From: Cameron Nemo cnemo@tutanota.com
commit bbac8bd65f5402281cb7b0452c1c5f367387b459 upstream
Enable USB3 nodes for the rk3328-based PINE Rock64 board.
The separate power regulator is not added as it is controlled by the same GPIO line as the existing VBUS regulators, so it is already enabled. Also there is no port representation to tie the regulator to.
[wens@csie.org: Rebased onto v5.12]
Signed-off-by: Cameron Nemo cnemo@tutanota.com [wens@csie.org: Rewrote commit message] Signed-off-by: Chen-Yu Tsai wens@csie.org Link: https://lore.kernel.org/r/20210504083616.9654-2-wens@kernel.org Signed-off-by: Heiko Stuebner heiko@sntech.de --- arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 86cfb5c50a94..95ab6928cfd4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -384,6 +384,11 @@ &usb20_otg { status = "okay"; };
+&usbdrd3 { + dr_mode = "host"; + status = "okay"; +}; + &usb_host0_ehci { status = "okay"; };