>From af5b303ec87dee51c1328c23ba418c93610e1b29 Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Mon, 15 Jan 2018 17:47:23 +0100 Subject: [PATCH 023/273] scsi: devinfo: fix format of the device list Status: RO Content-Length: 2282 Lines: 50 [ Upstream commit 3f884a0a8bdf28cfd1e9987d54d83350096cdd46 ] Replace "" with NULL for product revision level, and merge TEXEL duplicate entries. Cc: Hannes Reinecke Cc: Martin K. Petersen Cc: James E.J. Bottomley Cc: SCSI ML Signed-off-by: Xose Vazquez Perez Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin --- drivers/scsi/scsi_devinfo.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index 6b61b09b3226..9a25e798e195 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -108,8 +108,8 @@ static struct { * seagate controller, which causes SCSI code to reset bus. */ {"HP", "C1750A", "3226", BLIST_NOLUN}, /* scanjet iic */ - {"HP", "C1790A", "", BLIST_NOLUN}, /* scanjet iip */ - {"HP", "C2500A", "", BLIST_NOLUN}, /* scanjet iicx */ + {"HP", "C1790A", NULL, BLIST_NOLUN}, /* scanjet iip */ + {"HP", "C2500A", NULL, BLIST_NOLUN}, /* scanjet iicx */ {"MEDIAVIS", "CDR-H93MV", "1.31", BLIST_NOLUN}, /* locks up */ {"MICROTEK", "ScanMaker II", "5.61", BLIST_NOLUN}, /* responds to all lun */ {"MITSUMI", "CD-R CR-2201CS", "6119", BLIST_NOLUN}, /* locks up */ @@ -119,7 +119,7 @@ static struct { {"QUANTUM", "FIREBALL ST4.3S", "0F0C", BLIST_NOLUN}, /* locks up */ {"RELISYS", "Scorpio", NULL, BLIST_NOLUN}, /* responds to all lun */ {"SANKYO", "CP525", "6.64", BLIST_NOLUN}, /* causes failed REQ SENSE, extra reset */ - {"TEXEL", "CD-ROM", "1.06", BLIST_NOLUN}, + {"TEXEL", "CD-ROM", "1.06", BLIST_NOLUN | BLIST_BORKEN}, {"transtec", "T5008", "0001", BLIST_NOREPORTLUN }, {"YAMAHA", "CDR100", "1.00", BLIST_NOLUN}, /* locks up */ {"YAMAHA", "CDR102", "1.00", BLIST_NOLUN}, /* locks up */ @@ -249,7 +249,6 @@ static struct { {"ST650211", "CF", NULL, BLIST_RETRY_HWERROR}, {"SUN", "T300", "*", BLIST_SPARSELUN}, {"SUN", "T4", "*", BLIST_SPARSELUN}, - {"TEXEL", "CD-ROM", "1.06", BLIST_BORKEN}, {"Tornado-", "F4", "*", BLIST_NOREPORTLUN}, {"TOSHIBA", "CDROM", NULL, BLIST_ISROM}, {"TOSHIBA", "CD-ROM", NULL, BLIST_ISROM}, -- 2.17.0 >From 8d75c2f5d52bcbe18a95d80c228b6dd842f21d60 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 12 Feb 2018 13:18:38 -0800 Subject: [PATCH 089/273] fs/signalfd: fix build error for BUS_MCEERR_AR Status: RO Content-Length: 1650 Lines: 48 [ Upstream commit 9026e820cbd2ea39a06a129ecdddf2739bd3602b ] Fix build error in fs/signalfd.c by using same method that is used in kernel/signal.c: separate blocks for different signal si_code values. ./fs/signalfd.c: error: 'BUS_MCEERR_AR' undeclared (first use in this function) Reported-by: Geert Uytterhoeven Signed-off-by: Randy Dunlap Cc: Alexander Viro Signed-off-by: Eric W. Biederman Signed-off-by: Sasha Levin --- fs/signalfd.