From: dillon min dillon.minfei@gmail.com
[ Upstream commit e4817a1b6b77db538bc0141c3b138f2df803ce87 ]
For NAND Ecc layout, there is a dependency from old kernel's nand driver setting and current. if old kernel use 4 bit ecc , we should use 4 bit in new kernel either. else will run into following error at filesystem mounting.
So, enable fsl,use-minimum-ecc from device tree, to fix this mismatch
[ 9.449265] ubi0: scanning is finished [ 9.463968] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 22528 bytes from PEB 513:4096, read only 22528 bytes, retry [ 9.486940] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 22528 bytes from PEB 513:4096, read only 22528 bytes, retry [ 9.509906] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 22528 bytes from PEB 513:4096, read only 22528 bytes, retry [ 9.532845] ubi0 error: ubi_io_read: error -74 (ECC error) while reading 22528 bytes from PEB 513:4096, read 22528 bytes
Fixes: f9ecf10cb88c ("ARM: dts: imx6ull: add MYiR MYS-6ULX SBC") Signed-off-by: dillon min dillon.minfei@gmail.com Reviewed-by: Fabio Estevam festevam@gmail.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts index ecbb2cc5b9ab..79cc45728cd2 100644 --- a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts +++ b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts @@ -14,5 +14,6 @@ };
&gpmi { + fsl,use-minimum-ecc; status = "okay"; };