[ Upstream commit cc839d0f8c284fcb7591780b568f13415bbb737c ]
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb" clock to determine if it needs to configure the IP block as operating at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both clocks as IMX6SL_CLK_SDMA results in driver incorrectly thinking that ratio is 1:1 which results in broken SDMA funtionality. Fix the code to specify IMX6SL_CLK_AHB as "ahb" clock for SDMA, to avoid detecting incorrect clock ratio.
Signed-off-by: Andrey Smirnov andrew.smirnov@gmail.com Cc: Angus Ainslie (Purism) angus@akkea.ca Cc: Chris Healy cphealy@gmail.com Cc: Lucas Stach l.stach@pengutronix.de Cc: Fabio Estevam fabio.estevam@nxp.com Cc: Shawn Guo shawnguo@kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/imx6sl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 7a4f5dace902..2fa88c6f1882 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -739,7 +739,7 @@ reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_SDMA>, - <&clks IMX6SL_CLK_SDMA>; + <&clks IMX6SL_CLK_AHB>; clock-names = "ipg", "ahb"; #dma-cells = <3>; /* imx6sl reuses imx6q sdma firmware */