From: Tony Lindgren tony@atomide.com
[ Upstream commit 2d3c8ba3cffa00f76bedb713c8c2126c82d8cd13 ]
The ahclkr clkctrl clock bit 28 only exists for mcasp 1 and 2 on dra7. This causes the following warning on beagle-x15:
ti-sysc 48468000.target-module: could not add child clock ahclkr: -19
Also the mcasp clkctrl clock bits are wrong:
For mcasp1 and 2 we have four clocks at bits 28, 24, 22 and 0:
bit 28 is ahclkr bit 24 is ahclkx bit 22 is auxclk bit 0 is fck
For mcasp3 to 8 we have three clocks at bits 24, 22 and 0.
bit 24 is ahclkx bit 22 is auxclk bit 0 is fck
We do not have currently mapped auxclk at bit 22 for the drivers, that can be added if needed.
Fixes: 5241ccbf2819 ("ARM: dts: Add missing ranges for dra7 mcasp l3 ports") Cc: Suman Anna s-anna@ti.com Cc: Tero Kristo t-kristo@ti.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/dra7-l4.dtsi | 48 +++++++++++++++------------------- 1 file changed, 21 insertions(+), 27 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 21e5914fdd620..099d6fe2a57ad 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -2762,7 +2762,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>; dma-names = "tx", "rx"; - clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 22>, + clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; @@ -2799,8 +2799,8 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 22>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>, + <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; status = "disabled"; @@ -2818,9 +2818,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x68000 0x2000>, @@ -2836,7 +2835,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2854,9 +2853,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x6c000 0x2000>, @@ -2872,7 +2870,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2890,9 +2888,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x70000 0x2000>, @@ -2908,7 +2905,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2926,9 +2923,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x74000 0x2000>, @@ -2944,7 +2940,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2962,9 +2958,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x78000 0x2000>, @@ -2980,7 +2975,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2998,9 +2993,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x7c000 0x2000>, @@ -3016,7 +3010,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled";