4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
When building tools/perf/ it rightly complains about a number of .h files being out of sync. Fix this up by syncing them properly with the relevant in-kernel versions.
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- tools/arch/arm/include/uapi/asm/kvm.h | 13 ++ tools/arch/arm64/include/uapi/asm/kvm.h | 6 + tools/arch/powerpc/include/uapi/asm/kvm.h | 1 tools/arch/s390/include/uapi/asm/kvm.h | 5 tools/arch/x86/include/asm/cpufeatures.h | 44 ++++++- tools/arch/x86/include/asm/disabled-features.h | 7 - tools/arch/x86/include/asm/required-features.h | 3 tools/include/uapi/asm-generic/mman-common.h | 5 tools/include/uapi/linux/bpf.h | 51 ++++++++ tools/include/uapi/linux/fcntl.h | 5 tools/include/uapi/linux/stat.h | 131 ---------------------- tools/perf/arch/x86/entry/syscalls/syscall_64.tbl | 7 - 12 files changed, 132 insertions(+), 146 deletions(-)
--- a/tools/arch/arm/include/uapi/asm/kvm.h +++ b/tools/arch/arm/include/uapi/asm/kvm.h @@ -84,6 +84,13 @@ struct kvm_regs { #define KVM_VGIC_V2_DIST_SIZE 0x1000 #define KVM_VGIC_V2_CPU_SIZE 0x2000
+/* Supported VGICv3 address types */ +#define KVM_VGIC_V3_ADDR_TYPE_DIST 2 +#define KVM_VGIC_V3_ADDR_TYPE_REDIST 3 + +#define KVM_VGIC_V3_DIST_SIZE SZ_64K +#define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K) + #define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */ #define KVM_ARM_VCPU_PSCI_0_2 1 /* CPU uses PSCI v0.2 */
@@ -166,6 +173,12 @@ struct kvm_arch_memory_slot { #define KVM_REG_ARM_VFP_FPINST 0x1009 #define KVM_REG_ARM_VFP_FPINST2 0x100A
+/* KVM-as-firmware specific pseudo-registers */ +#define KVM_REG_ARM_FW (0x0014 << KVM_REG_ARM_COPROC_SHIFT) +#define KVM_REG_ARM_FW_REG(r) (KVM_REG_ARM | KVM_REG_SIZE_U64 | \ + KVM_REG_ARM_FW | ((r) & 0xffff)) +#define KVM_REG_ARM_PSCI_VERSION KVM_REG_ARM_FW_REG(0) + /* Device Control API: ARM VGIC */ #define KVM_DEV_ARM_VGIC_GRP_ADDR 0 #define KVM_DEV_ARM_VGIC_GRP_DIST_REGS 1 --- a/tools/arch/arm64/include/uapi/asm/kvm.h +++ b/tools/arch/arm64/include/uapi/asm/kvm.h @@ -195,6 +195,12 @@ struct kvm_arch_memory_slot { #define KVM_REG_ARM_TIMER_CNT ARM64_SYS_REG(3, 3, 14, 3, 2) #define KVM_REG_ARM_TIMER_CVAL ARM64_SYS_REG(3, 3, 14, 0, 2)
+/* KVM-as-firmware specific pseudo-registers */ +#define KVM_REG_ARM_FW (0x0014 << KVM_REG_ARM_COPROC_SHIFT) +#define KVM_REG_ARM_FW_REG(r) (KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \ + KVM_REG_ARM_FW | ((r) & 0xffff)) +#define KVM_REG_ARM_PSCI_VERSION KVM_REG_ARM_FW_REG(0) + /* Device Control API: ARM VGIC */ #define KVM_DEV_ARM_VGIC_GRP_ADDR 0 #define KVM_DEV_ARM_VGIC_GRP_DIST_REGS 1 --- a/tools/arch/powerpc/include/uapi/asm/kvm.h +++ b/tools/arch/powerpc/include/uapi/asm/kvm.h @@ -596,6 +596,7 @@ struct kvm_get_htab_header { #define KVM_REG_PPC_TM_VSCR (KVM_REG_PPC_TM | KVM_REG_SIZE_U32 | 0x67) #define KVM_REG_PPC_TM_DSCR (KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x68) #define KVM_REG_PPC_TM_TAR (KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x69) +#define KVM_REG_PPC_TM_XER (KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x6a)
