From: Robert Hancock robert.hancock@calian.com
[ Upstream commit cb6e45c9a0ad9e0f8664fd06db0227d185dc76ab ]
In xiic_process, it is possible that error events such as arbitration lost or TX error can be raised in conjunction with other interrupt flags such as TX FIFO empty or bus not busy. Error events result in the controller being reset and the error returned to the calling request, but the function could potentially try to keep handling the other events, such as by writing more messages into the TX FIFO. Since the transaction has already failed, this is not helpful and will just cause issues.
This problem has been present ever since:
commit 7f9906bd7f72 ("i2c: xiic: Service all interrupts in isr")
which allowed non-error events to be handled after errors, but became more obvious after:
commit 743e227a8959 ("i2c: xiic: Defer xiic_wakeup() and __xiic_start_xfer() in xiic_process()")
which reworked the code to add a WARN_ON which triggers if both the xfer_more and wakeup_req flags were set, since this combination is not supposed to happen, but was occurring in this scenario.
Skip further interrupt handling after error flags are detected to avoid this problem.
Fixes: 7f9906bd7f72 ("i2c: xiic: Service all interrupts in isr") Signed-off-by: Robert Hancock robert.hancock@calian.com Acked-by: Andi Shyti andi.shyti@kernel.org Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-xiic.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index c7f74687282ea..c1f85114ab812 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -409,6 +409,8 @@ static irqreturn_t xiic_process(int irq, void *dev_id) wakeup_req = 1; wakeup_code = STATE_ERROR; } + /* don't try to handle other events */ + goto out; } if (pend & XIIC_INTR_RX_FULL_MASK) { /* Receive register/FIFO is full */