[ Upstream commit e37c2deafe7058cf7989c4c47bbf1140cc867d89 ]
When master clock is used, master clock rate is set exclusively. Parent clocks of master clock cannot be changed after a call to clk_set_rate_exclusive(). So the parent clock of SAI kernel clock must be set before. Ensure also that exclusive rate operations are balanced in STM32 SAI driver.
Signed-off-by: Olivier Moysan olivier.moysan@st.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/stm/stm32_sai_sub.c | 64 +++++++++++++++++++++++++---------- 1 file changed, 47 insertions(+), 17 deletions(-)
diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c index bc69e68191ad1..1cf9df4b6f11c 100644 --- a/sound/soc/stm/stm32_sai_sub.c +++ b/sound/soc/stm/stm32_sai_sub.c @@ -70,6 +70,7 @@ #define SAI_IEC60958_STATUS_BYTES 24
#define SAI_MCLK_NAME_LEN 32 +#define SAI_RATE_11K 11025
/** * struct stm32_sai_sub_data - private data of SAI sub block (block A or B) @@ -309,6 +310,25 @@ static int stm32_sai_set_clk_div(struct stm32_sai_sub_data *sai, return ret; }
+static int stm32_sai_set_parent_clock(struct stm32_sai_sub_data *sai, + unsigned int rate) +{ + struct platform_device *pdev = sai->pdev; + struct clk *parent_clk = sai->pdata->clk_x8k; + int ret; + + if (!(rate % SAI_RATE_11K)) + parent_clk = sai->pdata->clk_x11k; + + ret = clk_set_parent(sai->sai_ck, parent_clk); + if (ret) + dev_err(&pdev->dev, " Error %d setting sai_ck parent clock. %s", + ret, ret == -EBUSY ? + "Active stream rates conflict\n" : "\n"); + + return ret; +} + static long stm32_sai_mclk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) { @@ -490,25 +510,29 @@ static int stm32_sai_set_sysclk(struct snd_soc_dai *cpu_dai, struct stm32_sai_sub_data *sai = snd_soc_dai_get_drvdata(cpu_dai); int ret;
- if (dir == SND_SOC_CLOCK_OUT) { + if (dir == SND_SOC_CLOCK_OUT && sai->sai_mclk) { ret = regmap_update_bits(sai->regmap, STM_SAI_CR1_REGX, SAI_XCR1_NODIV, (unsigned int)~SAI_XCR1_NODIV); if (ret < 0) return ret;
- dev_dbg(cpu_dai->dev, "SAI MCLK frequency is %uHz\n", freq); - sai->mclk_rate = freq; + /* If master clock is used, set parent clock now */ + ret = stm32_sai_set_parent_clock(sai, freq); + if (ret) + return ret;
- if (sai->sai_mclk) { - ret = clk_set_rate_exclusive(sai->sai_mclk, - sai->mclk_rate); - if (ret) { - dev_err(cpu_dai->dev, - "Could not set mclk rate\n"); - return ret; - } + ret = clk_set_rate_exclusive(sai->sai_mclk, freq); + if (ret) { + dev_err(cpu_dai->dev, + ret == -EBUSY ? + "Active streams have incompatible rates" : + "Could not set mclk rate\n"); + return ret; } + + dev_dbg(cpu_dai->dev, "SAI MCLK frequency is %uHz\n", freq); + sai->mclk_rate = freq; }
return 0; @@ -916,11 +940,13 @@ static int stm32_sai_configure_clock(struct snd_soc_dai *cpu_dai, int cr1, mask, div = 0; int sai_clk_rate, mclk_ratio, den; unsigned int rate = params_rate(params); + int ret;
- if (!(rate % 11025)) - clk_set_parent(sai->sai_ck, sai->pdata->clk_x11k); - else - clk_set_parent(sai->sai_ck, sai->pdata->clk_x8k); + if (!sai->sai_mclk) { + ret = stm32_sai_set_parent_clock(sai, rate); + if (ret) + return ret; + } sai_clk_rate = clk_get_rate(sai->sai_ck);
if (STM_SAI_IS_F4(sai->pdata)) { @@ -1075,9 +1101,13 @@ static void stm32_sai_shutdown(struct snd_pcm_substream *substream, regmap_update_bits(sai->regmap, STM_SAI_CR1_REGX, SAI_XCR1_NODIV, SAI_XCR1_NODIV);
- clk_disable_unprepare(sai->sai_ck); + /* Release mclk rate only if rate was actually set */ + if (sai->mclk_rate) { + clk_rate_exclusive_put(sai->sai_mclk); + sai->mclk_rate = 0; + }
- clk_rate_exclusive_put(sai->sai_mclk); + clk_disable_unprepare(sai->sai_ck);
spin_lock_irqsave(&sai->irq_lock, flags); sai->substream = NULL;