/* PPC64 eXternal Interrupt Controller Specification */ #define KVM_DEV_XICS_GRP_SOURCES 1 /* 64-bit source attributes */ --- a/tools/arch/s390/include/uapi/asm/kvm.h +++ b/tools/arch/s390/include/uapi/asm/kvm.h @@ -197,6 +197,7 @@ struct kvm_guest_debug_arch { #define KVM_SYNC_VRS (1UL << 6) #define KVM_SYNC_RICCB (1UL << 7) #define KVM_SYNC_FPRS (1UL << 8) +#define KVM_SYNC_BPBC (1UL << 10) /* definition of registers in kvm_run */ struct kvm_sync_regs { __u64 prefix; /* prefix register */ @@ -217,7 +218,9 @@ struct kvm_sync_regs { }; __u8 reserved[512]; /* for future vector expansion */ __u32 fpc; /* valid on KVM_SYNC_VRS or KVM_SYNC_FPRS */ - __u8 padding[52]; /* riccb needs to be 64byte aligned */ + __u8 bpbc : 1; /* bp mode */ + __u8 reserved2 : 7; + __u8 padding1[51]; /* riccb needs to be 64byte aligned */ __u8 riccb[64]; /* runtime instrumentation controls block */ };
--- a/tools/arch/x86/include/asm/cpufeatures.h +++ b/tools/arch/x86/include/asm/cpufeatures.h @@ -12,7 +12,7 @@ /* * Defines x86 CPU feature bits */ -#define NCAPINTS 18 /* N 32-bit words worth of info */ +#define NCAPINTS 19 /* N 32-bit words worth of info */ #define NBUGINTS 1 /* N 32-bit bug flags */
/* @@ -189,17 +189,32 @@
#define X86_FEATURE_CPB ( 7*32+ 2) /* AMD Core Performance Boost */ #define X86_FEATURE_EPB ( 7*32+ 3) /* IA32_ENERGY_PERF_BIAS support */ +#define X86_FEATURE_INVPCID_SINGLE ( 7*32+ 4) /* Effectively INVPCID && CR4.PCIDE=1 */
#define X86_FEATURE_HW_PSTATE ( 7*32+ 8) /* AMD HW-PState */ #define X86_FEATURE_PROC_FEEDBACK ( 7*32+ 9) /* AMD ProcFeedbackInterface */
-#define X86_FEATURE_INTEL_PT ( 7*32+15) /* Intel Processor Trace */ -#define X86_FEATURE_AVX512_4VNNIW (7*32+16) /* AVX-512 Neural Network Instructions */ -#define X86_FEATURE_AVX512_4FMAPS (7*32+17) /* AVX-512 Multiply Accumulation Single precision */ +#define X86_FEATURE_RETPOLINE ( 7*32+12) /* "" Generic Retpoline mitigation for Spectre variant 2 */ +#define X86_FEATURE_RETPOLINE_AMD ( 7*32+13) /* "" AMD Retpoline mitigation for Spectre variant 2 */ + +#define X86_FEATURE_MSR_SPEC_CTRL ( 7*32+16) /* "" MSR SPEC_CTRL is implemented */ +#define X86_FEATURE_SSBD ( 7*32+17) /* Speculative Store Bypass Disable */ + +#define X86_FEATURE_RSB_CTXSW ( 7*32+19) /* "" Fill RSB on context switches */
/* Because the ALTERNATIVE scheme is for members of the X86_FEATURE club... */ #define X86_FEATURE_KAISER ( 7*32+31) /* CONFIG_PAGE_TABLE_ISOLATION w/o nokaiser */
+#define X86_FEATURE_USE_IBPB ( 7*32+21) /* "" Indirect Branch Prediction Barrier enabled */ +#define X86_FEATURE_USE_IBRS_FW ( 7*32+22) /* "" Use IBRS during runtime firmware calls */ +#define X86_FEATURE_SPEC_STORE_BYPASS_DISABLE ( 7*32+23) /* "" Disable Speculative Store Bypass. */ +#define X86_FEATURE_LS_CFG_SSBD ( 7*32+24) /* "" AMD SSBD implementation */ +#define X86_FEATURE_IBRS ( 7*32+25) /* Indirect Branch Restricted Speculation */ +#define X86_FEATURE_IBPB ( 7*32+26) /* Indirect Branch Prediction Barrier */ +#define X86_FEATURE_STIBP ( 7*32+27) /* Single Thread Indirect Branch Predictors */ +#define X86_FEATURE_ZEN ( 7*32+28) /* "" CPU is AMD family 0x17 (Zen) */ + + /* Virtualization flags: Linux defined, word 8 */ #define X86_FEATURE_TPR_SHADOW ( 8*32+ 0) /* Intel TPR Shadow */ #define X86_FEATURE_VNMI ( 8*32+ 1) /* Intel Virtual NMI */ @@ -231,6 +246,7 @@ #define X86_FEATURE_SMAP ( 9*32+20) /* Supervisor Mode Access Prevention */ #define X86_FEATURE_CLFLUSHOPT ( 9*32+23) /* CLFLUSHOPT