In the original code, the device reset would not be triggered when the driver is set to multi-master and bus is free. It needs to be considered with multi-master condition.
Fixes: <f327c686d3ba> ("i2c: aspeed: Reset the i2c controller when timeout occurs")
Signed-off-by: Tommy Huang tommy_huang@aspeedtech.com --- drivers/i2c/busses/i2c-aspeed.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index cc5a26637fd5..7639ae3ace67 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -716,14 +716,15 @@ static int aspeed_i2c_master_xfer(struct i2c_adapter *adap, if (time_left == 0) { /* * In a multi-master setup, if a timeout occurs, attempt - * recovery. But if the bus is idle, we still need to reset the - * i2c controller to clear the remaining interrupts. + * recovery device. But if the bus is idle, + * we still need to reset the i2c controller to clear + * the remaining interrupts or reset device abnormal condition. */ - if (bus->multi_master && - (readl(bus->base + ASPEED_I2C_CMD_REG) & - ASPEED_I2CD_BUS_BUSY_STS)) - aspeed_i2c_recover_bus(bus); - else + if ((readl(bus->base + ASPEED_I2C_CMD_REG) & + ASPEED_I2CD_BUS_BUSY_STS)){ + if (bus->multi_master) + aspeed_i2c_recover_bus(bus); + } else aspeed_i2c_reset(bus);
/*