From: H. Nikolaus Schaller hns@goldelico.com
commit 549d7b317c761dbf4ed0c2945aec3acc9ca7ae14 upstream.
bug: the driver reports funny capacity values:
root@letux:/sys/class/power_supply/bq27000-battery# cat uevent POWER_SUPPLY_NAME=bq27000-battery POWER_SUPPLY_STATUS=Charging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_VOLTAGE_NOW=3702000 POWER_SUPPLY_CURRENT_NOW=-464635 POWER_SUPPLY_CAPACITY=1536 <- over 100% is magic POWER_SUPPLY_CAPACITY_LEVEL=Normal POWER_SUPPLY_TEMP=311 POWER_SUPPLY_TIME_TO_FULL_NOW=10440 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CHARGE_FULL=805450 POWER_SUPPLY_CHARGE_NOW=1068 POWER_SUPPLY_CHARGE_FULL_DESIGN=8844998 <- battery has just 1200 mAh POWER_SUPPLY_CYCLE_COUNT=21 POWER_SUPPLY_ENERGY_NOW=0 POWER_SUPPLY_POWER_AVG=0 POWER_SUPPLY_HEALTH=Good POWER_SUPPLY_MANUFACTURER=Texas Instruments
reason: the state of charge and the design capacity register are single byte only. The design capacity returns the higer order byte.
tested: GTA04 with Openmoko/FIC HF08x battery (using hdq)
Fixes: d74534c27775 ("power: bq27xxx_battery: Add support for additional bq27xxx family devices") Signed-off-by: H. Nikolaus Schaller hns@goldelico.com Acked-by: Andrew F. Davis afd@ti.com Reviewed-by: Pali Rohár pali.rohar@gmail.com Signed-off-by: Sebastian Reichel sre@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/power/bq27xxx_battery.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/power/bq27xxx_battery.c +++ b/drivers/power/bq27xxx_battery.c @@ -471,7 +471,10 @@ static int bq27xxx_battery_read_soc(stru { int soc;
- soc = bq27xxx_read(di, BQ27XXX_REG_SOC, false); + if (di->chip == BQ27000 || di->chip == BQ27010) + soc = bq27xxx_read(di, BQ27XXX_REG_SOC, true); + else + soc = bq27xxx_read(di, BQ27XXX_REG_SOC, false);
if (soc < 0) dev_dbg(di->dev, "error reading State-of-Charge\n"); @@ -536,7 +539,10 @@ static int bq27xxx_battery_read_dcap(str { int dcap;
- dcap = bq27xxx_read(di, BQ27XXX_REG_DCAP, false); + if (di->chip == BQ27000 || di->chip == BQ27010) + dcap = bq27xxx_read(di, BQ27XXX_REG_DCAP, true); + else + dcap = bq27xxx_read(di, BQ27XXX_REG_DCAP, false);
if (dcap < 0) { dev_dbg(di->dev, "error reading initial last measured discharge\n"); @@ -544,7 +550,7 @@ static int bq27xxx_battery_read_dcap(str }
if (di->chip == BQ27000 || di->chip == BQ27010) - dcap *= BQ27XXX_CURRENT_CONSTANT / BQ27XXX_RS; + dcap = (dcap << 8) * BQ27XXX_CURRENT_CONSTANT / BQ27XXX_RS; else dcap *= 1000;