From: Niklas Cassel niklas.cassel@wdc.com
Commit 67d96729a9e7 ("riscv: Update Canaan Kendryte K210 device tree") incorrectly removed two entries from the PLIC interrupt-controller node's interrupts-extended property.
The PLIC driver cannot know the mapping between hart contexts and hart ids, so this information has to be provided by device tree, as specified by the PLIC device tree binding.
The PLIC driver uses the interrupts-extended property, and initializes the hart context registers in the exact same order as provided by the interrupts-extended property.
In other words, if we don't specify the S-mode interrupts, the PLIC driver will simply initialize the hart0 S-mode hart context with the hart1 M-mode configuration. It is therefore essential to specify the S-mode IRQs even though the system itself will only ever be running in M-mode.
Re-add the S-mode interrupts, so that we get working IRQs on hart1 again.
Cc: stable@vger.kernel.org Fixes: 67d96729a9e7 ("riscv: Update Canaan Kendryte K210 device tree") Signed-off-by: Niklas Cassel niklas.cassel@wdc.com --- arch/riscv/boot/dts/canaan/k210.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi index 56f57118c633..44d338514761 100644 --- a/arch/riscv/boot/dts/canaan/k210.dtsi +++ b/arch/riscv/boot/dts/canaan/k210.dtsi @@ -113,7 +113,8 @@ plic0: interrupt-controller@c000000 { compatible = "canaan,k210-plic", "sifive,plic-1.0.0"; reg = <0xC000000 0x4000000>; interrupt-controller; - interrupts-extended = <&cpu0_intc 11>, <&cpu1_intc 11>; + interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>, + <&cpu1_intc 11>, <&cpu1_intc 9>; riscv,ndev = <65>; };