instruction */ #define X86_FEATURE_CLWB ( 9*32+24) /* CLWB instruction */ +#define X86_FEATURE_INTEL_PT ( 9*32+25) /* Intel Processor Trace */ #define X86_FEATURE_AVX512PF ( 9*32+26) /* AVX-512 Prefetch */ #define X86_FEATURE_AVX512ER ( 9*32+27) /* AVX-512 Exponential and Reciprocal */ #define X86_FEATURE_AVX512CD ( 9*32+28) /* AVX-512 Conflict Detection */ @@ -255,6 +271,10 @@ /* AMD-defined CPU features, CPUID level 0x80000008 (ebx), word 13 */ #define X86_FEATURE_CLZERO (13*32+0) /* CLZERO instruction */ #define X86_FEATURE_IRPERF (13*32+1) /* Instructions Retired Count */ +#define X86_FEATURE_AMD_IBPB (13*32+12) /* Indirect Branch Prediction Barrier */ +#define X86_FEATURE_AMD_IBRS (13*32+14) /* Indirect Branch Restricted Speculation */ +#define X86_FEATURE_AMD_STIBP (13*32+15) /* Single Thread Indirect Branch Predictors */ +#define X86_FEATURE_VIRT_SSBD (13*32+25) /* Virtualized Speculative Store Bypass Disable */
/* Thermal and Power Management Leaf, CPUID level 0x00000006 (eax), word 14 */ #define X86_FEATURE_DTHERM (14*32+ 0) /* Digital Thermal Sensor */ @@ -290,6 +310,16 @@ #define X86_FEATURE_SUCCOR (17*32+1) /* Uncorrectable error containment and recovery */ #define X86_FEATURE_SMCA (17*32+3) /* Scalable MCA */
+ +/* Intel-defined CPU features, CPUID level 0x00000007:0 (EDX), word 18 */ +#define X86_FEATURE_AVX512_4VNNIW (18*32+ 2) /* AVX-512 Neural Network Instructions */ +#define X86_FEATURE_AVX512_4FMAPS (18*32+ 3) /* AVX-512 Multiply Accumulation Single precision */ +#define X86_FEATURE_PCONFIG (18*32+18) /* Intel PCONFIG */ +#define X86_FEATURE_SPEC_CTRL (18*32+26) /* "" Speculation Control (IBRS + IBPB) */ +#define X86_FEATURE_INTEL_STIBP (18*32+27) /* "" Single Thread Indirect Branch Predictors */ +#define X86_FEATURE_ARCH_CAPABILITIES (18*32+29) /* IA32_ARCH_CAPABILITIES MSR (Intel) */ +#define X86_FEATURE_SPEC_CTRL_SSBD (18*32+31) /* "" Speculative Store Bypass Disable */ + /* * BUG word(s) */ @@ -314,4 +344,10 @@ #define X86_BUG_NULL_SEG X86_BUG(10) /* Nulling a selector preserves the base */ #define X86_BUG_SWAPGS_FENCE X86_BUG(11) /* SWAPGS without input dep on GS */ #define X86_BUG_MONITOR X86_BUG(12) /* IPI required to wake up remote CPU */ +#define X86_BUG_AMD_E400 X86_BUG(13) /* CPU is among the affected by Erratum 400 */ +#define X86_BUG_CPU_MELTDOWN X86_BUG(14) /* CPU is affected by meltdown attack and needs kernel page table isolation */ +#define X86_BUG_SPECTRE_V1 X86_BUG(15) /* CPU is affected by Spectre variant 1 attack with conditional branches */ +#define X86_BUG_SPECTRE_V2 X86_BUG(16) /* CPU is affected by Spectre variant 2 attack with indirect branches */ +#define X86_BUG_SPEC_STORE_BYPASS X86_BUG(17) /* CPU is affected by speculative store bypass attack */ + #endif /* _ASM_X86_CPUFEATURES_H */ --- a/tools/arch/x86/include/asm/disabled-features.h +++ b/tools/arch/x86/include/asm/disabled-features.h @@ -21,11 +21,13 @@ # define DISABLE_K6_MTRR (1<<(X86_FEATURE_K6_MTRR & 31)) # define DISABLE_CYRIX_ARR (1<<(X86_FEATURE_CYRIX_ARR & 31)) # define DISABLE_CENTAUR_MCR (1<<(X86_FEATURE_CENTAUR_MCR & 31)) +# define DISABLE_PCID 0 #else # define DISABLE_VME 0 # define DISABLE_K6_MTRR 0 # define DISABLE_CYRIX_ARR 0 # define DISABLE_CENTAUR_MCR 0 +# define DISABLE_PCID (1<<(X86_FEATURE_PCID & 31)) #endif /* CONFIG_X86_64 */
