From: Kai-Heng Feng kai.heng.feng@canonical.com
commit 2880325bda8d53566dcb9725abc929eec871608e upstream.
The ASMedia USB XHCI Controller claims to support generating PME# while in D0:
01:00.0 USB controller: ASMedia Technology Inc. Device 2142 (prog-if 30 [XHCI]) Subsystem: SUNIX Co., Ltd. Device 312b Capabilities: [78] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
However PME# only gets asserted when plugging USB 2.0 or USB 1.1 devices, but not for USB 3.0 devices.
Remove PCI_PM_CAP_PME_D0 to avoid using PME under D0.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205919 Link: https://lore.kernel.org/r/20191219192006.16270-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/pci/quirks.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
--- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -5282,3 +5282,14 @@ out_disable: DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, 0x13b1, PCI_CLASS_DISPLAY_VGA, 8, quirk_reset_lenovo_thinkpad_p50_nvgpu); + +/* + * Device [1b21:2142] + * When in D0, PME# doesn't get asserted when plugging USB 3.0 device. + */ +static void pci_fixup_no_d0_pme(struct pci_dev *dev) +{ + pci_info(dev, "PME# does not work under D0, disabling it\n"); + dev->pme_support &= ~(PCI_PM_CAP_PME_D0 >> PCI_PM_CAP_PME_SHIFT); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x2142, pci_fixup_no_d0_pme);