From: Chunfeng Yun chunfeng.yun@mediatek.com
[ Upstream commit 259714100d98b50bf04d36a21bf50ca8b829fc11 ]
When the dedicated wake IRQ is level trigger, and it uses the device's low-power status as the wakeup source, that means if the device is not in low-power state, the wake IRQ will be triggered if enabled; For this case, need enable the wake IRQ after running the device's ->runtime_suspend() which make it enter low-power state.
e.g. Assume the wake IRQ is a low level trigger type, and the wakeup signal comes from the low-power status of the device. The wakeup signal is low level at running time (0), and becomes high level when the device enters low-power state (runtime_suspend (1) is called), a wakeup event at (2) make the device exit low-power state, then the wakeup signal also becomes low level.
------------------ | ^ ^| ---------------- | | -------------- |<---(0)--->|<--(1)--| (3) (2) (4)
if enable the wake IRQ before running runtime_suspend during (0), a wake IRQ will arise, it causes resume immediately; it works if enable wake IRQ ( e.g. at (3) or (4)) after running ->runtime_suspend().
This patch introduces a new status WAKE_IRQ_DEDICATED_REVERSE to optionally support enabling wake IRQ after running ->runtime_suspend().
Suggested-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Chunfeng Yun chunfeng.yun@mediatek.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Stable-dep-of: 8527beb12087 ("PM: sleep: wakeirq: fix wake irq arming") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/base/power/power.h | 7 ++- drivers/base/power/runtime.c | 6 ++- drivers/base/power/wakeirq.c | 101 +++++++++++++++++++++++++++-------- include/linux/pm_wakeirq.h | 9 +++- 4 files changed, 96 insertions(+), 27 deletions(-)
diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index 54292cdd7808b..0eb7f02b3ad59 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -25,8 +25,10 @@ extern u64 pm_runtime_active_time(struct device *dev);
#define WAKE_IRQ_DEDICATED_ALLOCATED BIT(0) #define WAKE_IRQ_DEDICATED_MANAGED BIT(1) +#define WAKE_IRQ_DEDICATED_REVERSE BIT(2) #define WAKE_IRQ_DEDICATED_MASK (WAKE_IRQ_DEDICATED_ALLOCATED | \ - WAKE_IRQ_DEDICATED_MANAGED) + WAKE_IRQ_DEDICATED_MANAGED | \ + WAKE_IRQ_DEDICATED_REVERSE)
struct wake_irq { struct device *dev; @@ -39,7 +41,8 @@ extern void dev_pm_arm_wake_irq(struct wake_irq *wirq); extern void dev_pm_disarm_wake_irq(struct wake_irq *wirq); extern void dev_pm_enable_wake_irq_check(struct device *dev, bool can_change_status); -extern void dev_pm_disable_wake_irq_check(struct device *dev); +extern void dev_pm_disable_wake_irq_check(struct device *dev, bool cond_disable); +extern void dev_pm_enable_wake_irq_complete(struct device *dev);
#ifdef CONFIG_PM_SLEEP
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index c1142a7a4fe65..5824d41a0b745 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -673,6 +673,8 @@ static int rpm_suspend(struct device *dev, int rpmflags) if (retval) goto fail;
+ dev_pm_enable_wake_irq_complete(dev); + no_callback: __update_runtime_status(dev, RPM_SUSPENDED); pm_runtime_deactivate_timer(dev); @@ -718,7 +720,7 @@ static int rpm_suspend(struct device *dev, int rpmflags) return retval;
fail: - dev_pm_disable_wake_irq_check(dev); + dev_pm_disable_wake_irq_check(dev, true); __update_runtime_status(dev, RPM_ACTIVE); dev->power.deferred_resume = false; wake_up_all(&dev->power.wait_queue); @@ -901,7 +903,7 @@ static int rpm_resume(struct device *dev, int rpmflags)
callback = RPM_GET_CALLBACK(dev, runtime_resume);
- dev_pm_disable_wake_irq_check(dev); + dev_pm_disable_wake_irq_check(dev, false); retval = rpm_callback(callback, dev); if (retval) { __update_runtime_status(dev, RPM_SUSPENDED); diff --git a/drivers/base/power/wakeirq.c b/drivers/base/power/wakeirq.c index b91a3a9bf9f6d..0004db4a9d3b9 100644 --- a/drivers/base/power/wakeirq.c +++ b/drivers/base/power/wakeirq.c @@ -142,24 +142,7 @@ static irqreturn_t handle_threaded_wake_irq(int irq, void *_wirq) return IRQ_HANDLED; }
-/** - * dev_pm_set_dedicated_wake_irq - Request a dedicated wake-up interrupt - * @dev: Device entry - * @irq: Device wake-up interrupt - * - * Unless your hardware has separate wake-up interrupts in addition - * to the device IO interrupts, you don't need this. - * - * Sets up a threaded interrupt handler for a device that has - * a dedicated wake-up interrupt in addition to the device IO - * interrupt. - * - * The interrupt starts disabled, and needs to be managed for - * the device by the bus code or the device driver using - * dev_pm_enable_wake_irq() and dev_pm_disable_wake_irq() - * functions. - */ -int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq) +static int __dev_pm_set_dedicated_wake_irq(struct device *dev, int irq, unsigned int flag) { struct wake_irq *wirq; int err; @@ -197,7 +180,7 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq) if (err) goto err_free_irq;
