The patch below does not apply to the 6.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.4.y git checkout FETCH_HEAD git cherry-pick -x e58f30246c35c126c7571065b33bee4b3b1d2ef8 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2023081219-shucking-purist-bd23@gregkh' --subject-prefix 'PATCH 6.4.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From e58f30246c35c126c7571065b33bee4b3b1d2ef8 Mon Sep 17 00:00:00 2001 From: Li Yang leoyang.li@nxp.com Date: Wed, 2 Aug 2023 14:13:46 -0500 Subject: [PATCH] net: phy: at803x: fix the wol setting functions
In commit 7beecaf7d507 ("net: phy: at803x: improve the WOL feature"), it seems not correct to use a wol_en bit in a 1588 Control Register which is only available on AR8031/AR8033(share the same phy_id) to determine if WoL is enabled. Change it back to use AT803X_INTR_ENABLE_WOL for determining the WoL status which is applicable on all chips supporting wol. Also update the at803x_set_wol() function to only update the 1588 register on chips having it. After this change, disabling wol at probe from commit d7cd5e06c9dd ("net: phy: at803x: disable WOL at probe") is no longer needed. Change it to just disable the WoL bit in 1588 register for AR8031/AR8033 to be aligned with AT803X_INTR_ENABLE_WOL in probe.
Fixes: 7beecaf7d507 ("net: phy: at803x: improve the WOL feature") Signed-off-by: Li Yang leoyang.li@nxp.com Reviewed-by: Viorel Suman viorel.suman@nxp.com Reviewed-by: Wei Fang wei.fang@nxp.com Reviewed-by: Russell King (Oracle) rmk+kernel@armlinux.org.uk Signed-off-by: David S. Miller davem@davemloft.net
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index c1f307d90518..9c2c2e2ee94b 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -459,21 +459,27 @@ static int at803x_set_wol(struct phy_device *phydev, phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i], mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
- /* Enable WOL function */ - ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL, - 0, AT803X_WOL_EN); - if (ret) - return ret; + /* Enable WOL function for 1588 */ + if (phydev->drv->phy_id == ATH8031_PHY_ID) { + ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, + AT803X_PHY_MMD3_WOL_CTRL, + 0, AT803X_WOL_EN); + if (ret) + return ret; + } /* Enable WOL interrupt */ ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL); if (ret) return ret; } else { - /* Disable WoL function */ - ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL, - AT803X_WOL_EN, 0); - if (ret) - return ret; + /* Disable WoL function for 1588 */ + if (phydev->drv->phy_id == ATH8031_PHY_ID) { + ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, + AT803X_PHY_MMD3_WOL_CTRL, + AT803X_WOL_EN, 0); + if (ret) + return ret; + } /* Disable WOL interrupt */ ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0); if (ret) @@ -508,11 +514,11 @@ static void at803x_get_wol(struct phy_device *phydev, wol->supported = WAKE_MAGIC; wol->wolopts = 0;
- value = phy_read_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL); + value = phy_read(phydev, AT803X_INTR_ENABLE); if (value < 0) return;
- if (value & AT803X_WOL_EN) + if (value & AT803X_INTR_ENABLE_WOL) wol->wolopts |= WAKE_MAGIC; }
@@ -858,9 +864,6 @@ static int at803x_probe(struct phy_device *phydev) if (phydev->drv->phy_id == ATH8031_PHY_ID) { int ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG); int mode_cfg; - struct ethtool_wolinfo wol = { - .wolopts = 0, - };
if (ccr < 0) return ccr; @@ -877,12 +880,14 @@ static int at803x_probe(struct phy_device *phydev) break; }
- /* Disable WOL by default */ - ret = at803x_set_wol(phydev, &wol); - if (ret < 0) { - phydev_err(phydev, "failed to disable WOL on probe: %d\n", ret); + /* Disable WoL in 1588 register which is enabled + * by default + */ + ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, + AT803X_PHY_MMD3_WOL_CTRL, + AT803X_WOL_EN, 0); + if (ret) return ret; - } }
return 0;