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/signalfd.c b/fs/signalfd.c index 270221fcef42..c4e153959e01 100644 --- a/fs/signalfd.c +++ b/fs/signalfd.c @@ -117,13 +117,22 @@ static int signalfd_copyinfo(struct signalfd_siginfo __user *uinfo, err |= __put_user(kinfo->si_trapno, &uinfo->ssi_trapno); #endif #ifdef BUS_MCEERR_AO - /* + /* + * Other callers might not initialize the si_lsb field, + * so check explicitly for the right codes here. + */ + if (kinfo->si_signo == SIGBUS && + kinfo->si_code == BUS_MCEERR_AO) + err |= __put_user((short) kinfo->si_addr_lsb, + &uinfo->ssi_addr_lsb); +#endif +#ifdef BUS_MCEERR_AR + /* * Other callers might not initialize the si_lsb field, * so check explicitly for the right codes here. */ if (kinfo->si_signo == SIGBUS && - (kinfo->si_code == BUS_MCEERR_AR || - kinfo->si_code == BUS_MCEERR_AO)) + kinfo->si_code == BUS_MCEERR_AR) err |= __put_user((short) kinfo->si_addr_lsb, &uinfo->ssi_addr_lsb); #endif -- 2.17.0 >From 515b8b5e321a122e3cd23ae0716ec42dcb9eae5f Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 27 Feb 2018 18:04:25 +0100 Subject: [PATCH 119/273] mailmap: Update email address for Gregory CLEMENT Status: RO Content-Length: 767 Lines: 24 [ Upstream commit c535d632aecc6359d072374675a7787cbe71773b ] As now Free Electrons is Bootlin. Signed-off-by: Gregory CLEMENT Signed-off-by: Sasha Levin --- .mailmap | 1 + 1 file changed, 1 insertion(+) diff --git a/.mailmap b/.mailmap index b1e9a97653dc..e58b2599425e 100644 --- a/.mailmap +++ b/.mailmap @@ -50,6 +50,7 @@ Frank Zago Greg Kroah-Hartman Greg Kroah-Hartman Greg Kroah-Hartman +Gregory CLEMENT Henk Vergonet Henrik Kretzschmar Henrik Rydberg -- 2.17.0 >From e96e4eed4893f558e6a6885689dac8415dcf7997 Mon Sep 17 00:00:00 2001 From: Joonsoo Kim Date: Tue, 10 Apr 2018 16:30:23 -0700 Subject: [PATCH 152/273] ARM: CMA: avoid double mapping to the CMA area if CONFIG_HIGHMEM=y Status: RO Content-Length: 2995 Lines: 75 [ Upstream commit 3d2054ad8c2d5100b68b0c0405f89fd90bf4107b ] CMA area is now managed by the separate zone, ZONE_MOVABLE, to fix many MM related problems. In this implementation, if CONFIG_HIGHMEM = y, then ZONE_MOVABLE is considered as HIGHMEM and the memory of the CMA area is also considered as HIGHMEM. That means that they are considered as the page without direct mapping. However, CMA area could be in a lowmem and the memory could have direct mapping. In ARM, when establishing a new mapping for DMA, direct mapping should be cleared since two mapping with different cache policy could cause unknown problem. With this patch, PageHighmem() for the CMA memory located in lowmem returns true so that the function for DMA mapping cannot notice whether it needs to clear direct mapping or not, correctly. To handle this situation, this patch always clears direct mapping for such CMA memory. Link: http://lkml.kernel.org/r/1512114786-5085-4-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim Tested-by: Tony Lindgren Cc: "Aneesh Kumar K . V" Cc: Johannes Weiner Cc: Laura Abbott Cc: Marek Szyprowski Cc: Mel Gorman Cc: Michal Hocko Cc: Michal Nazarewicz Cc: Minchan Kim Cc: Rik van Riel Cc: Russell King Cc: Vlastimil Babka Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin --- arch/arm/mm/dma-mapping.