From: Michał Mirosław mirq-linux@rere.qmqm.pl
commit 53dd0a7cd65edc83b0c243d1c08377c8b876b2ee upstream.
SAMA5D2x doesn't drive CMD line if GPIO is used as CD line (at least SAMA5D27 doesn't). Fix this by forcing card-detect in the module if module-controlled CD is not used.
Fixed commit addresses the problem only for non-removable cards. This amends it to also cover gpio-cd case.
Cc: stable@vger.kernel.org Fixes: 7a1e3f143176 ("mmc: sdhci-of-at91: force card detect value for non removable devices") Signed-off-by: Michał Mirosław mirq-linux@rere.qmqm.pl Acked-by: Adrian Hunter adrian.hunter@intel.com Link: https://lore.kernel.org/r/8d10950d9940468577daef4772b82a071b204716.158429056... Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/mmc/host/sdhci-of-at91.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -125,7 +125,8 @@ static void sdhci_at91_reset(struct sdhc { sdhci_reset(host, mask);
- if (host->mmc->caps & MMC_CAP_NONREMOVABLE) + if ((host->mmc->caps & MMC_CAP_NONREMOVABLE) + || mmc_gpio_get_cd(host->mmc) >= 0) sdhci_at91_set_force_card_detect(host); }
@@ -404,8 +405,11 @@ static int sdhci_at91_probe(struct platf * detection procedure using the SDMCC_CD signal is bypassed. * This bit is reset when a software reset for all command is performed * so we need to implement our own reset function to set back this bit. + * + * WA: SAMA5D2 doesn't drive CMD if using CD GPIO line. */ - if (host->mmc->caps & MMC_CAP_NONREMOVABLE) + if ((host->mmc->caps & MMC_CAP_NONREMOVABLE) + || mmc_gpio_get_cd(host->mmc) >= 0) sdhci_at91_set_force_card_detect(host);
pm_runtime_put_autosuspend(&pdev->dev);