From: Linus Walleij linus.walleij@linaro.org
[ Upstream commit 7e1301ed1881447d2a25f9c6423738c33cbca133 ]
The VLANs and PVIDs on the RTL8366 utilizes a "member configuration" (MC) which is largely unexplained in the code.
This set-up requires a special ordering: rtl8366_set_pvid() must be called first, followed by rtl8366_set_vlan(), else the MC will not be properly allocated. Relax this by factoring out the code obtaining an MC and reuse the helper in both rtl8366_set_pvid() and rtl8366_set_vlan() so we remove this strict ordering requirement.
In the process, add some better comments and debug prints so people who read the code understand what is going on.
Reviewed-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/dsa/realtek-smi-core.h | 4 +- drivers/net/dsa/rtl8366.c | 273 +++++++++++++++-------------- 2 files changed, 146 insertions(+), 131 deletions(-)
diff --git a/drivers/net/dsa/realtek-smi-core.h b/drivers/net/dsa/realtek-smi-core.h index 9a63b51e1d82f..6f2dab7e33d65 100644 --- a/drivers/net/dsa/realtek-smi-core.h +++ b/drivers/net/dsa/realtek-smi-core.h @@ -25,6 +25,9 @@ struct rtl8366_mib_counter { const char *name; };
+/** + * struct rtl8366_vlan_mc - Virtual LAN member configuration + */ struct rtl8366_vlan_mc { u16 vid; u16 untag; @@ -119,7 +122,6 @@ int realtek_smi_setup_mdio(struct realtek_smi *smi); int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used); int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member, u32 untag, u32 fid); -int rtl8366_get_pvid(struct realtek_smi *smi, int port, int *val); int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port, unsigned int vid); int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable); diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c index a62d76a048dfa..b941d45edd641 100644 --- a/drivers/net/dsa/rtl8366.c +++ b/drivers/net/dsa/rtl8366.c @@ -36,12 +36,110 @@ int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used) } EXPORT_SYMBOL_GPL(rtl8366_mc_is_used);
+/** + * rtl8366_obtain_mc() - retrieve or allocate a VLAN member configuration + * @smi: the Realtek SMI device instance + * @vid: the VLAN ID to look up or allocate + * @vlanmc: the pointer will be assigned to a pointer to a valid member config + * if successful + * @return: index of a new member config or negative error number + */ +static int rtl8366_obtain_mc(struct realtek_smi *smi, int vid, + struct rtl8366_vlan_mc *vlanmc) +{ + struct rtl8366_vlan_4k vlan4k; + int ret; + int i; + + /* Try to find an existing member config entry for this VID */ + for (i = 0; i < smi->num_vlan_mc; i++) { + ret = smi->ops->get_vlan_mc(smi, i, vlanmc); + if (ret) { + dev_err(smi->dev, "error searching for VLAN MC %d for VID %d\n", + i, vid); + return ret; + } + + if (vid == vlanmc->vid) + return i; + } + + /* We have no MC entry for this VID, try to find an empty one */ + for (i = 0; i < smi->num_vlan_mc; i++) { + ret = smi->ops->get_vlan_mc(smi, i, vlanmc); + if (ret) { + dev_err(smi->dev, "error searching for VLAN MC %d for VID %d\n", + i, vid); + return ret; + } + + if (vlanmc->vid == 0 && vlanmc->member == 0) { + /* Update the entry from the 4K table */ + ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k); + if (ret) { + dev_err(smi->dev, "error looking for 4K VLAN MC %d for VID %d\n", + i, vid); + return ret; + } + + vlanmc->vid = vid; + vlanmc->member = vlan4k.member; + vlanmc->untag = vlan4k.untag; + vlanmc->fid = vlan4k.fid; + ret = smi->ops->set_vlan_mc(smi, i, vlanmc); + if (ret) { + dev_err(smi->dev, "unable to set/update VLAN MC %d for VID %d\n", + i, vid); + return ret; + } + + dev_dbg(smi->dev, "created new MC at index %d for VID %d\n", + i, vid); + return i; + } + } + + /* MC table is full, try to find an unused entry and replace it */ + for (i = 0; i < smi->num_vlan_mc; i++) { + int used; + + ret = rtl8366_mc_is_used(smi, i, &used); + if (ret) + return ret; + + if (!used) { + /* Update the entry from the 4K table */ + ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k); + if (ret) + return ret; + + vlanmc->vid = vid; + vlanmc->member = vlan4k.member; + vlanmc->untag = vlan4k.untag; + vlanmc->fid = vlan4k.fid; + ret = smi->ops->set_vlan_mc(smi, i, vlanmc); + if (ret) { + dev_err(smi->dev, "unable to set/update VLAN MC %d for VID %d\n", + i, vid); + return ret; + } + dev_dbg(smi->dev, "recycled MC at index %i for VID %d\n", + i, vid); + return i; + } + } + + dev_err(smi->dev, "all VLAN member configurations are in use\n"); + return -ENOSPC; +} + int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member, u32 untag, u32 fid) { + struct rtl8366_vlan_mc vlanmc; struct rtl8366_vlan_4k vlan4k; + int mc; int ret; - int i;
if (!smi->ops->is_vlan_valid(smi, vid)) return -EINVAL; @@ -66,136 +164,58 @@ int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member, "resulting VLAN%d 4k members: 0x%02x, untagged: 0x%02x\n", vid, vlan4k.member, vlan4k.untag);
- /* Try to find an existing MC entry for this VID */ - for (i = 0; i < smi->num_vlan_mc; i++) { - struct rtl8366_vlan_mc vlanmc; - - ret = smi->ops->get_vlan_mc(smi, i, &vlanmc); - if (ret) - return ret; - - if (vid == vlanmc.vid) { - /* update the MC entry */ - vlanmc.member |= member; - vlanmc.untag |= untag; - vlanmc.fid = fid; - - ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + /* Find or allocate a member config for this VID */ + ret = rtl8366_obtain_mc(smi, vid, &vlanmc); + if (ret < 0) + return ret; + mc = ret;
- dev_dbg(smi->dev, - "resulting VLAN%d MC members: 0x%02x, untagged: 0x%02x\n", - vid, vlanmc.member, vlanmc.untag); + /* Update the MC entry */ + vlanmc.member |= member; + vlanmc.untag |= untag; + vlanmc.fid = fid;
- break; - } - } + /* Commit updates to the MC entry */ + ret = smi->ops->set_vlan_mc(smi, mc, &vlanmc); + if (ret) + dev_err(smi->dev, "failed to commit changes to VLAN MC index %d for VID %d\n", + mc, vid); + else + dev_dbg(smi->dev, + "resulting VLAN%d MC members: 0x%02x, untagged: 0x%02x\n", + vid, vlanmc.member, vlanmc.untag);
return ret; } EXPORT_SYMBOL_GPL(rtl8366_set_vlan);
-int rtl8366_get_pvid(struct realtek_smi *smi, int port, int *val) -{ - struct rtl8366_vlan_mc vlanmc; - int ret; - int index; - - ret = smi->ops->get_mc_index(smi, port, &index); - if (ret) - return ret; - - ret = smi->ops->get_vlan_mc(smi, index, &vlanmc); - if (ret) - return ret; - - *val = vlanmc.vid; - return 0; -} -EXPORT_SYMBOL_GPL(rtl8366_get_pvid); - int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port, unsigned int vid) { struct rtl8366_vlan_mc vlanmc; - struct rtl8366_vlan_4k vlan4k; + int mc; int ret; - int i;
if (!smi->ops->is_vlan_valid(smi, vid)) return -EINVAL;
