From: Chen-Yu Tsai wens@csie.org
[ Upstream commit e4dae01bf08b754de79072441c357737220b873f ]
The Bananapi M2+ uses a GPIO line to change the effective resistance of the CPU supply regulator's feedback resistor network. The voltages described in the device tree were given directly by the vendor. This turns out to be slightly off compared to the real values.
The updated voltages are based on calculations of the feedback resistor network, and verified down to three decimal places with a multi-meter.
Fixes: 6eeb4180d4b9 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees") Signed-off-by: Chen-Yu Tsai wens@csie.org Signed-off-by: Maxime Ripard maxime@cerno.tech Link: https://lore.kernel.org/r/20200717160053.31191-4-wens@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi index a628b5ee72b65..235994a4a2ebb 100644 --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi @@ -16,12 +16,12 @@ reg_vdd_cpux: vdd-cpux { regulator-type = "voltage"; regulator-boot-on; regulator-always-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; + regulator-min-microvolt = <1108475>; + regulator-max-microvolt = <1308475>; regulator-ramp-delay = <50>; /* 4ms */ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ gpios-states = <0x1>; - states = <1100000 0>, <1300000 1>; + states = <1108475 0>, <1308475 1>; }; };