4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e35e26b26e955c53e61c154ba26b9bb15da6b858 ]
A long running stress test on a custom board shipping an AXG SoCs and a Realtek RTL8211F PHY revealed that after a few hours the connection speed would drop drastically, from ~1000Mbps to ~3Mbps. At the same time the 'macirq' (eth0) IRQ would stop being triggered at all and as consequence the GMAC IRQs never ACKed.
After a painful investigation the problem seemed to be due to a wrong defined IRQ type for the GMAC IRQ that should be LEVEL_HIGH instead of EDGE_RISING.
The change in the macirq IRQ type also solved another long standing issue affecting this SoC/PHY where EEE was causing the network connection to die after stressing it with iperf3 (even though much sooner). It's now possible to remove the 'eee-broken-1000t' quirk as well.
Fixes: 9c15795a4f96 ("ARM: dts: meson8b-odroidc1: ethernet support") Signed-off-by: Carlo Caione ccaione@baylibre.com Reviewed-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Tested-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Signed-off-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/meson.dtsi | 2 +- arch/arm/boot/dts/meson8b-odroidc1.dts | 1 - 2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 0d9faf1a51ea..a86b89086334 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -263,7 +263,7 @@ compatible = "amlogic,meson6-dwmac", "snps,dwmac"; reg = <0xc9410000 0x10000 0xc1108108 0x4>; - interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index ef3177d3da3d..9e48936e2d8d 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -125,7 +125,6 @@ /* Realtek RTL8211F (0x001cc916) */ eth_phy: ethernet-phy@0 { reg = <0>; - eee-broken-1000t; interrupt-parent = <&gpio_intc>; /* GPIOH_3 */ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;