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 613c1d06316a..23aacea5eb63 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -414,6 +414,12 @@ void __init dma_contiguous_early_fixup(phys_addr_t base, unsigned long size) void __init dma_contiguous_remap(void) { int i; + + if (!dma_mmu_remap_num) + return; + + /* call flush_cache_all() since CMA area would be large enough */ + flush_cache_all(); for (i = 0; i < dma_mmu_remap_num; i++) { phys_addr_t start = dma_mmu_remap[i].base; phys_addr_t end = start + dma_mmu_remap[i].size; @@ -446,7 +452,15 @@ void __init dma_contiguous_remap(void) flush_tlb_kernel_range(__phys_to_virt(start), __phys_to_virt(end)); - iotable_init(&map, 1); + /* + * All the memory in CMA region will be on ZONE_MOVABLE. + * If that zone is considered as highmem, the memory in CMA + * region is also considered as highmem even if it's + * physical address belong to lowmem. In this case, + * re-mapping isn't required. + */ + if (!is_highmem_idx(ZONE_MOVABLE)) + iotable_init(&map, 1); } } -- 2.17.0 >From dfc97d3477a5bd66c967f4855e14456b39647f8b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 26 Mar 2018 16:21:04 +0300 Subject: [PATCH 183/273] mac80211: don't WARN on bad WMM parameters from buggy APs Status: RO Content-Length: 1386 Lines: 38 [ Upstream commit c470bdc1aaf36669e04ba65faf1092b2d1c6cabe ] Apparently, some APs are buggy enough to send a zeroed WMM IE. Don't WARN on this since this is not caused by a bug on the client's system. This aligns the condition of the WARNING in drv_conf_tx with the validity check in ieee80211_sta_wmm_params. We will now pick the default values whenever we get a zeroed WMM IE. This has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=199161 Fixes: f409079bb678 ("mac80211: sanity check CW_min/CW_max towards driver") Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin --- net/mac80211/mlme.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 005cd8796505..67148ee2af68 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1833,7 +1833,8 @@ static bool ieee80211_sta_wmm_params(struct ieee80211_local *local, params[ac].acm = acm; params[ac].uapsd = uapsd; - if (params[ac].cw_min > params[ac].cw_max) { + if (params->cw_min == 0 || + params[ac].cw_min > params[ac].cw_max) { sdata_info(sdata, "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n", params[ac].cw_min, params[ac].cw_max, aci); -- 2.17.0 >From 93b939f348bf633d913988ed2954052ba897c0eb Mon Sep 17 00:00:00 2001 From: Sinan Kaya Date: Sun, 25 Mar 2018 10:39:19 -0400 Subject: [PATCH 193/273] net: qlge: Eliminate duplicate barriers on weakly-ordered archs Status: RO Content-Length: 2481 Lines: 62 [ Upstream commit e42d8cee343a545ac2d9557a3b28708bbca2bd31 ] Code includes wmb() followed by writel(). writel() already has a barrier on some architectures like arm64. This ends up CPU observing two barriers back to back before executing the register write. Create a new wrapper function with relaxed write operator. Use the new wrapper when a write is following a wmb(). Signed-off-by: Sinan Kaya Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/qlogic/qlge/qlge.h | 16 ++++++++++++++++ drivers/net/ethernet/qlogic/qlge/qlge_main.c | 3 ++- 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qlge/qlge.h b/drivers/net/ethernet/qlogic/qlge/qlge.h index ef332708e5f2..493a05158266 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge.h +++ b/drivers/net/ethernet/qlogic/qlge/qlge.h @@ -2184,6 +2184,22 @@ static inline void ql_write_db_reg(u32 val, void __iomem *addr) mmiowb(); } +/* + * Doorbell Registers: + * Doorbell registers are virtual registers in the PCI memory space. + * The space is allocated by the chip during PCI initialization. The + * device driver finds the doorbell address in BAR 3 in PCI config space. + * The registers are used to control outbound and inbound queues. For + * example, the producer index for an outbound queue. Each queue uses + * 1 4k chunk of memory. The lower half of the space is for outbound + * queues. The upper half is for inbound queues. + * Caller has to guarantee ordering. + */ +static inline void ql_write_db_reg_relaxed(u32 val, void __iomem *addr) +{ + writel_relaxed(val, addr); +} + /* * Shadow Registers: * Outbound queues have a consumer index that is maintained by the chip. diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index b28e73ea2c25..e1773a7fc33c 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -2704,7 +2704,8 @@ static netdev_tx_t qlge_send(struct sk_buff *skb, struct net_device *ndev) tx_ring->prod_idx = 0; wmb(); - ql_write_db_reg(tx_ring->prod_idx, tx_ring->prod_idx_db_reg); + ql_write_db_reg_relaxed(tx_ring->prod_idx, tx_ring->prod_idx_db_reg); + mmiowb(); netif_printk(qdev, tx_queued, KERN_DEBUG, qdev->ndev, "tx queued, slot %d, len %d\n", tx_ring->prod_idx, skb->len); -- 2.17.0 >From 9313e7724852ce53565546c230b119e47d1f681d Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 Mar 2018 13:54:40 +1100 Subject: [PATCH 211/273] powerpc/pseries: Make plpar_wrappers.h safe to include when PSERIES=n Status: RO Content-Length: 1087 Lines: 36 [ Upstream commit 5017e875e497c00dbc17558161fec3ff30b2b4a9 ] Currently plpar_wrappers.h is not safe to include when CONFIG_PPC_PSERIES=n, or at least it can be depending on other config options and so on. Fix that by wrapping the entire content in an ifdef. Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin --- arch/powerpc/include/asm/plpar_wrappers.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/include/asm/plpar_wrappers.h b/arch/powerpc/include/asm/plpar_wrappers.h index 6e05cb397a5c..a6422afcc6f2 100644 --- a/arch/powerpc/include/asm/plpar_wrappers.h +++ b/arch/powerpc/include/asm/plpar_wrappers.h @@ -1,6 +1,8 @@ #ifndef _ASM_POWERPC_PLPAR_WRAPPERS_H #define _ASM_POWERPC_PLPAR_WRAPPERS_H +#ifdef CONFIG_PPC_PSERIES + #include #include @@ -337,4 +339,6 @@ static inline long plpar_get_cpu_characteristics(struct h_cpu_char_result *p) return rc; } +#endif /* CONFIG_PPC_PSERIES */ + #endif /* _ASM_POWERPC_PLPAR_WRAPPERS_H */ -- 2.17.0 >From a825137e6f447202567386e0f1e54eb68e1e2b01 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 13 Feb 2018 08:44:06 -0800 Subject: [PATCH 264/273] selftests: Add FIB onlink tests Status: RO Content-Length: 10200 Lines: 396 [ Upstream commit 153e1b84f477f716bc3f81e6cfae1a3d941fc7ec ] Add test cases verifying FIB onlink commands work as expected in various conditions - IPv4, IPv6, main table, and VRF. Signed-off-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- .../testing/selftests/net/fib-onlink-tests.sh | 375 ++++++++++++++++++ 1 file changed, 375 insertions(+) create mode 100755 tools/testing/selftests/net/fib-onlink-tests.sh diff --git a/tools/testing/selftests/net/fib-onlink-tests.sh b/tools/testing/selftests/net/fib-onlink-tests.sh new file mode 100755 index 000000000000..06b1d7cc12cc --- /dev/null +++ b/tools/testing/selftests/net/fib-onlink-tests.sh @@ -0,0 +1,375 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# IPv4 and IPv6 onlink tests + +PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} + +# Network interfaces +# - odd in current namespace; even in peer ns +declare -A NETIFS +# default VRF +NETIFS[p1]=veth1 +NETIFS[p2]=veth2 +NETIFS[p3]=veth3 +NETIFS[p4]=veth4 +# VRF +NETIFS[p5]=veth5 +NETIFS[p6]=veth6 +NETIFS[p7]=veth7 +NETIFS[p8]=veth8 + +# /24 network +declare -A V4ADDRS +V4ADDRS[p1]=169.254.1.1 +V4ADDRS[p2]=169.254.1.2 +V4ADDRS[p3]=169.254.3.1 +V4ADDRS[p4]=169.254.3.2 +V4ADDRS[p5]=169.254.5.1 +V4ADDRS[p6]=169.254.5.2 +V4ADDRS[p7]=169.254.7.1 +V4ADDRS[p8]=169.254.7.2 + +# /64 network +declare -A V6ADDRS +V6ADDRS[p1]=2001:db8:101::1 +V6ADDRS[p2]=2001:db8:101::2 +V6ADDRS[p3]=2001:db8:301::1 +V6ADDRS[p4]=2001:db8:301::2 +V6ADDRS[p5]=2001:db8:501::1 +V6ADDRS[p6]=2001:db8:501::2 +V6ADDRS[p7]=2001:db8:701::1 +V6ADDRS[p8]=2001:db8:701::2 + +# Test networks: +# [1] = default table +# [2] = VRF +# +# /32 host routes +declare -A TEST_NET4 +TEST_NET4[1]=169.254.101 +TEST_NET4[2]=169.254.102 +# /128 host routes +declare -A TEST_NET6 +TEST_NET6[1]=2001:db8:101 +TEST_NET6[2]=2001:db8:102 + +# connected gateway +CONGW[1]=169.254.1.254 +CONGW[2]=169.254.5.254 + +# recursive gateway +RECGW4[1]=169.254.11.254 +RECGW4[2]=169.254.12.254 +RECGW6[1]=2001:db8:11::64 +RECGW6[2]=2001:db8:12::64 + +# for v4 mapped to v6 +declare -A TEST_NET4IN6IN6 +TEST_NET4IN6[1]=10.1.1.254 +TEST_NET4IN6[2]=10.2.1.254 + +# mcast address +MCAST6=ff02::1 + + +PEER_NS=bart +PEER_CMD="ip netns exec ${PEER_NS}" +VRF=lisa +VRF_TABLE=1101 +PBR_TABLE=101 + +################################################################################ +# utilities + +log_test() +{ + local rc=$1 + local expected=$2 + local msg="$3" + + if [ ${rc} -eq ${expected} ]; then + nsuccess=$((nsuccess+1)) + printf "\n TEST: %-50s [ OK ]\n" "${msg}" + else + nfail=$((nfail+1)) + printf "\n TEST: %-50s [FAIL]\n" "${msg}" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + fi +} + +log_section() +{ + echo + echo "######################################################################" + echo "TEST SECTION: $*" + echo "######################################################################" +} + +log_subsection() +{ + echo + echo "#########################################" + echo "TEST SUBSECTION: $*" +} + +run_cmd() +{ + echo + echo "COMMAND: $*" + eval $* +} + +get_linklocal() +{ + local dev=$1 + local pfx + local addr + + addr=$(${pfx} ip -6 -br addr show dev ${dev} | \ + awk '{ + for (i = 3; i <= NF; ++i) { + if ($i ~ /^fe80/) + print $i + } + }' + ) + addr=${addr/\/*} + + [ -z "$addr" ] && return 1 + + echo $addr + + return 0 +} + +################################################################################ +# + +setup() +{ + echo + echo "########################################" + echo "Configuring interfaces" + + set -e + + # create namespace + ip netns add ${PEER_NS} + ip -netns ${PEER_NS} li set lo up + + # add vrf table + ip li add ${VRF} type vrf table ${VRF_TABLE} + ip li set ${VRF} up + ip ro add table ${VRF_TABLE} unreachable default + ip -6 ro add table ${VRF_TABLE} unreachable default + + # create test interfaces + ip li add ${NETIFS[p1]} type veth peer name ${NETIFS[p2]} + ip li add ${NETIFS[p3]} type veth peer name ${NETIFS[p4]} + ip li add ${NETIFS[p5]} type veth peer name ${NETIFS[p6]} + ip li add ${NETIFS[p7]} type veth peer name ${NETIFS[p8]} + + # enslave vrf interfaces + for n in 5 7; do + ip li set ${NETIFS[p${n}]} vrf ${VRF} + done + + # add addresses + for n in 1 3 5 7; do + ip li set ${NETIFS[p${n}]} up + ip addr add ${V4ADDRS[p${n}]}/24 dev ${NETIFS[p${n}]} + ip addr add ${V6ADDRS[p${n}]}/64 dev ${NETIFS[p${n}]} + done + + # move peer interfaces to namespace and add addresses + for n in 2 4 6 8; do + ip li set ${NETIFS[p${n}]} netns ${PEER_NS} up + ip -netns ${PEER_NS} addr add ${V4ADDRS[p${n}]}/24 dev ${NETIFS[p${n}]} + ip -netns ${PEER_NS} addr add ${V6ADDRS[p${n}]}/64 dev ${NETIFS[p${n}]} + done + + set +e + + # let DAD complete - assume default of 1 probe + sleep 1 +} + +cleanup() +{ + # make sure we start from a clean slate + ip netns del ${PEER_NS} 2>/dev/null + for n in 1 3 5 7; do + ip link del ${NETIFS[p${n}]} 2>/dev/null + done + ip link del ${VRF} 2>/dev/null + ip ro flush table ${VRF_TABLE} + ip -6 ro flush table ${VRF_TABLE} +} + +################################################################################ +# IPv4 tests +# + +run_ip() +{ + local table="$1" + local prefix="$2" + local gw="$3" + local dev="$4" + local exp_rc="$5" + local desc="$6" + + # dev arg may be empty + [ -n "${dev}" ] && dev="dev ${dev}" + + run_cmd ip ro add table "${table}" "${prefix}"/32 via "${gw}" "${dev}" onlink + log_test $? ${exp_rc} "${desc}" +} + +valid_onlink_ipv4() +{ + # - unicast connected, unicast recursive + # + log_subsection "default VRF - main table" + + run_ip 254 ${TEST_NET4[1]}.1 ${CONGW[1]} ${NETIFS[p1]} 0 "unicast connected" + run_ip 254 ${TEST_NET4[1]}.2 ${RECGW4[1]} ${NETIFS[p1]} 0 "unicast recursive" + + log_subsection "VRF ${VRF}" + + run_ip ${VRF_TABLE} ${TEST_NET4[2]}.1 ${CONGW[2]} ${NETIFS[p5]} 0 "unicast connected" + run_ip ${VRF_TABLE} ${TEST_NET4[2]}.2 ${RECGW4[2]} ${NETIFS[p5]} 0 "unicast recursive" + + log_subsection "VRF device, PBR table" + + run_ip ${PBR_TABLE} ${TEST_NET4[2]}.3 ${CONGW[2]} ${NETIFS[p5]} 0 "unicast connected" + run_ip ${PBR_TABLE} ${TEST_NET4[2]}.4 ${RECGW4[2]} ${NETIFS[p5]} 0 "unicast recursive" +} + +invalid_onlink_ipv4() +{ + run_ip 254 ${TEST_NET4[1]}.11 ${V4ADDRS[p1]} ${NETIFS[p1]} 2 \ + "Invalid