6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wojciech Dubowik Wojciech.Dubowik@mt.com
commit 5591ce0069ddda97cdbbea596bed53e698f399c2 upstream.
Define vqmmc regulator-gpio for usdhc2 with vin-supply coming from LDO5.
Without this definition LDO5 will be powered down, disabling SD card after bootup. This has been introduced in commit f5aab0438ef1 ("regulator: pca9450: Fix enable register for LDO5").
Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini") Fixes: f5aab0438ef1 ("regulator: pca9450: Fix enable register for LDO5") Tested-by: Manuel Traut manuel.traut@mt.com Reviewed-by: Philippe Schenker philippe.schenker@impulsing.ch Tested-by: Francesco Dolcini francesco.dolcini@toradex.com Reviewed-by: Francesco Dolcini francesco.dolcini@toradex.com Cc: stable@vger.kernel.org Signed-off-by: Wojciech Dubowik Wojciech.Dubowik@mt.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 25 ++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-)
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -148,6 +148,19 @@ startup-delay-us = <20000>; };
+ reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_vsel>; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + states = <1800000 0x1>, + <3300000 0x0>; + regulator-name = "PMIC_USDHC_VSELECT"; + vin-supply = <®_nvcc_sd>; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -266,7 +279,7 @@ "SODIMM_19", "", "", - "", + "PMIC_USDHC_VSELECT", "", "", "", @@ -787,6 +800,7 @@ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>; vmmc-supply = <®_usdhc2_vmmc>; + vqmmc-supply = <®_usdhc2_vqmmc>; };
&wdog1 { @@ -1209,13 +1223,17 @@ <MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x6>; /* SODIMM 76 */ };
+ pinctrl_usdhc2_vsel: usdhc2vselgrp { + fsl,pins = + <MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x10>; /* PMIC_USDHC_VSELECT */ + }; + /* * Note: Due to ERR050080 we use discrete external on-module resistors pulling-up to the * on-module +V3.3_1.8_SD (LDO5) rail and explicitly disable the internal pull-ups here. */ pinctrl_usdhc2: usdhc2grp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x10>, <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x90>, /* SODIMM 78 */ <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x90>, /* SODIMM 74 */ <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x90>, /* SODIMM 80 */ @@ -1226,7 +1244,6 @@
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x10>, <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x94>, <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x94>, <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x94>, @@ -1237,7 +1254,6 @@
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x10>, <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x96>, <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x96>, <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x96>, @@ -1249,7 +1265,6 @@ /* Avoid backfeeding with removed card power */ pinctrl_usdhc2_sleep: usdhc2slpgrp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x0>, <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x0>, <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x0>, <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0>,