On Wed, Nov 13, 2019 at 11:14:05AM +0100, Aleksander Morgado wrote:
These are the Foxconn-branded variants of the Dell DW5821e modules, same USB layout as those. The device exposes AT, NMEA and DIAG ports in both USB configurations.
P: Vendor=0489 ProdID=e0b4 Rev=03.18 S: Manufacturer=FII S: Product=T77W968 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
P: Vendor=0489 ProdID=e0b4 Rev=03.18 S: Manufacturer=FII S: Product=T77W968 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
Signed-off-by: Aleksander Morgado aleksander@aleksander.es
drivers/usb/serial/option.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2023f1f4edaf..787f004f24fc 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -555,6 +555,11 @@ static void option_instat_callback(struct urb *urb); #define WETELECOM_PRODUCT_6802 0x6802 #define WETELECOM_PRODUCT_WMD300 0x6803 +/* Foxconn products */ +#define FOXCONN_VENDOR_ID 0x0489 +#define FOXCONN_PRODUCT_T77W968 0xe0b4 +#define FOXCONN_PRODUCT_T77W968_ESIM 0xe0b5
I dropped these new defines in favour of using numerical constants before applying:
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2023f1f4edaf..e9491d400a24 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1993,6 +1993,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x13) }, { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x14) }, { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) }, + { USB_DEVICE(0x0489, 0xe0b4), /* Foxconn T77W968 */ + .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, + { USB_DEVICE(0x0489, 0xe0b5), /* Foxconn T77W968 ESIM */ + .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 */ .driver_info = RSVD(4) | RSVD(5) | RSVD(6) }, { USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */
/* Device flags */ @@ -1999,6 +2004,10 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(4) | RSVD(5) }, { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */ .driver_info = RSVD(6) },
- { USB_DEVICE(FOXCONN_VENDOR_ID, FOXCONN_PRODUCT_T77W968),
.driver_info = RSVD(0) | RSVD(1) | RSVD(6) },- { USB_DEVICE(FOXCONN_VENDOR_ID, FOXCONN_PRODUCT_T77W968_ESIM),
.driver_info = RSVD(0) | RSVD(1) | RSVD(6) },}; MODULE_DEVICE_TABLE(usb, option_ids);
I'm trying to avoid adding new defines, but sometimes make exceptions when when we already have related entries in place.
Thanks, Johan