gw - local unicast address" + + run_ip ${VRF_TABLE} ${TEST_NET4[2]}.11 ${V4ADDRS[p5]} ${NETIFS[p5]} 2 \ + "Invalid gw - local unicast address, VRF" + + run_ip 254 ${TEST_NET4[1]}.101 ${V4ADDRS[p1]} "" 2 "No nexthop device given" + + run_ip 254 ${TEST_NET4[1]}.102 ${V4ADDRS[p3]} ${NETIFS[p1]} 2 \ + "Gateway resolves to wrong nexthop device" + + run_ip ${VRF_TABLE} ${TEST_NET4[2]}.103 ${V4ADDRS[p7]} ${NETIFS[p5]} 2 \ + "Gateway resolves to wrong nexthop device - VRF" +} + +################################################################################ +# IPv6 tests +# + +run_ip6() +{ + local table="$1" + local prefix="$2" + local gw="$3" + local dev="$4" + local exp_rc="$5" + local desc="$6" + + # dev arg may be empty + [ -n "${dev}" ] && dev="dev ${dev}" + + run_cmd ip -6 ro add table "${table}" "${prefix}"/128 via "${gw}" "${dev}" onlink + log_test $? ${exp_rc} "${desc}" +} + +valid_onlink_ipv6() +{ + # - unicast connected, unicast recursive, v4-mapped + # + log_subsection "default VRF - main table" + + run_ip6 254 ${TEST_NET6[1]}::1 ${V6ADDRS[p1]/::*}::64 ${NETIFS[p1]} 0 "unicast connected" + run_ip6 254 ${TEST_NET6[1]}::2 ${RECGW6[1]} ${NETIFS[p1]} 0 "unicast recursive" + run_ip6 254 ${TEST_NET6[1]}::3 ::ffff:${TEST_NET4IN6[1]} ${NETIFS[p1]} 0 "v4-mapped" + + log_subsection "VRF ${VRF}" + + run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::1 ${V6ADDRS[p5]/::*}::64 ${NETIFS[p5]} 0 "unicast connected" + run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::2 ${RECGW6[2]} ${NETIFS[p5]} 0 "unicast recursive" + run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::3 ::ffff:${TEST_NET4IN6[2]} ${NETIFS[p5]} 0 "v4-mapped" + + log_subsection "VRF device, PBR table" + + run_ip6 ${PBR_TABLE} ${TEST_NET6[2]}::4 ${V6ADDRS[p5]/::*}::64 ${NETIFS[p5]} 0 "unicast connected" + run_ip6 ${PBR_TABLE} ${TEST_NET6[2]}::5 ${RECGW6[2]} ${NETIFS[p5]} 0 "unicast recursive" + run_ip6 ${PBR_TABLE} ${TEST_NET6[2]}::6 ::ffff:${TEST_NET4IN6[2]} ${NETIFS[p5]} 0 "v4-mapped" +} + +invalid_onlink_ipv6() +{ + local lladdr + + lladdr=$(get_linklocal ${NETIFS[p1]}) || return 1 + + run_ip6 254 ${TEST_NET6[1]}::11 ${V6ADDRS[p1]} ${NETIFS[p1]} 2 \ + "Invalid gw - local unicast address" + run_ip6 254 ${TEST_NET6[1]}::12 ${lladdr} ${NETIFS[p1]} 2 \ + "Invalid gw - local linklocal address" + run_ip6 254 ${TEST_NET6[1]}::12 ${MCAST6} ${NETIFS[p1]} 2 \ + "Invalid gw - multicast address" + + lladdr=$(get_linklocal ${NETIFS[p5]}) || return 1 + run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::11 ${V6ADDRS[p5]} ${NETIFS[p5]} 2 \ + "Invalid gw - local unicast address, VRF" + run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::12 ${lladdr} ${NETIFS[p5]} 2 \ + "Invalid gw - local linklocal address, VRF" + run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::12 ${MCAST6} ${NETIFS[p5]} 2 \ + "Invalid gw - multicast address, VRF" + + run_ip6 254 ${TEST_NET6[1]}::101 ${V6ADDRS[p1]} "" 2 \ + "No nexthop device given" + + # default VRF validation is done against LOCAL table + # run_ip6 254 ${TEST_NET6[1]}::102 ${V6ADDRS[p3]/::[0-9]/::64} ${NETIFS[p1]} 2 \ + # "Gateway