#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS @@ -43,7 +45,7 @@ #define DISABLED_MASK1 0 #define DISABLED_MASK2 0 #define DISABLED_MASK3 (DISABLE_CYRIX_ARR|DISABLE_CENTAUR_MCR|DISABLE_K6_MTRR) -#define DISABLED_MASK4 0 +#define DISABLED_MASK4 (DISABLE_PCID) #define DISABLED_MASK5 0 #define DISABLED_MASK6 0 #define DISABLED_MASK7 0 @@ -57,6 +59,7 @@ #define DISABLED_MASK15 0 #define DISABLED_MASK16 (DISABLE_PKU|DISABLE_OSPKE) #define DISABLED_MASK17 0 -#define DISABLED_MASK_CHECK BUILD_BUG_ON_ZERO(NCAPINTS != 18) +#define DISABLED_MASK18 0 +#define DISABLED_MASK_CHECK BUILD_BUG_ON_ZERO(NCAPINTS != 19)
#endif /* _ASM_X86_DISABLED_FEATURES_H */ --- a/tools/arch/x86/include/asm/required-features.h +++ b/tools/arch/x86/include/asm/required-features.h @@ -100,6 +100,7 @@ #define REQUIRED_MASK15 0 #define REQUIRED_MASK16 0 #define REQUIRED_MASK17 0 -#define REQUIRED_MASK_CHECK BUILD_BUG_ON_ZERO(NCAPINTS != 18) +#define REQUIRED_MASK18 0 +#define REQUIRED_MASK_CHECK BUILD_BUG_ON_ZERO(NCAPINTS != 19)
#endif /* _ASM_X86_REQUIRED_FEATURES_H */ --- a/tools/include/uapi/asm-generic/mman-common.h +++ b/tools/include/uapi/asm-generic/mman-common.h @@ -72,4 +72,9 @@ #define MAP_HUGE_SHIFT 26 #define MAP_HUGE_MASK 0x3f
+#define PKEY_DISABLE_ACCESS 0x1 +#define PKEY_DISABLE_WRITE 0x2 +#define PKEY_ACCESS_MASK (PKEY_DISABLE_ACCESS |\ + PKEY_DISABLE_WRITE) + #endif /* __ASM_GENERIC_MMAN_COMMON_H */ --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -95,6 +95,7 @@ enum bpf_prog_type { BPF_PROG_TYPE_SCHED_ACT, BPF_PROG_TYPE_TRACEPOINT, BPF_PROG_TYPE_XDP, + BPF_PROG_TYPE_PERF_EVENT, };
#define BPF_PSEUDO_MAP_FD 1 @@ -375,6 +376,56 @@ enum bpf_func_id { */ BPF_FUNC_probe_write_user,
+ /** + * bpf_current_task_under_cgroup(map, index) - Check cgroup2 membership of current task + * @map: pointer to bpf_map in BPF_MAP_TYPE_CGROUP_ARRAY type + * @index: index of the cgroup in the bpf_map + * Return: + * == 0 current failed the cgroup2 descendant test + * == 1 current succeeded the cgroup2 descendant test + * < 0 error + */ + BPF_FUNC_current_task_under_cgroup, + + /** + * bpf_skb_change_tail(skb, len, flags) + * The helper will resize the skb to the given new size, + * to be used f.e. with control messages. + * @skb: pointer to skb + * @len: new skb length + * @flags: reserved + * Return: 0 on success or negative error + */ + BPF_FUNC_skb_change_tail, + + /** + * bpf_skb_pull_data(skb, len) + * The helper will pull in non-linear data in case the + * skb is non-linear and not all of len are part of the + * linear section. Only needed for read/write with direct + * packet access. + * @skb: pointer to skb + * @len: len to make read/writeable + * Return: 0 on success or negative error + */ + BPF_FUNC_skb_pull_data, + + /** + * bpf_csum_update(skb, csum) + * Adds csum into skb->csum in case of CHECKSUM_COMPLETE. + * @skb: pointer to skb + * @csum: csum to add + * Return: csum on success or negative error + */ + BPF_FUNC_csum_update, + + /** + * bpf_set_hash_invalid(skb) + * Invalidate current skb>hash. + * @skb: pointer to skb + */ + BPF_FUNC_set_hash_invalid, + __BPF_FUNC_MAX_ID, };
--- a/tools/include/uapi/linux/fcntl.h +++ b/tools/include/uapi/linux/fcntl.h @@ -63,10 +63,5 @@ #define AT_NO_AUTOMOUNT 0x800 /* Suppress terminal automount traversal */ #define AT_EMPTY_PATH 0x1000 /* Allow empty relative pathname */
