From: Andrew Lunn andrew@lunn.ch
[ Upstream commit d8dc2c9676e614ef62f54a155b50076888c8a29a ]
The 6390 family uses an extended register to set the port connected to the CPU. The lower 5 bits indicate the port, the upper three bits are the priority of the frames as they pass through the switch, what egress queue they should use, etc. Since frames being set to the CPU are typically management frames, BPDU, IGMP, ARP, etc set the priority to 7, the reset default, and the highest.
Fixes: 33641994a676 ("net: dsa: mv88e6xxx: Monitor and Management tables") Signed-off-by: Andrew Lunn andrew@lunn.ch Tested-by: Chris Healy cphealy@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/dsa/mv88e6xxx/global1.c | 5 +++++ drivers/net/dsa/mv88e6xxx/global1.h | 1 + 2 files changed, 6 insertions(+)
--- a/drivers/net/dsa/mv88e6xxx/global1.c +++ b/drivers/net/dsa/mv88e6xxx/global1.c @@ -371,6 +371,11 @@ int mv88e6390_g1_set_cpu_port(struct mv8 { u16 ptr = MV88E6390_G1_MONITOR_MGMT_CTL_PTR_CPU_DEST;
+ /* Use the default high priority for management frames sent to + * the CPU. + */ + port |= MV88E6390_G1_MONITOR_MGMT_CTL_PTR_CPU_DEST_MGMTPRI; + return mv88e6390_g1_monitor_write(chip, ptr, port); }
--- a/drivers/net/dsa/mv88e6xxx/global1.h +++ b/drivers/net/dsa/mv88e6xxx/global1.h @@ -197,6 +197,7 @@ #define MV88E6390_G1_MONITOR_MGMT_CTL_PTR_INGRESS_DEST 0x2000 #define MV88E6390_G1_MONITOR_MGMT_CTL_PTR_EGRESS_DEST 0x2100 #define MV88E6390_G1_MONITOR_MGMT_CTL_PTR_CPU_DEST 0x3000 +#define MV88E6390_G1_MONITOR_MGMT_CTL_PTR_CPU_DEST_MGMTPRI 0x00e0 #define MV88E6390_G1_MONITOR_MGMT_CTL_DATA_MASK 0x00ff
/* Offset 0x1C: Global Control 2 */