP_SLTSTA_PFD) + ctrl->power_fault_detected = true;
events |= status; if (!events) { @@ -586,7 +588,7 @@ read_status: }
if (status) { - pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, events); + pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, status);
/* * In MSI mode, all event bits must be zero before the port @@ -660,8 +662,7 @@ static irqreturn_t pciehp_ist(int irq, v }
/* Check Power Fault Detected */ - if ((events & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) { - ctrl->power_fault_detected = 1; + if (events & PCI_EXP_SLTSTA_PFD) { ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(ctrl)); pciehp_set_indicators(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF, PCI_EXP_SLTCTL_ATTN_IND_ON);