6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mika Westerberg mika.westerberg@linux.intel.com
commit c82458101d5490230d735caecce14c9c27b1010c upstream.
Mark Blakeney reported that when suspending system with a Thunderbolt dock connected and then unplugging the dock before resume (which is pretty normal flow with laptops), resuming takes long time.
What happens is that the PCIe link from the root port to the PCIe switch inside the Thunderbolt device does not train (as expected, the link is unplugged):
pcieport 0000:00:07.2: restoring config space at offset 0x24 (was 0x3bf12001, writing 0x3bf12001) pcieport 0000:00:07.0: waiting 100 ms for downstream link pcieport 0000:01:00.0: not ready 1023ms after resume; giving up
However, at this point we still try to resume the devices below that unplugged link:
pcieport 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible ... pcieport 0000:01:00.0: restoring config space at offset 0x38 (was 0xffffffff, writing 0x0) ... pcieport 0000:02:02.0: waiting 100 ms for downstream link, after activation
And this is the link from PCIe switch downstream port to the xHCI on the dock:
xhci_hcd 0000:03:00.0: not ready 65535ms after resume; giving up xhci_hcd 0000:03:00.0: Unable to change power state from D3cold to D0, device inaccessible xhci_hcd 0000:03:00.0: restoring config space at offset 0x3c (was 0xffffffff, writing 0x1ff)
This ends up slowing down the resume time considerably. For this reason mark these devices as disconnected if the link above them did not train properly.
Fixes: e8b908146d44 ("PCI/PM: Increase wait time after resume") Link: https://lore.kernel.org/r/20230918053041.1018876-1-mika.westerberg@linux.int... Reported-by: Mark Blakeney mark.blakeney@bullet-systems.net Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217915 Signed-off-by: Mika Westerberg mika.westerberg@linux.intel.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Lukas Wunner lukas@wunner.de Cc: stable@vger.kernel.org # v6.4+ Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/pci-driver.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
--- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -579,7 +579,19 @@ static void pci_pm_default_resume_early(
static void pci_pm_bridge_power_up_actions(struct pci_dev *pci_dev) { - pci_bridge_wait_for_secondary_bus(pci_dev, "resume"); + int ret; + + ret = pci_bridge_wait_for_secondary_bus(pci_dev, "resume"); + if (ret) { + /* + * The downstream link failed to come up, so mark the + * devices below as disconnected to make sure we don't + * attempt to resume them. + */ + pci_walk_bus(pci_dev->subordinate, pci_dev_set_disconnected, + NULL); + return; + }
/* * When powering on a bridge from D3cold, the whole hierarchy may be