6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hongyu Xie xiehongyu1@kylinos.cn
commit a541acceedf4f639f928f41fbb676b75946dc295 upstream.
SanDisk 3.2 Gen2 storage device(0781:55e8) doesn't work well with UAS. Log says, [ 6.507865][ 3] [ T159] usb 2-1.4: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd [ 6.540314][ 3] [ T159] usb 2-1.4: New USB device found, idVendor=0781, idProduct=55e8, bcdDevice= 0.01 [ 6.576304][ 3] [ T159] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.584727][ 3] [ T159] usb 2-1.4: Product: SanDisk 3.2 Gen2 [ 6.590459][ 3] [ T159] usb 2-1.4: Manufacturer: SanDisk [ 6.595845][ 3] [ T159] usb 2-1.4: SerialNumber: 03021707022525140940 [ 7.230852][ 0] [ T265] usbcore: registered new interface driver usb-storage [ 7.251247][ 0] [ T265] scsi host3: uas [ 7.255280][ 0] [ T265] usbcore: registered new interface driver uas [ 7.270498][ 1] [ T192] scsi 3:0:0:0: Direct-Access SanDisk Extreme Pro DDE1 0110 PQ: 0 ANSI: 6 [ 7.299588][ 3] [ T192] scsi 3:0:0:1: Enclosure SanDisk SES Device 0110 PQ: 0 ANSI: 6 [ 7.321681][ 3] [ T192] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 7.328185][ 3] [ T192] scsi 3:0:0:1: Attached scsi generic sg2 type 13 [ 7.328804][ 0] [ T191] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 7.343486][ 0] [ T191] sd 3:0:0:0: [sda] 4096-byte physical blocks [ 7.364611][ 0] [ T191] sd 3:0:0:0: [sda] Write Protect is off [ 7.370524][ 0] [ T191] sd 3:0:0:0: [sda] Mode Sense: 3d 00 10 00 [ 7.390655][ 0] [ T191] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 7.401363][ 0] [ T191] sd 3:0:0:0: [sda] Optimal transfer size 1048576 bytes [ 7.436010][ 0] [ T191] sda: sda1 [ 7.450850][ 0] [ T191] sd 3:0:0:0: [sda] Attached SCSI disk [ 7.470218][ 4] [ T262] scsi 3:0:0:1: Failed to get diagnostic page 0x1 [ 7.474869][ 0] [ C0] sd 3:0:0:0: [sda] tag#0 data cmplt err -75 uas-tag 2 inflight: CMD [ 7.476911][ 4] [ T262] scsi 3:0:0:1: Failed to bind enclosure -19 [ 7.485330][ 0] [ C0] sd 3:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 00 28 00 00 10 00 [ 7.491593][ 4] [ T262] ses 3:0:0:1: Attached Enclosure device [ 38.066980][ 4] [ T192] sd 3:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN [ 38.076012][ 4] [ T192] sd 3:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 00 00 01 08 00 00 f8 00 [ 38.086485][ 4] [ T192] sd 3:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN [ 38.095515][ 4] [ T192] sd 3:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 10 00 00 08 00 [ 38.104122][ 4] [ T192] sd 3:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD IN [ 38.113152][ 4] [ T192] sd 3:0:0:0: [sda] tag#2 CDB: Read(10) 28 00 00 00 00 88 00 00 78 00 [ 38.121761][ 4] [ T192] sd 3:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN [ 38.130791][ 4] [ T192] sd 3:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 00 00 00 48 00 00 30 00 [ 38.139401][ 4] [ T192] sd 3:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD [ 38.148170][ 4] [ T192] sd 3:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 00 28 00 00 10 00 [ 38.178980][ 2] [ T304] scsi host3: uas_eh_device_reset_handler start [ 38.901540][ 2] [ T304] usb 2-1.4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd [ 38.936791][ 2] [ T304] scsi host3: uas_eh_device_reset_handler success
Device decriptor is below, Bus 002 Device 006: ID 0781:55e8 SanDisk Corp. SanDisk 3.2 Gen2 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x0781 SanDisk Corp. idProduct 0x55e8 bcdDevice 0.01 iManufacturer 1 SanDisk iProduct 2 SanDisk 3.2 Gen2 iSerial 3 03021707022525140940 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0079 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 896mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 4 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 98 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Command pipe (0x01) Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 MaxStreams 32 Status pipe (0x02) Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 MaxStreams 32 Data-in pipe (0x03) Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 MaxStreams 32 Data-out pipe (0x04) Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x002a bNumDeviceCaps 3 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x0000f41e BESL Link Power Management (LPM) Supported BESL value 1024 us Deep BESL value 61440 us SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 10 micro seconds bU2DevExitLat 2047 micro seconds SuperSpeedPlus USB Device Capability: bLength 20 bDescriptorType 16 bDevCapabilityType 10 bmAttributes 0x00000001 Sublink Speed Attribute count 1 Sublink Speed ID count 0 wFunctionalitySupport 0x1100 bmSublinkSpeedAttr[0] 0x000a4030 Speed Attribute ID: 0 10Gb/s Symmetric RX SuperSpeedPlus bmSublinkSpeedAttr[1] 0x000a40b0 Speed Attribute ID: 0 10Gb/s Symmetric TX SuperSpeedPlus Device Status: 0x0000 (Bus Powered)
So ignore UAS driver for this device.
Signed-off-by: Hongyu Xie xiehongyu1@kylinos.cn Cc: stable stable@kernel.org Link: https://lore.kernel.org/r/20250519023328.1498856-1-xiehongyu1@kylinos.cn Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/storage/unusual_uas.h | 7 +++++++ 1 file changed, 7 insertions(+)
--- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -52,6 +52,13 @@ UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x99 USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME),
+/* Reported-by: Zhihong Zhou zhouzhihong@greatwall.com.cn */ +UNUSUAL_DEV(0x0781, 0x55e8, 0x0000, 0x9999, + "SanDisk", + "", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), + /* Reported-by: Hongling Zeng zenghongling@kylinos.cn */ UNUSUAL_DEV(0x090c, 0x2000, 0x0000, 0x9999, "Hiksemi",