From: "Russell King (Oracle)" rmk+kernel@armlinux.org.uk
[ Upstream commit 23571c7b96437483d28a990c906cc81f5f66374e ]
We need to handle more quirks than just those which affect the link modes of the module. Move the quirk lookup into sfp.c, and pass the quirk to sfp-bus.c
Signed-off-by: Russell King (Oracle) rmk+kernel@armlinux.org.uk Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/sfp-bus.c | 98 ++------------------------------------- drivers/net/phy/sfp.c | 94 ++++++++++++++++++++++++++++++++++++- drivers/net/phy/sfp.h | 9 +++- 3 files changed, 104 insertions(+), 97 deletions(-)
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index 4369d6249e7b..267182d32bd5 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -10,12 +10,6 @@
#include "sfp.h"
-struct sfp_quirk { - const char *vendor; - const char *part; - void (*modes)(const struct sfp_eeprom_id *id, unsigned long *modes); -}; - /** * struct sfp_bus - internal representation of a sfp bus */ @@ -38,93 +32,6 @@ struct sfp_bus { bool started; };
-static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id, - unsigned long *modes) -{ - phylink_set(modes, 2500baseX_Full); -} - -static void sfp_quirk_ubnt_uf_instant(const struct sfp_eeprom_id *id, - unsigned long *modes) -{ - /* Ubiquiti U-Fiber Instant module claims that support all transceiver - * types including 10G Ethernet which is not truth. So clear all claimed - * modes and set only one mode which module supports: 1000baseX_Full. - */ - phylink_zero(modes); - phylink_set(modes, 1000baseX_Full); -} - -static const struct sfp_quirk sfp_quirks[] = { - { - // Alcatel Lucent G-010S-P can operate at 2500base-X, but - // incorrectly report 2500MBd NRZ in their EEPROM - .vendor = "ALCATELLUCENT", - .part = "G010SP", - .modes = sfp_quirk_2500basex, - }, { - // Alcatel Lucent G-010S-A can operate at 2500base-X, but - // report 3.2GBd NRZ in their EEPROM - .vendor = "ALCATELLUCENT", - .part = "3FE46541AA", - .modes = sfp_quirk_2500basex, - }, { - // Huawei MA5671A can operate at 2500base-X, but report 1.2GBd - // NRZ in their EEPROM - .vendor = "HUAWEI", - .part = "MA5671A", - .modes = sfp_quirk_2500basex, - }, { - // Lantech 8330-262D-E can operate at 2500base-X, but - // incorrectly report 2500MBd NRZ in their EEPROM - .vendor = "Lantech", - .part = "8330-262D-E", - .modes = sfp_quirk_2500basex, - }, { - .vendor = "UBNT", - .part = "UF-INSTANT", - .modes = sfp_quirk_ubnt_uf_instant, - }, -}; - -static size_t sfp_strlen(const char *str, size_t maxlen) -{ - size_t size, i; - - /* Trailing characters should be filled with space chars */ - for (i = 0, size = 0; i < maxlen; i++) - if (str[i] != ' ') - size = i + 1; - - return size; -} - -static bool sfp_match(const char *qs, const char *str, size_t len) -{ - if (!qs) - return true; - if (strlen(qs) != len) - return false; - return !strncmp(qs, str, len); -} - -static const struct sfp_quirk *sfp_lookup_quirk(const struct sfp_eeprom_id *id) -{ - const struct sfp_quirk *q; - unsigned int i; - size_t vs, ps; - - vs = sfp_strlen(id->base.vendor_name, ARRAY_SIZE(id->base.vendor_name)); - ps = sfp_strlen(id->base.vendor_pn, ARRAY_SIZE(id->base.vendor_pn)); - - for (i = 0, q = sfp_quirks; i < ARRAY_SIZE(sfp_quirks); i++, q++) - if (sfp_match(q->vendor, id->base.vendor_name, vs) && - sfp_match(q->part, id->base.vendor_pn, ps)) - return q; - - return NULL; -} - /** * sfp_parse_port() - Parse the EEPROM base ID, setting the port type * @bus: a pointer to the &struct sfp_bus structure for the sfp module @@ -786,12 +693,13 @@ void sfp_link_down(struct sfp_bus *bus) } EXPORT_SYMBOL_GPL(sfp_link_down);
-int sfp_module_insert(struct sfp_bus *bus, const struct sfp_eeprom_id *id) +int sfp_module_insert(struct sfp_bus *bus, const struct sfp_eeprom_id *id, + const struct sfp_quirk *quirk) { const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus); int ret = 0;
- bus->sfp_quirk = sfp_lookup_quirk(id); + bus->sfp_quirk = quirk;
if (ops && ops->module_insert) ret = ops->module_insert(bus->upstream, id); diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index e5cbd5b117cc..4ba61f16ceb6 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -253,6 +253,8 @@ struct sfp { unsigned int module_t_start_up; bool tx_fault_ignore;
