From: Maxim Kochetkov fido_max@inbox.ru
[ Upstream commit f1bc9fc4a06de0108e0dca2a9a7e99ba1fc632f9 ]
64-bit DMA detection will fail if axienet was started before (by boot loader, boot ROM, etc). In this state axienet will not start properly. XAXIDMA_TX_CDESC_OFFSET + 4 register (MM2S_CURDESC_MSB) is used to detect 64-bit DMA capability here. But datasheet says: When DMACR.RS is 1 (axienet is in enabled state), CURDESC_PTR becomes Read Only (RO) and is used to fetch the first descriptor. So iowrite32()/ioread32() trick to this register to detect 64-bit DMA will not work. So move axienet reset before 64-bit DMA detection.
Fixes: f735c40ed93c ("net: axienet: Autodetect 64-bit DMA capability") Signed-off-by: Maxim Kochetkov fido_max@inbox.ru Reviewed-by: Robert Hancock robert.hancock@calian.com Reviewed-by: Radhey Shyam Pandey radhey.shyam.pandey@amd.com Link: https://lore.kernel.org/r/20230622192245.116864-1-fido_max@inbox.ru Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index d1d772580da98..d14648558338b 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -2043,6 +2043,11 @@ static int axienet_probe(struct platform_device *pdev) goto cleanup_clk; }
+ /* Reset core now that clocks are enabled, prior to accessing MDIO */ + ret = __axienet_device_reset(lp); + if (ret) + goto cleanup_clk; + /* Autodetect the need for 64-bit DMA pointers. * When the IP is configured for a bus width bigger than 32 bits, * writing the MSB registers is mandatory, even if they are all 0. @@ -2097,11 +2102,6 @@ static int axienet_probe(struct platform_device *pdev) lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD; lp->coalesce_usec_tx = XAXIDMA_DFT_TX_USEC;
- /* Reset core now that clocks are enabled, prior to accessing MDIO */ - ret = __axienet_device_reset(lp); - if (ret) - goto cleanup_clk; - ret = axienet_mdio_setup(lp); if (ret) dev_warn(&pdev->dev,