- wirq->status = WAKE_IRQ_DEDICATED_ALLOCATED; + wirq->status = WAKE_IRQ_DEDICATED_ALLOCATED | flag;
return err;
@@ -210,8 +193,57 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq)
return err; } + + +/** + * dev_pm_set_dedicated_wake_irq - Request a dedicated wake-up interrupt + * @dev: Device entry + * @irq: Device wake-up interrupt + * + * Unless your hardware has separate wake-up interrupts in addition + * to the device IO interrupts, you don't need this. + * + * Sets up a threaded interrupt handler for a device that has + * a dedicated wake-up interrupt in addition to the device IO + * interrupt. + * + * The interrupt starts disabled, and needs to be managed for + * the device by the bus code or the device driver using + * dev_pm_enable_wake_irq*() and dev_pm_disable_wake_irq*() + * functions. + */ +int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq) +{ + return __dev_pm_set_dedicated_wake_irq(dev, irq, 0); +} EXPORT_SYMBOL_GPL(dev_pm_set_dedicated_wake_irq);
+/** + * dev_pm_set_dedicated_wake_irq_reverse - Request a dedicated wake-up interrupt + * with reverse enable ordering + * @dev: Device entry + * @irq: Device wake-up interrupt + * + * Unless your hardware has separate wake-up interrupts in addition + * to the device IO interrupts, you don't need this. + * + * Sets up a threaded interrupt handler for a device that has a dedicated + * wake-up interrupt in addition to the device IO interrupt. It sets + * the status of WAKE_IRQ_DEDICATED_REVERSE to tell rpm_suspend() + * to enable dedicated wake-up interrupt after running the runtime suspend + * callback for @dev. + * + * The interrupt starts disabled, and needs to be managed for + * the device by the bus code or the device driver using + * dev_pm_enable_wake_irq*() and dev_pm_disable_wake_irq*() + * functions. + */ +int dev_pm_set_dedicated_wake_irq_reverse(struct device *dev, int irq) +{ + return __dev_pm_set_dedicated_wake_irq(dev, irq, WAKE_IRQ_DEDICATED_REVERSE); +} +EXPORT_SYMBOL_GPL(dev_pm_set_dedicated_wake_irq_reverse); + /** * dev_pm_enable_wake_irq - Enable device wake-up interrupt * @dev: Device @@ -282,27 +314,54 @@ void dev_pm_enable_wake_irq_check(struct device *dev, return;
enable: - enable_irq(wirq->irq); + if (!can_change_status || !(wirq->status & WAKE_IRQ_DEDICATED_REVERSE)) + enable_irq(wirq->irq); }
/** * dev_pm_disable_wake_irq_check - Checks and disables wake-up interrupt * @dev: Device + * @cond_disable: if set, also check WAKE_IRQ_DEDICATED_REVERSE * * Disables wake-up interrupt conditionally based on status. * Should be only called from rpm_suspend() and rpm_resume() path. */ -void dev_pm_disable_wake_irq_check(struct device *dev) +void dev_pm_disable_wake_irq_check(struct device *dev, bool cond_disable) { struct wake_irq *wirq = dev->power.wakeirq;
if (!wirq || !(wirq->status & WAKE_IRQ_DEDICATED_MASK)) return;
+ if (cond_disable && (wirq->status & WAKE_IRQ_DEDICATED_REVERSE)) + return; + if (wirq->status & WAKE_IRQ_DEDICATED_MANAGED) disable_irq_nosync(wirq->irq); }
+/** + * dev_pm_enable_wake_irq_complete - enable wake IRQ not enabled before + * @dev: Device using the wake IRQ + * + * Enable wake IRQ conditionally based on status, mainly used if want to + * enable wake IRQ after running ->runtime_suspend() which depends on + * WAKE_IRQ_DEDICATED_REVERSE. + * + * Should be only called from rpm_suspend() path. + */ +void dev_pm_enable_wake_irq_complete(struct device *dev) +{ + struct wake_irq *wirq = dev->power.wakeirq; + + if (!wirq || !(wirq->status & WAKE_IRQ_DEDICATED_MASK)) + return; + + if (wirq->status & WAKE_IRQ_DEDICATED_MANAGED && + wirq->status & WAKE_IRQ_DEDICATED_REVERSE) + enable_irq(wirq->irq); +} + /** * dev_pm_arm_wake_irq - Arm device wake-up * @wirq: Device wake-up interrupt diff --git a/include/linux/pm_wakeirq.h b/include/linux/pm_wakeirq.h index cd5b62db90845..e63a63aa47a37 100644 --- a/include/linux/pm_wakeirq.h +++ b/include/linux/pm_wakeirq.h @@ -17,8 +17,8 @@ #ifdef CONFIG_PM
extern int dev_pm_set_wake_irq(struct device *dev, int irq); -extern int dev_pm_set_dedicated_wake_irq(struct device *dev, - int irq); +extern int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq); +extern int dev_pm_set_dedicated_wake_irq_reverse(struct device *dev, int irq); extern void dev_pm_clear_wake_irq(struct device *dev); extern void dev_pm_enable_wake_irq(struct device *dev); extern void dev_pm_disable_wake_irq(struct device *dev); @@ -35,6 +35,11 @@ static inline int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq) return 0; }
+static inline int dev_pm_set_dedicated_wake_irq_reverse(struct device *dev, int irq) +{ + return 0; +} + static inline void dev_pm_clear_wake_irq(struct device *dev) { }