+ const struct sfp_quirk *quirk; + #if IS_ENABLED(CONFIG_HWMON) struct sfp_diag diag; struct delayed_work hwmon_probe; @@ -309,6 +311,93 @@ static const struct of_device_id sfp_of_match[] = { }; MODULE_DEVICE_TABLE(of, sfp_of_match);
+static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id, + unsigned long *modes) +{ + linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseX_Full_BIT, modes); +} + +static void sfp_quirk_ubnt_uf_instant(const struct sfp_eeprom_id *id, + unsigned long *modes) +{ + /* Ubiquiti U-Fiber Instant module claims that support all transceiver + * types including 10G Ethernet which is not truth. So clear all claimed + * modes and set only one mode which module supports: 1000baseX_Full. + */ + linkmode_zero(modes); + linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, modes); +} + +static const struct sfp_quirk sfp_quirks[] = { + { + // Alcatel Lucent G-010S-P can operate at 2500base-X, but + // incorrectly report 2500MBd NRZ in their EEPROM + .vendor = "ALCATELLUCENT", + .part = "G010SP", + .modes = sfp_quirk_2500basex, + }, { + // Alcatel Lucent G-010S-A can operate at 2500base-X, but + // report 3.2GBd NRZ in their EEPROM + .vendor = "ALCATELLUCENT", + .part = "3FE46541AA", + .modes = sfp_quirk_2500basex, + }, { + // Huawei MA5671A can operate at 2500base-X, but report 1.2GBd + // NRZ in their EEPROM + .vendor = "HUAWEI", + .part = "MA5671A", + .modes = sfp_quirk_2500basex, + }, { + // Lantech 8330-262D-E can operate at 2500base-X, but + // incorrectly report 2500MBd NRZ in their EEPROM + .vendor = "Lantech", + .part = "8330-262D-E", + .modes = sfp_quirk_2500basex, + }, { + .vendor = "UBNT", + .part = "UF-INSTANT", + .modes = sfp_quirk_ubnt_uf_instant, + }, +}; + +static size_t sfp_strlen(const char *str, size_t maxlen) +{ + size_t size, i; + + /* Trailing characters should be filled with space chars */ + for (i = 0, size = 0; i < maxlen; i++) + if (str[i] != ' ') + size = i + 1; + + return size; +} + +static bool sfp_match(const char *qs, const char *str, size_t len) +{ + if (!qs) + return true; + if (strlen(qs) != len) + return false; + return !strncmp(qs, str, len); +} + +static const struct sfp_quirk *sfp_lookup_quirk(const struct sfp_eeprom_id *id) +{ + const struct sfp_quirk *q; + unsigned int i; + size_t vs, ps; + + vs = sfp_strlen(id->base.vendor_name, ARRAY_SIZE(id->base.vendor_name)); + ps = sfp_strlen(id->base.vendor_pn, ARRAY_SIZE(id->base.vendor_pn)); + + for (i = 0, q = sfp_quirks; i < ARRAY_SIZE(sfp_quirks); i++, q++) + if (sfp_match(q->vendor, id->base.vendor_name, vs) && + sfp_match(q->part, id->base.vendor_pn, ps)) + return q; + + return NULL; +} + static unsigned long poll_jiffies;
static unsigned int sfp_gpio_get_state(struct sfp *sfp) @@ -1964,6 +2053,8 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report) else sfp->tx_fault_ignore = false;
+ sfp->quirk = sfp_lookup_quirk(&id); + return 0; }
@@ -2075,7 +2166,8 @@ static void sfp_sm_module(struct sfp *sfp, unsigned int event) break;
/* Report the module insertion to the upstream device */ - err = sfp_module_insert(sfp->sfp_bus, &sfp->id); + err = sfp_module_insert(sfp->sfp_bus, &sfp->id, + sfp->quirk); if (err < 0) { sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0); break; diff --git a/drivers/net/phy/sfp.h b/drivers/net/phy/sfp.h index 27226535c72b..03f1d47fe6ca 100644 --- a/drivers/net/phy/sfp.h +++ b/drivers/net/phy/sfp.h @@ -6,6 +6,12 @@
struct sfp;
+struct sfp_quirk { + const char *vendor; + const char *part; + void (*modes)(const struct sfp_eeprom_id *id, unsigned long *modes); +}; + struct sfp_socket_ops { void (*attach)(struct sfp *sfp); void (*detach)(struct sfp *sfp); @@ -23,7 +29,8 @@ int sfp_add_phy(struct sfp_bus *bus, struct phy_device *phydev); void sfp_remove_phy(struct sfp_bus *bus); void sfp_link_up(struct sfp_bus *bus); void sfp_link_down(struct sfp_bus *bus); -int sfp_module_insert(struct sfp_bus *bus, const struct sfp_eeprom_id *id); +int sfp_module_insert(struct sfp_bus *bus, const struct sfp_eeprom_id *id, + const struct sfp_quirk *quirk); void sfp_module_remove(struct sfp_bus *bus); int sfp_module_start(struct sfp_bus *bus); void sfp_module_stop(struct sfp_bus *bus);