resolves to wrong nexthop device" + + run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::103 ${V6ADDRS[p7]/::[0-9]/::64} ${NETIFS[p5]} 2 \ + "Gateway resolves to wrong nexthop device - VRF" +} + +run_onlink_tests() +{ + log_section "IPv4 onlink" + log_subsection "Valid onlink commands" + valid_onlink_ipv4 + log_subsection "Invalid onlink commands" + invalid_onlink_ipv4 + + log_section "IPv6 onlink" + log_subsection "Valid onlink commands" + valid_onlink_ipv6 + invalid_onlink_ipv6 +} + +################################################################################ +# main + +nsuccess=0 +nfail=0 + +cleanup +setup +run_onlink_tests +cleanup + +if [ "$TESTS" != "none" ]; then + printf "\nTests passed: %3d\n" ${nsuccess} + printf "Tests failed: %3d\n" ${nfail} +fi -- 2.17.0 >From 160e08c0114cb402f9af80583b3a25863d184217 Mon Sep 17 00:00:00 2001 From: David Lechner Date: Mon, 15 Jan 2018 11:29:31 -0600 Subject: [PATCH 249/273] ARM: davinci_all_defconfig: set CONFIG_DAVINCI_WATCHDOG=y Status: RO Content-Length: 1254 Lines: 33 [ Upstream commit 35ba26772c827dbfc03be8adc3af8ff0d294b38f ] This changes CONFIG_DAVINCI_WATCHDOG from a module to a compiled-in option. Since the reset function has been moved out of the mach code in commit 94f2e94514e5 ("ARM: davinci: remove watchdog reset") and into the watchdog driver, devices cannot reboot unless the watchdog driver is loaded, so make it a compiled-in option so that we can always reboot, even when modules are not loaded. Cc: Sekhar Nori Suggested-by: Adam Ford Signed-off-by: David Lechner Signed-off-by: Sekhar Nori Signed-off-by: Sasha Levin --- arch/arm/configs/davinci_all_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 235842c9ba96..01e48356b63e 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -120,7 +120,7 @@ CONFIG_I2C_DAVINCI=y CONFIG_PINCTRL_SINGLE=y CONFIG_GPIO_PCF857X=y CONFIG_WATCHDOG=y -CONFIG_DAVINCI_WATCHDOG=m +CONFIG_DAVINCI_WATCHDOG=y CONFIG_MFD_DM355EVM_MSP=y CONFIG_TPS6507X=y CONFIG_VIDEO_OUTPUT_CONTROL=m -- 2.17.0 >From 7aae89e8cdedee66b6bd4e4d254d707cd70cdc45 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Sun, 28 Jan 2018 16:59:48 -0800 Subject: [PATCH 402/405] pinctrl: msm: Use dynamic GPIO numbering Status: RO Content-Length: 1053 Lines: 30 [ Upstream commit a7aa75a2a7dba32594291a71c3704000a2fd7089 ] The base of the TLMM gpiochip should not be statically defined as 0, fix this to not artificially restrict the existence of multiple pinctrl-msm devices. Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver") Reported-by: Timur Tabi Signed-off-by: Bjorn Andersson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin --- drivers/pinctrl/qcom/pinctrl-msm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c index bedce3453dd3..056845bdf67b 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.c +++ b/drivers/pinctrl/qcom/pinctrl-msm.c @@ -790,7 +790,7 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl) return -EINVAL; chip = &pctrl->chip; - chip->base = 0; + chip->base = -1; chip->ngpio = ngpio; chip->label = dev_name(pctrl->dev); chip->parent = pctrl->dev; -- 2.17.0