commit 54309fde1a352ad2674ebba004a79f7d20b9f037 upstream.
On reads with MMC_READ_MULTIPLE_BLOCK that fail, the recovery handler will use MMC_READ_SINGLE_BLOCK for each of the blocks, up to MMC_READ_SINGLE_RETRIES times each. The logic for this is fixed to never report unsuccessful reads as success to the block layer.
On command error with retries remaining, blk_update_request was called with whatever value error was set last to. In case it was last set to BLK_STS_OK (default), the read will be reported as success, even though there was no data read from the device. This could happen on a CRC mismatch for the response, a card rejecting the command (e.g. again due to a CRC mismatch). In case it was last set to BLK_STS_IOERR, the error is reported correctly, but no retries will be attempted.
Fixes: 81196976ed946c ("mmc: block: Add blk-mq support")
Signed-off-by: Christian Loehle cloehle@hyperstone.com --- drivers/mmc/core/block.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index d1cc0fdbc51c..630f3bcba56d 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -1678,31 +1678,31 @@ static void mmc_blk_read_single(struct mmc_queue *mq, struct request *req) struct mmc_card *card = mq->card; struct mmc_host *host = card->host; blk_status_t error = BLK_STS_OK; - int retries = 0;
do { u32 status; int err; + int retries = 0;
- mmc_blk_rw_rq_prep(mqrq, card, 1, mq); + while (retries++ <= MMC_READ_SINGLE_RETRIES) { + mmc_blk_rw_rq_prep(mqrq, card, 1, mq);
- mmc_wait_for_req(host, mrq); + mmc_wait_for_req(host, mrq);
- err = mmc_send_status(card, &status); - if (err) - goto error_exit; - - if (!mmc_host_is_spi(host) && - !mmc_blk_in_tran_state(status)) { - err = mmc_blk_fix_state(card, req); + err = mmc_send_status(card, &status); if (err) goto error_exit; - }
- if (mrq->cmd->error && retries++ < MMC_READ_SINGLE_RETRIES) - continue; + if (!mmc_host_is_spi(host) && + !mmc_blk_in_tran_state(status)) { + err = mmc_blk_fix_state(card, req); + if (err) + goto error_exit; + }
- retries = 0; + if (!mrq->cmd->error) + break; + }
if (mrq->cmd->error || mrq->data->error ||