-#define AT_STATX_SYNC_TYPE 0x6000 /* Type of synchronisation required from statx() */ -#define AT_STATX_SYNC_AS_STAT 0x0000 /* - Do whatever stat() does */ -#define AT_STATX_FORCE_SYNC 0x2000 /* - Force the attributes to be sync'd with the server */ -#define AT_STATX_DONT_SYNC 0x4000 /* - Don't sync attributes with the server */ -
#endif /* _UAPI_LINUX_FCNTL_H */ --- a/tools/include/uapi/linux/stat.h +++ b/tools/include/uapi/linux/stat.h @@ -1,7 +1,6 @@ #ifndef _UAPI_LINUX_STAT_H #define _UAPI_LINUX_STAT_H
-#include <linux/types.h>
#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
@@ -42,135 +41,5 @@
#endif
-/* - * Timestamp structure for the timestamps in struct statx. - * - * tv_sec holds the number of seconds before (negative) or after (positive) - * 00:00:00 1st January 1970 UTC. - * - * tv_nsec holds a number of nanoseconds before (0..-999,999,999 if tv_sec is - * negative) or after (0..999,999,999 if tv_sec is positive) the tv_sec time. - * - * Note that if both tv_sec and tv_nsec are non-zero, then the two values must - * either be both positive or both negative. - * - * __reserved is held in case we need a yet finer resolution. - */ -struct statx_timestamp { - __s64 tv_sec; - __s32 tv_nsec; - __s32 __reserved; -}; - -/* - * Structures for the extended file attribute retrieval system call - * (statx()). - * - * The caller passes a mask of what they're specifically interested in as a - * parameter to statx(). What statx() actually got will be indicated in - * st_mask upon return. - * - * For each bit in the mask argument: - * - * - if the datum is not supported: - * - * - the bit will be cleared, and - * - * - the datum will be set to an appropriate fabricated value if one is - * available (eg. CIFS can take a default uid and gid), otherwise - * - * - the field will be cleared; - * - * - otherwise, if explicitly requested: - * - * - the datum will be synchronised to the server if AT_STATX_FORCE_SYNC is - * set or if the datum is considered out of date, and - * - * - the field will be filled in and the bit will be set; - * - * - otherwise, if not requested, but available in approximate form without any - * effort, it will be filled in anyway, and the bit will be set upon return - * (it might not be up to date, however, and no attempt will be made to - * synchronise the internal state first); - * - * - otherwise the field and the bit will be cleared before returning. - * - * Items in STATX_BASIC_STATS may be marked unavailable on return, but they - * will have values installed for compatibility purposes so that stat() and - * co. can be emulated in userspace. - */ -struct statx { - /* 0x00 */ - __u32 stx_mask; /* What results were written [uncond] */ - __u32 stx_blksize; /* Preferred general I/O size [uncond] */ - __u64 stx_attributes; /* Flags conveying information about the file [uncond] */ - /* 0x10 */ - __u32 stx_nlink; /* Number of hard links */ - __u32 stx_uid; /* User ID of owner */ - __u32 stx_gid; /* Group ID of owner */ - __u16 stx_mode; /* File mode */ - __u16 __spare0[1]; - /* 0x20 */ - __u64 stx_ino; /* Inode number */ - __u64 stx_size; /* File size */ - __u64 stx_blocks; /* Number of 512-byte blocks