6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Clark james.clark@linaro.org
[ Upstream commit fa60c094c19b97e103d653f528f8d9c178b6a5f5 ]
In target mode, extra interrupts can be received between the end of a transfer and halting the module if the host continues sending more data. If the interrupt from this occurs after the reinit_completion() then the completion counter is left at a non-zero value. The next unrelated transfer initiated by userspace will then complete immediately without waiting for the interrupt or writing to the RX buffer.
Fix it by resetting the counter before the transfer so that lingering values are cleared. This is done after clearing the FIFOs and the status register but before the transfer is initiated, so no interrupts should be received at this point resulting in other race conditions.
Fixes: 4f5ee75ea171 ("spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion") Signed-off-by: James Clark james.clark@linaro.org Reviewed-by: Frank Li Frank.Li@nxp.com Link: https://patch.msgid.link/20250627-james-nxp-spi-dma-v4-1-178dba20c120@linaro... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-fsl-dspi.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 7c43df252328d..e26363ae74890 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -983,11 +983,20 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr, if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) { status = dspi_dma_xfer(dspi); } else { + /* + * Reinitialize the completion before transferring data + * to avoid the case where it might remain in the done + * state due to a spurious interrupt from a previous + * transfer. This could falsely signal that the current + * transfer has completed. + */ + if (dspi->irq) + reinit_completion(&dspi->xfer_done); + dspi_fifo_write(dspi);
if (dspi->irq) { wait_for_completion(&dspi->xfer_done); - reinit_completion(&dspi->xfer_done); } else { do { status = dspi_poll(dspi);