From: Shruthi Sanil shruthi.sanil@intel.com
[ Upstream commit 29353816300c79cb5157ed2719cc71285c7b77aa ]
The pretimeout register has a default reset value. Hence when a smaller WDT timeout is set which would be lesser than the default pretimeout, the system behaves abnormally, starts triggering the pretimeout interrupt even when the WDT is not enabled, most of the times leading to system crash. Hence an update in the pre-timeout is also required for the default timeout that is being configured.
Fixes: fa0f8d51e90d ("watchdog: Add watchdog driver for Intel Keembay Soc") Reviewed-by: Guenter Roeck linux@roeck-us.net Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Tested-by: Kris Pan kris.pan@intel.com Signed-off-by: Shruthi Sanil shruthi.sanil@intel.com Link: https://lore.kernel.org/r/20210517174953.19404-2-shruthi.sanil@intel.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Wim Van Sebroeck wim@linux-watchdog.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/watchdog/keembay_wdt.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/watchdog/keembay_wdt.c b/drivers/watchdog/keembay_wdt.c index 547d3fea33ff..f2f5c9fae29c 100644 --- a/drivers/watchdog/keembay_wdt.c +++ b/drivers/watchdog/keembay_wdt.c @@ -29,6 +29,7 @@ #define WDT_LOAD_MAX U32_MAX #define WDT_LOAD_MIN 1 #define WDT_TIMEOUT 5 +#define WDT_PRETIMEOUT 4
static unsigned int timeout = WDT_TIMEOUT; module_param(timeout, int, 0); @@ -224,11 +225,13 @@ static int keembay_wdt_probe(struct platform_device *pdev) wdt->wdd.min_timeout = WDT_LOAD_MIN; wdt->wdd.max_timeout = WDT_LOAD_MAX / wdt->rate; wdt->wdd.timeout = WDT_TIMEOUT; + wdt->wdd.pretimeout = WDT_PRETIMEOUT;
watchdog_set_drvdata(&wdt->wdd, wdt); watchdog_set_nowayout(&wdt->wdd, nowayout); watchdog_init_timeout(&wdt->wdd, timeout, dev); keembay_wdt_set_timeout(&wdt->wdd, wdt->wdd.timeout); + keembay_wdt_set_pretimeout(&wdt->wdd, wdt->wdd.pretimeout);
ret = devm_watchdog_register_device(dev, &wdt->wdd); if (ret)