allocated */ - __u64 __spare1[1]; - /* 0x40 */ - struct statx_timestamp stx_atime; /* Last access time */ - struct statx_timestamp stx_btime; /* File creation time */ - struct statx_timestamp stx_ctime; /* Last attribute change time */ - struct statx_timestamp stx_mtime; /* Last data modification time */ - /* 0x80 */ - __u32 stx_rdev_major; /* Device ID of special file [if bdev/cdev] */ - __u32 stx_rdev_minor; - __u32 stx_dev_major; /* ID of device containing file [uncond] */ - __u32 stx_dev_minor; - /* 0x90 */ - __u64 __spare2[14]; /* Spare space for future expansion */ - /* 0x100 */ -}; - -/* - * Flags to be stx_mask - * - * Query request/result mask for statx() and struct statx::stx_mask. - * - * These bits should be set in the mask argument of statx() to request - * particular items when calling statx(). - */ -#define STATX_TYPE 0x00000001U /* Want/got stx_mode & S_IFMT */ -#define STATX_MODE 0x00000002U /* Want/got stx_mode & ~S_IFMT */ -#define STATX_NLINK 0x00000004U /* Want/got stx_nlink */ -#define STATX_UID 0x00000008U /* Want/got stx_uid */ -#define STATX_GID 0x00000010U /* Want/got stx_gid */ -#define STATX_ATIME 0x00000020U /* Want/got stx_atime */ -#define STATX_MTIME 0x00000040U /* Want/got stx_mtime */ -#define STATX_CTIME 0x00000080U /* Want/got stx_ctime */ -#define STATX_INO 0x00000100U /* Want/got stx_ino */ -#define STATX_SIZE 0x00000200U /* Want/got stx_size */ -#define STATX_BLOCKS 0x00000400U /* Want/got stx_blocks */ -#define STATX_BASIC_STATS 0x000007ffU /* The stuff in the normal stat struct */ -#define STATX_BTIME 0x00000800U /* Want/got stx_btime */ -#define STATX_ALL 0x00000fffU /* All currently supported flags */ - -/* - * Attributes to be found in stx_attributes - * - * These give information about the features or the state of a file that might - * be of use to ordinary userspace programs such as GUIs or ls rather than - * specialised tools. - * - * Note that the flags marked [I] correspond to generic FS_IOC_FLAGS - * semantically. Where possible, the numerical value is picked to correspond - * also. - */ -#define STATX_ATTR_COMPRESSED 0x00000004 /* [I] File is compressed by the fs */ -#define STATX_ATTR_IMMUTABLE 0x00000010 /* [I] File is marked immutable */ -#define STATX_ATTR_APPEND 0x00000020 /* [I] File is append-only */ -#define STATX_ATTR_NODUMP 0x00000040 /* [I] File is not to be dumped */ -#define STATX_ATTR_ENCRYPTED 0x00000800 /* [I] File requires key to decrypt in fs */ - -#define STATX_ATTR_AUTOMOUNT 0x00001000 /* Dir: Automount trigger */ -
#endif /* _UAPI_LINUX_STAT_H */ --- a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl +++ b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl @@ -335,6 +335,9 @@ 326 common copy_file_range sys_copy_file_range 327 64 preadv2 sys_preadv2 328 64 pwritev2 sys_pwritev2 +329 common pkey_mprotect sys_pkey_mprotect +330 common pkey_alloc sys_pkey_alloc +331 common pkey_free sys_pkey_free
# # x32-specific system call numbers start at 512 to avoid cache impact @@ -374,5 +377,5 @@ 543 x32 io_setup compat_sys_io_setup 544 x32 io_submit compat_sys_io_submit 545 x32 execveat compat_sys_execveat/ptregs -534 x32 preadv2 compat_sys_preadv2 -535 x32 pwritev2 compat_sys_pwritev2 +546 x32 preadv2 compat_sys_preadv64v2 +547 x32 pwritev2 compat_sys_pwritev64v2