- /* Try to find an existing MC entry for this VID */ - for (i = 0; i < smi->num_vlan_mc; i++) { - ret = smi->ops->get_vlan_mc(smi, i, &vlanmc); - if (ret) - return ret; - - if (vid == vlanmc.vid) { - ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); - if (ret) - return ret; - - ret = smi->ops->set_mc_index(smi, port, i); - return ret; - } - } - - /* We have no MC entry for this VID, try to find an empty one */ - for (i = 0; i < smi->num_vlan_mc; i++) { - ret = smi->ops->get_vlan_mc(smi, i, &vlanmc); - if (ret) - return ret; - - if (vlanmc.vid == 0 && vlanmc.member == 0) { - /* Update the entry from the 4K table */ - ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k); - if (ret) - return ret; - - vlanmc.vid = vid; - vlanmc.member = vlan4k.member; - vlanmc.untag = vlan4k.untag; - vlanmc.fid = vlan4k.fid; - ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); - if (ret) - return ret; - - ret = smi->ops->set_mc_index(smi, port, i); - return ret; - } - } - - /* MC table is full, try to find an unused entry and replace it */ - for (i = 0; i < smi->num_vlan_mc; i++) { - int used; - - ret = rtl8366_mc_is_used(smi, i, &used); - if (ret) - return ret; - - if (!used) { - /* Update the entry from the 4K table */ - ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k); - if (ret) - return ret; - - vlanmc.vid = vid; - vlanmc.member = vlan4k.member; - vlanmc.untag = vlan4k.untag; - vlanmc.fid = vlan4k.fid; - ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); - if (ret) - return ret; + /* Find or allocate a member config for this VID */ + ret = rtl8366_obtain_mc(smi, vid, &vlanmc); + if (ret < 0) + return ret; + mc = ret;
- ret = smi->ops->set_mc_index(smi, port, i); - return ret; - } + ret = smi->ops->set_mc_index(smi, port, mc); + if (ret) { + dev_err(smi->dev, "set PVID: failed to set MC index %d for port %d\n", + mc, port); + return ret; }
- dev_err(smi->dev, - "all VLAN member configurations are in use\n"); + dev_dbg(smi->dev, "set PVID: the PVID for port %d set to %d using existing MC index %d\n", + port, vid, mc);
- return -ENOSPC; + return 0; } EXPORT_SYMBOL_GPL(rtl8366_set_pvid);
@@ -395,7 +415,8 @@ void rtl8366_vlan_add(struct dsa_switch *ds, int port, if (!smi->ops->is_vlan_valid(smi, vid)) return;
- dev_info(smi->dev, "add VLAN on port %d, %s, %s\n", + dev_info(smi->dev, "add VLAN %d on port %d, %s, %s\n", + vlan->vid_begin, port, untagged ? "untagged" : "tagged", pvid ? " PVID" : "no PVID"); @@ -404,34 +425,26 @@ void rtl8366_vlan_add(struct dsa_switch *ds, int port, dev_err(smi->dev, "port is DSA or CPU port\n");
for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { - int pvid_val = 0; - - dev_info(smi->dev, "add VLAN %04x\n", vid); member |= BIT(port);
if (untagged) untag |= BIT(port);
- /* To ensure that we have a valid MC entry for this VLAN, - * initialize the port VLAN ID here. - */ - ret = rtl8366_get_pvid(smi, port, &pvid_val); - if (ret < 0) { - dev_err(smi->dev, "could not lookup PVID for port %d\n", - port); - return; - } - if (pvid_val == 0) { - ret = rtl8366_set_pvid(smi, port, vid); - if (ret < 0) - return; - } - ret = rtl8366_set_vlan(smi, vid, member, untag, 0); if (ret) dev_err(smi->dev, "failed to set up VLAN %04x", vid); + + ret = rtl8366_set_pvid(smi, port, vid); + if (ret) + dev_err(smi->dev, + "failed to set PVID on port %d to VLAN %04x", + port, vid); + + if (!ret) + dev_dbg(smi->dev, "VLAN add: added VLAN %d with PVID on port %d\n", + vid, port); } } EXPORT_SYMBOL_GPL(rtl8366_vlan_add);